The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-11-2008, 11:14 PM   #1
HuggerCST
Registered User
 
HuggerCST's Avatar
 
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,500
HuggerCST's '70 SWB CST build

I bought this truck in June of '99. It was in descent shape with the usual rusty cab corners and rockers, and the engine had a dead miss, but I liked it alot, so I bought it. I got it home and tried to tune it up, but the dead cylinder had no compression(valve), and it drove my crazy, so I had to tear into it. My plan was to rebuild the engine, fix the rust, repaint it, and drive it. That plan didn't last long. Here's what I started with.
Attached Images
    
__________________
Wynne
70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, cruise, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, posi, shoulder belts, 2.5"/4" drop, 17" Torq thrust 2s.
Build thread
53 Chevy shortbed
69 Camaro

Click here to subscribe
Chevy GMC International Truck Club Louisiana Charter Member
http://www.louisianaclassictruckclub.com
HuggerCST is offline   Reply With Quote
Old 06-11-2008, 11:24 PM   #2
HuggerCST
Registered User
 
HuggerCST's Avatar
 
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,500
Re: HuggerCST's '70 SWB CST build

I tore it down and one thing led to another. The original engine was in great shape other than the heads. My brother in law owned a machine shop, so he helped me rework the engine. He bored it .020, turned the crank .010, and kept it original other than an RV cam. Since most everything was still there and so original under the hood, I decided to keep everything that way, other than HEI. I figured that I could always add some goodies later. I didn't go into detail on the frame and suspension, because I knew that it wouldn't stay that way if I drove it much, and I have a long dirt driveway. I cleaned it up, reworked the brakes, and repainted it. I also replaced the rockers and cab corners, then painted the cab inside and out. I couldn't find any pics of when I had the cab off.
Attached Images
   
__________________
Wynne
70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, cruise, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, posi, shoulder belts, 2.5"/4" drop, 17" Torq thrust 2s.
Build thread
53 Chevy shortbed
69 Camaro

Click here to subscribe
Chevy GMC International Truck Club Louisiana Charter Member
http://www.louisianaclassictruckclub.com
HuggerCST is offline   Reply With Quote
Old 06-11-2008, 11:49 PM   #3
HuggerCST
Registered User
 
HuggerCST's Avatar
 
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,500
Re: HuggerCST's '70 SWB CST build

It has sat in the garage most of these years while I collected parts. I work on it when I get time. I have collected and added original style bucket seats, console, tilt, am/fm, speedwarning, cruise, tach, wood bed floor, and 95% of all the new parts that I need to finish it. Last year I had the bed, fenders, tailgate, and hood soda blasted and got it all in primer. I got a crazy idea to put the fuel tank in the rear and hide the fuel filler behind the tail light. Once I finished that, I assembled the bed and parked it again. I plan to go with 6 lug rallies for now, but will probably change everything to 5 lug with disc brakes when I can afford some wheels. Over the years, I seem to be changing from factory original to mild custom with it.
Attached Images
   
__________________
Wynne
70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, cruise, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, posi, shoulder belts, 2.5"/4" drop, 17" Torq thrust 2s.
Build thread
53 Chevy shortbed
69 Camaro

Click here to subscribe
Chevy GMC International Truck Club Louisiana Charter Member
http://www.louisianaclassictruckclub.com
HuggerCST is offline   Reply With Quote
Old 06-11-2008, 11:51 PM   #4
Bob 68327
72 Chevelle Club
 
Bob 68327's Avatar
 
Join Date: Jun 2007
Location: Newton , Iowa
Posts: 2,054
Re: HuggerCST's '70 SWB CST build

Looks great !!
__________________
I Have The Right To Remain Silent,But Lack The Ability


1972 Chevelle ... Mine

2006 Trailblazer... Hers

2002 Buick century ... Kids

2002 K1500 Z-71 EXT CAB ... Daily Driver

2005 Rockwood Roo ... For Camping

1974 Harley-Davidson XLH Sportster 84'' stroker
Bob 68327 is offline   Reply With Quote
Old 06-11-2008, 11:51 PM   #5
67_C-30
I have a radical idea!
 
67_C-30's Avatar
 
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,211
Re: HuggerCST's '70 SWB CST build

FINALLY!! I get to see pics of the of the HuggerCST! (I PM'd you about pics of it a while back and you never responded... hurt my feelings a little, but I'm OK! -j/k) I can't wait to see it finished. That is probably my favorite color combo on these trucks, at least on 69-72's, IMO.

