The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Info Center > Welcome Area

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-12-2008, 03:26 PM   #1
BarelyLegalFab
Registered User
 
Join Date: Aug 2008
Location: Kawkawlin Michigan
Posts: 22
Barely Legal Welding and Fabrication

Hey every one, my name is Richie from Barely Legal Welding and Fabrication. We are looking to advertise on a few more forums and i ran across this one, hoping to help some of you guys out with parts. I just need to know who i need to contact about advertising here, because we have products(Control arms, link kits ect...) for 1960-1987 c-10, c-20 and c30 trucks and suburbans. So eather point me in the right direction or pm me the pricing.

Thanks and we hope to be some help to some of you.

Richie
BarelyLegalFab is offline   Reply With Quote
Old 08-12-2008, 04:08 PM   #2
too much stuff
Senior Member
 
too much stuff's Avatar
 
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 9,189
Re: Barely Legal Welding and Fabrication

Welcome from mn. Contact josh, or liz and i am sure they can set you up. (that is their board names). Eric
__________________
67 swb CST
68 gmc lwb
69 swb 4x4 project
70 4x4/BB/bkts/posi/tach
70 swb (wifes)
70 blazer 4x4
71 blazer 2x4
71 cheyenne 4x4/tach/posi/ plow rig
72 cheyenne30 motor home
65 fury conv. 383/auto
65 chrysler 300 "L" 413 auto
too much stuff is offline   Reply With Quote
Old 08-12-2008, 04:28 PM   #3
jsbgump
Gone Fishing
 
jsbgump's Avatar
 
Join Date: Aug 2005
Location: Fort Worth, Texas 76108
Posts: 12,344
Re: Barely Legal Welding and Fabrication

Welcome to the board from Texas
__________________
68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started
2006 GMC Sierra 1/2 ton Crew Cab SLE2 (DD)
2014 GMC Acadia Denali (Wifes Ride)

Build Thread

http://67-72chevytrucks.com/vboard/s...=1#post3483616
jsbgump is offline   Reply With Quote
Old 08-12-2008, 04:36 PM   #4
DREAMS OF A 67
Step Brother

 
DREAMS OF A 67's Avatar
 
Join Date: Sep 2007
Location: knoxville TN
Posts: 1,951
Smile Re: Barely Legal Welding and Fabrication

FROM KNOXVILLE TN!!!
__________________
Joe
DREAMS OF A 67 is offline   Reply With Quote
Old 08-12-2008, 06:37 PM   #5
Cyclone44
Step Brother
 
Cyclone44's Avatar
 
Join Date: Sep 2007
Location: K-town
Posts: 4,031
Re: Barely Legal Welding and Fabrication

from Knoxville Tn....
Cyclone44 is offline   Reply With Quote
Old 08-12-2008, 11:48 PM   #6
shaneschevys
Its always something!
 
shaneschevys's Avatar
 
Join Date: Aug 2005
Location: FT Worth,TX
Posts: 4,985
Re: Barely Legal Welding and Fabrication

Welcome from FT Worth TX.
__________________
72 Short Fleetside
72 Suburban
69 panel
67 GMC One Ton Flatbed
64 Short Fleetside
57 Chevy 2DR Hard Top
57 Chevy 2dr wagon
65 f*** short fleet
63 C 60 Flatbed




Member of the patina club
shaneschevys is offline   Reply With Quote
Old 08-13-2008, 12:24 AM   #7
Jerry Jones
Happy Camper
 
Jerry Jones's Avatar
 
Join Date: Feb 2006
Location: Northern California
Posts: 8,403
Re: Barely Legal Welding and Fabrication

Welcome aboard from Northern California!
__________________
'68 C10 LWB 350/4speed workhorse.
'69 C20
'72 3/4 Ton Big Block GMC (El Jay's ride)
'85 GMC 1/2 ton Long Bed 4X4
'10 Chevy Aveo
'08 Chevy Suburban 5.3
'12 Chevy Cruze LTZ RS
'83 22' Omega Jet 454
'63 17.5' Stevens Flatbottom 396

RIP El Jay! Love you brother!

Click here to subscribe!http://67-72chevytrucks.com/vboard/payments.php

SquareBody
Jerry Jones is offline   Reply With Quote
Old 08-13-2008, 06:22 AM   #8
Old Chevy Mech
Keepin it runnin!
 
Old Chevy Mech's Avatar
 
Join Date: Oct 2007
Location: Deep River, CT
Posts: 1,035
Re: Barely Legal Welding and Fabrication

from CT!

Frank
__________________
1970 K-5 4X4 Blazer
1970 K-20 4X4 Long Bed

"Liberty Means Responsibility, that is why most men dread it"
Old Chevy Mech is offline   Reply With Quote
Old 08-13-2008, 08:35 AM   #9
BarelyLegalFab
Registered User
 
Join Date: Aug 2008
Location: Kawkawlin Michigan
Posts: 22
Re: Barely Legal Welding and Fabrication

thanks every one for the welcome. here is a pic of my 1990 square body 1 ton.