Here's some inspiration for ya if you haven't seen it already!

http://67-72chevytrucks.com/vboard/s...d.php?t=266393
__________________
'68 C-10 Custom SWB, 89,000 mile survivor
'69 C-30 Car Hauler (Ramp Truck) 383, SM465
'67 C-30 Dually Project 6.2 Turbo Diesel, NP435
'84 M1009 CUCV Military Blazer

Non truck project:
1967 Pontiac GTO - 400 H.O., 4 Speed, 3.55 posi, A/C, tinted glass, power antenna. Factory black car with red interior and ultra rare red inner liners.

67 C-30 Turbodiesel build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=254096

My trucks
http://s226.photobucket.com/albums/d...ediafilter=all

Member of the 1-Ton Club!
67_C-30 is offline   Reply With Quote
Old 06-11-2008, 11:53 PM   #6
67_C-30
I have a radical idea!
 
67_C-30's Avatar
 
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,211
Re: HuggerCST's '70 SWB CST build

Wow! That gas filler is slick!
__________________
'68 C-10 Custom SWB, 89,000 mile survivor
'69 C-30 Car Hauler (Ramp Truck) 383, SM465
'67 C-30 Dually Project 6.2 Turbo Diesel, NP435
'84 M1009 CUCV Military Blazer

Non truck project:
1967 Pontiac GTO - 400 H.O., 4 Speed, 3.55 posi, A/C, tinted glass, power antenna. Factory black car with red interior and ultra rare red inner liners.

67 C-30 Turbodiesel build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=254096

My trucks
http://s226.photobucket.com/albums/d...ediafilter=all

Member of the 1-Ton Club!
67_C-30 is offline   Reply With Quote
Old 06-11-2008, 11:57 PM   #7
HuggerCST
Registered User
 
HuggerCST's Avatar
 
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,500
Re: HuggerCST's '70 SWB CST build

A few more recent pics. (December '07)
Attached Images
     
__________________
Wynne
70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, cruise, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, posi, shoulder belts, 2.5"/4" drop, 17" Torq thrust 2s.
Build thread
53 Chevy shortbed
69 Camaro

Click here to subscribe
Chevy GMC International Truck Club Louisiana Charter Member
http://www.louisianaclassictruckclub.com
HuggerCST is offline   Reply With Quote
Old 06-12-2008, 12:04 AM   #8
HuggerCST
Registered User
 
HuggerCST's Avatar
 
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,500
Re: HuggerCST's '70 SWB CST build

Quote:
Originally Posted by 67_C-30 View Post
FINALLY!! I get to see pics of the of the HuggerCST! (I PM'd you about pics of it a while back and you never responded... hurt my feelings a little, but I'm OK! -j/k) I can't wait to see it finished. That is probably my favorite color combo on these trucks, at least on 69-72's, IMO.

Here's some inspiration for ya if you haven't seen it already!

http://67-72chevytrucks.com/vboard/s...d.php?t=266393
Sorry 67_C-30! I do remember you PMing me now, and I thought that I had responded, but I probably forgot to. That really IS a inspirational thread! Thanks!
Here are the last ones for now. I'm working on the body now, so hopefully I'll get some more paint on this thing soon. Thanks for the comments!
Attached Images
    
__________________
Wynne
70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, cruise, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, posi, shoulder belts, 2.5"/4" drop, 17" Torq thrust 2s.
Build thread
53 Chevy shortbed
69 Camaro

Click here to subscribe
Chevy GMC International Truck Club Louisiana Charter Member
http://www.louisianaclassictruckclub.com

Last edited by HuggerCST; 06-12-2008 at 12:06 AM.
HuggerCST is offline   Reply With Quote
Old 06-12-2008, 06:56 AM   #9
67_C-30
I have a radical idea!
 
67_C-30's Avatar
 
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,211
Re: HuggerCST's '70 SWB CST build

Quote:
Originally Posted by HuggerCST View Post
Sorry 67_C-30! I do remember you PMing me now, and I thought that I had responded, but I probably forgot to. That really IS a inspirational thread! Thanks!
Here are the last ones for now. I'm working on the body now, so hopefully I'll get some more paint on this thing soon. Thanks for the comments!
No problem, I was just messin with ya. I added a few more pics to the hugger/white thread for you to enjoy. What wheels do you plan on getting later on?
__________________
'68 C-10 Custom SWB, 89,000 mile survivor
'69 C-30 Car Hauler (Ramp Truck) 383, SM465
'67 C-30 Dually Project 6.2 Turbo Diesel, NP435
'84 M1009 CUCV Military Blazer

Non truck project:
1967 Pontiac GTO - 400 H.O., 4 Speed, 3.55 posi, A/C, tinted glass, power antenna. Factory black car with red interior and ultra rare red inner liners.

67 C-30 Turbodiesel build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=254096

My trucks
http://s226.photobucket.com/albums/d...ediafilter=all

Member of the 1-Ton Club!
67_C-30 is offline   Reply With Quote
Old 06-12-2008, 07:21 AM   #10
GSFMECH
On the road
 
GSFMECH's Avatar
 
Join Date: Jan 2004
Location: NATCHITOCHES LOUISIANA
Posts: 553
Re: HuggerCST's '70 SWB CST build

Wynne,

It's good to see you have a build thread started on that thing. I hope you make some good progress this summer.
__________________
Mike

72 SWB.Med blue. 496/400 turbo,tach, tilt, Speed warning, Stock AC, PS,PDB, factory buckets,console, ECE 4/6 drop w/ 2" blocks and C-notch, 18/20"Coys

My build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=271489
www.louisianaclassictruckclub.com

Last edited by GSFMECH; 06-12-2008 at 12:06 PM. Reason: spelling
GSFMECH is offline   Reply With Quote
Old 06-12-2008, 08:47 AM   #11
nightmare
Senior Member
 
nightmare's Avatar
 
Join Date: May 2002
Location: houston, tx
Posts: 1,659
Re: HuggerCST's '70 SWB CST build

looks good wynne. can't wait to see it finished. definitely going to watch this one.
__________________
Mike

2001 Dakota R/T - Silver CC - 1 of 1671 •360 w/46RE •392 limited slip
1969 Chevy C/10 - Blue LWB •350 w/ 700R4 •3.73 posi •PS PB A/C - SOLD

Using your turn signal is not "giving information to the enemy"

67-72 FAQ

Quote:
Originally Posted by GMCMAX View Post
My lugnuts require more torque than your honda makes!
nightmare is offline   Reply With Quote
Old 06-12-2008, 09:51 AM   #12
HuggerCST
Registered User
 
HuggerCST's Avatar
 
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,500
Re: HuggerCST's '70 SWB CST build

Quote:
Originally Posted by 67_C-30 View Post
No problem, I was just messin with ya. I added a few more pics to the hugger/white thread for you to enjoy. What wheels do you plan on getting later on?
I'm split between Torque thrust 2s(pic #2) and Crager 390's(or Halibrand sprints)(pic #3), but they will be 17"s. My 3rd choice is chrome rallys. When I change wheels I'll lower it 2/4, or maybe 3/5. This is a pick of BraveDave's truck, close to what I'm shooting for.
Attached Images
   
__________________
Wynne
70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, cruise, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, posi, shoulder belts, 2.5"/4" drop, 17" Torq thrust 2s.
Build thread
53 Chevy shortbed
69 Camaro

Click here to subscribe
Chevy GMC International Truck Club Louisiana Charter Member
http://www.louisianaclassictruckclub.com

Last edited by HuggerCST; 06-12-2008 at 09:57 AM.
HuggerCST is offline   Reply With Quote
Old 06-12-2008, 09:56 AM   #13
HuggerCST
Registered User
 
HuggerCST's Avatar
 
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,500
Re: HuggerCST's '70 SWB CST build

Quote:
Originally Posted by GSFMECH View Post
Wynne,

It's good to see you have a build thread started on that thing. I hope you make some good pregress this summer.
Thanks Mike, I'm back working on it again, blocking & sanding. I'm planning to test fit the front end soon & I'll post some pics when I do. I'm trying to keep up with you!
__________________
Wynne
70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, cruise, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, posi, shoulder belts, 2.5"/4" drop, 17" Torq thrust 2s.
Build thread
53 Chevy shortbed
69 Camaro

Click here to subscribe
Chevy GMC International Truck Club Louisiana Charter Member
http://www.louisianaclassictruckclub.com
HuggerCST is offline   Reply With Quote
Old 06-12-2008, 03:05 PM   #14
72BlckButy
Tot Roddin'
 
72BlckButy's Avatar
 
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,551
Re: HuggerCST's '70 SWB CST build

That thing is going to be one slick ride when it's finished. I love the gas filler mod, very clean.

Nice work, you have one beautiful truck!
__________________
-Nate

1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6)
1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior)
2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)
72BlckButy is offline   Reply With Quote
Old 06-12-2008, 06:32 PM   #15
67_C-30
I have a radical idea!
 
67_C-30's Avatar
 
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,211
Re: HuggerCST's '70 SWB CST build

Quote:
Originally Posted by HuggerCST View Post
I'm split between Torque thrust 2s(pic #2) and Crager 390's(or Halibrand sprints)(pic #3), but they will be 17"s. My 3rd choice is chrome rallys. When I change wheels I'll lower it 2/4, or maybe 3/5. This is a pick of BraveDave's truck, close to what I'm shooting for.
It will look really great with either. It sounds very similiar to drop the and wheels sizes I'm planing with mine. I'm wanting to go with 17 X 8 and 17 X 9.5 grey center Torq Thrusts or possibly even Coys C55's. I haven't seen one of these trucks with the C55's yet. They are very nice IMO. Seeing your's is making me want to start tearing mine down, but I'm TRYING to save and have all the money (plus some!) in hand because I'm so afraid I'll tear it down, and it will end up being a long term project. I know me too well!!!

Coys C55

__________________
'68 C-10 Custom SWB, 89,000 mile survivor
'69 C-30 Car Hauler (Ramp Truck) 383, SM465
'67 C-30 Dually Project 6.2 Turbo Diesel, NP435
'84 M1009 CUCV Military Blazer

Non truck project:
1967 Pontiac GTO - 400 H.O., 4 Speed, 3.55 posi, A/C, tinted glass, power antenna. Factory black car with red interior and ultra rare red inner liners.

67 C-30 Turbodiesel build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=254096

My trucks
http://s226.photobucket.com/albums/d...ediafilter=all

Member of the 1-Ton Club!

Last edited by 67_C-30; 06-14-2008 at 10:16 PM.
67_C-30 is offline   Reply With Quote
Old 06-12-2008, 06:48 PM   #16
HuggerCST
Registered User
 
HuggerCST's Avatar
 
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,500
Re: HuggerCST's '70 SWB CST build

That C55 is a great looking wheel, and I really like the grey centers on solid colored trucks, but for this one, it's got to be shiney!
I KNOW what you mean about tearing one down before you're ready!
__________________
Wynne
70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, cruise, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, posi, shoulder belts, 2.5"/4" drop, 17" Torq thrust 2s.
Build thread
53 Chevy shortbed
69 Camaro

Click here to subscribe
Chevy GMC International Truck Club Louisiana Charter Member
http://www.louisianaclassictruckclub.com

Last edited by HuggerCST; 06-12-2008 at 06:49 PM.
HuggerCST is offline   Reply With Quote
Old 06-13-2008, 11:51 AM   #17
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 16,479
Re: HuggerCST's '70 SWB CST build

I've been wondering when you were finally going to start a build thread, . The truck looks great, post more pictures, .
__________________
Rob - http://instagram.com/hart_rod
As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17

FOR SALE: DBW pedal bracket, Pedal adapter for LS trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=651123
FOR SALE: ChubTubz, Rear tubs for slammed trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=675754
FOR SALE: Hood Brackets, Bolt in hood brackets! http://67-72chevytrucks.com/vboard/s...d.php?t=679945


1969 SuperBurb - 5.3/Magnacharger..http://67-72chevytrucks.com/vboard/s...d.php?t=200387
1968 Farm truck: LS3/6L80/TVS1900: http://67-72chevytrucks.com/vboard/s...d.php?t=358692
1968 SWB - SHIFTED: PB Xtreme DM/LS1/Dakota Digital/AccuAir/Vintage Air/...http://67-72chevytrucks.com/vboard/s...d.php?t=551258
1948 5 Window Chevy http://67-72chevytrucks.com/vboard/s...=122164&page=3
FAQ: http://67-72chevytrucks.com/vboard/f...play.php?f=220
Hart_Rod is offline   Reply With Quote
Old 06-13-2008, 04:26 PM   #18
BACKYARD88
On the fast track to nowhere..
 
BACKYARD88's Avatar
 
Join Date: May 2006
Location: Splendora, Texas
Posts: 5,321
Re: HuggerCST's '70 SWB CST build

I was wondering when I'd see this thread Looks good Sir!
__________________
-Mike Owen-

Norwood, Houston, Cecilia, Jackson, Monroe and counting
BACKYARD88 is offline   Reply With Quote
Old 06-13-2008, 04:56 PM   #19
HuggerCST
Registered User
 
HuggerCST's Avatar
 
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,500
Re: HuggerCST's '70 SWB CST build

Yeah I've been putting it off because #1- I don't have alot of pictures; #2 Lazyness; and #3 I didn't want my truck to end up catching the Killer71 disease.
__________________
Wynne
70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, cruise, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, posi, shoulder belts, 2.5"/4" drop, 17" Torq thrust 2s.
Build thread
53 Chevy shortbed
69 Camaro

Click here to subscribe
Chevy GMC International Truck Club Louisiana Charter Member
http://www.louisianaclassictruckclub.com
HuggerCST is offline   Reply With Quote
Old 06-15-2008, 11:09 PM   #20
HuggerCST
Registered User
 
HuggerCST's Avatar
 
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,500
Re: HuggerCST's '70 SWB CST build

Weekend progress- Nothing exciting, but I'm glad to be making progress. I have a aftermarket RF fender, and the wheel opening lip was wavey,(like most aftermarkets seem to be), so I decided to straighten it out. I got it done, but want to block & reprime it one more time. I got the LF fender primed and ready, I welded up the bowtie holes in the hood and got it primed, but I think I'll block & prime it one more time also; and I got the gate done except for the trim holes. Anyone know if my truck should have the lower trim on the gate? Just curious, I've got a new one, so I might as well use it. I've seen it on a few trucks, I just didn't know what year/trim level etc. got that piece of trim.
Attached Images
    
__________________
Wynne
70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, cruise, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, posi, shoulder belts, 2.5"/4" drop, 17" Torq thrust 2s.
Build thread
53 Chevy shortbed
69 Camaro

Click here to subscribe
Chevy GMC International Truck Club Louisiana Charter Member
http://www.louisianaclassictruckclub.com

Last edited by HuggerCST; 06-15-2008 at 11:21 PM.
HuggerCST is offline   Reply With Quote
Old 06-15-2008, 11:11 PM   #21
HuggerCST
Registered User
 
HuggerCST's Avatar
 
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,500
Re: HuggerCST's '70 SWB CST build

Gate & new trim.
Attached Images
   
__________________
Wynne
70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, cruise, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, posi, shoulder belts, 2.5"/4" drop, 17" Torq thrust 2s.
Build thread
53 Chevy shortbed
69 Camaro

Click here to subscribe
Chevy GMC International Truck Club Louisiana Charter Member
http://www.louisianaclassictruckclub.com
HuggerCST is offline   Reply With Quote
Old 06-15-2008, 11:40 PM   #22
killer71
Registered User
 
killer71's Avatar
 
Join Date: May 2006
Location: at work
Posts: 2,522
Re: HuggerCST's '70 SWB CST build

wynne are you doing the paint?
__________________
R.I.P.
Killer 71
10/26/07
killer71 is offline   Reply With Quote
Old 06-15-2008, 11:43 PM   #23
HuggerCST
Registered User
 
HuggerCST's Avatar
 
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,500
Re: HuggerCST's '70 SWB CST build

Quote:
Originally Posted by killer71 View Post
wynne are you doing the paint?
Yes. I do it as a hobby and for side money, which is why this build is taking so long.
__________________
Wynne
70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, cruise, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, posi, shoulder belts, 2.5"/4" drop, 17" Torq thrust 2s.
Build thread
53 Chevy shortbed
69 Camaro

Click here to subscribe
Chevy GMC International Truck Club Louisiana Charter Member
http://www.louisianaclassictruckclub.com
HuggerCST is offline   Reply With Quote
Old 06-15-2008, 11:44 PM   #24
killer71
Registered User
 
killer71's Avatar
 
Join Date: May 2006
Location: at work
Posts: 2,522
Re: HuggerCST's '70 SWB CST build

Are you capable of show quality? no disrespect intended
__________________
R.I.P.
Killer 71
10/26/07
killer71 is offline   Reply With Quote
Old 06-15-2008, 11:56 PM   #25
HuggerCST
Registered User
 
HuggerCST's Avatar
 
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,500
Re: HuggerCST's '70 SWB CST build

Quote:
Originally Posted by killer71 View Post
Are you capable of show quality? no disrespect intended
This one will be, but I don't have a booth.(yet) I'll be borrowing one for the final paint on this job. I do respectable work, but I don't do it enough to be as good as the pros, or have the best equipment, so the pros can usually find my mistakes. This one is easy because it's not a metallic.
__________________
Wynne
70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, cruise, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, posi, shoulder belts, 2.5"/4" drop, 17" Torq thrust 2s.
Build thread
53 Chevy shortbed
69 Camaro

Click here to subscribe
Chevy GMC International Truck Club Louisiana Charter Member
http://www.louisianaclassictruckclub.com

Last edited by HuggerCST; 06-15-2008 at 11:58 PM.
HuggerCST is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:58 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com