Last edited by BarelyLegalFab; 08-13-2008 at 08:36 AM.
BarelyLegalFab is offline   Reply With Quote
Old 08-13-2008, 09:09 AM   #10
bdydrp97s10
Registered User
 
bdydrp97s10's Avatar
 
Join Date: Dec 2007
Location: Johnson City TN
Posts: 565
Re: Barely Legal Welding and Fabrication

Welcome... glad to see somebody else cross over from streetsource too.. good work as always
__________________
My build thread--http://67-72chevytrucks.com/vboard/s...d.php?t=300333
bdydrp97s10 is offline   Reply With Quote
Old 08-13-2008, 10:14 AM   #11
BarelyLegalFab
Registered User
 
Join Date: Aug 2008
Location: Kawkawlin Michigan
Posts: 22
Re: Barely Legal Welding and Fabrication

Quote:
Originally Posted by bdydrp97s10 View Post
Welcome... glad to see somebody else cross over from streetsource too.. good work as always
thanks man.

Richie
BarelyLegalFab is offline   Reply With Quote
Old 08-13-2008, 01:32 PM   #12
72BlckButy
Tot Roddin'
 
72BlckButy's Avatar
 
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,529
Re: Barely Legal Welding and Fabrication

to the board from Mid-MO!!!
__________________
-Nate

1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6)
1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior)
2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)
72BlckButy is offline   Reply With Quote
Old 08-13-2008, 01:59 PM   #13
royo
vroom vroom
 
royo's Avatar
 
Join Date: Feb 2007
Location: knoxville tn
Posts: 1,010
Re: Barely Legal Welding and Fabrication

Quote:
Originally Posted by BarelyLegalFab View Post
thanks every one for the welcome. here is a pic of my 1990 square body 1 ton.






welcome from knoxville tenn
did the tierod work on that. Are those special balljoints and a frames that thing is on the ground
__________________
nickle and dime
royo is offline   Reply With Quote
Old 08-13-2008, 02:12 PM   #14
BACKYARD88
On the fast track to nowhere..
 
BACKYARD88's Avatar
 
Join Date: May 2006
Location: Splendora, Texas
Posts: 5,321
Re: Barely Legal Welding and Fabrication

from South Texas!
__________________
-Mike Owen-

Norwood, Houston, Cecilia, Jackson, Monroe and counting
BACKYARD88 is offline   Reply With Quote
Old 08-13-2008, 02:38 PM   #15
BarelyLegalFab
Registered User
 
Join Date: Aug 2008
Location: Kawkawlin Michigan
Posts: 22
Re: Barely Legal Welding and Fabrication

Quote:
Originally Posted by royo View Post
welcome from knoxville tenn
did the tierod work on that. Are those special balljoints and a frames that thing is on the ground

yes it lays the frame, the A-Arms our our own brand and the upper arms use our Unijoints insted of ball joints. We fliped the tie rods to the under side, just untill i get a chance to make No Notch Tierods for it.


Richie
BarelyLegalFab is offline   Reply With Quote
Old 08-13-2008, 02:44 PM   #16
jkaylor68gmc
Senior Member
 
jkaylor68gmc's Avatar
 
Join Date: Dec 2005
Location: TN
Posts: 2,437
Re: Barely Legal Welding and Fabrication

Awesome and welcome to the board from TRUCK BUILDER magazine!
__________________
www.classicbrakecomponents.com -- under construction

1947 International KB-1
1957 Chevy Bel-Air riding low
1962 swb fleetside
2002 Chevrolet Silverado 7-inch lift on 35 Daily driver
2005 Mercedes C-class Kompressor Better halves ride
jkaylor68gmc is offline   Reply With Quote
Old 08-13-2008, 03:45 PM   #17
BarelyLegalFab
Registered User
 
Join Date: Aug 2008
Location: Kawkawlin Michigan
Posts: 22
Re: Barely Legal Welding and Fabrication

thanks again to all the new welcomes, seems to be a pretty cool site.


Richie
BarelyLegalFab is offline   Reply With Quote
Old 08-13-2008, 09:04 PM   #18
scotts62
One day...
 
scotts62's Avatar
 
Join Date: Apr 2008
Location: Oklahoma City, Ok
Posts: 9,273
Re: Barely Legal Welding and Fabrication

from OKC! Very cool ride man, i have always wanted a slammed dually like that
__________________
Scott

93 crew cab build
Project 62
scotts62 is offline   Reply With Quote
Old 08-13-2008, 09:43 PM   #19
joe231
I want a TURBO!!!
 
joe231's Avatar
 
Join Date: Dec 2007
Location: Eagle River, Alaska
Posts: 13,871
Re: Barely Legal Welding and Fabrication

welcome!!! cool rig, you tow with it?

at the top left of the page click on "user cp"
scroll down the page. left side click on "paid subscriptions"
there you can pay for a "vendors subscription"
__________________
CHEVY ONLY

Alaskan Members check-in

Un-Named 4x4 CCLB W/6.2L DIESEL

zack231's 4x4 CCSB W/6.2L DIESEL

Oil Burner for LIFE!!
Nothin' but LOVE for the Detroit Diesels!!

"HOW TO" upload pics from your computer
joe231 is offline   Reply With Quote
Old 08-14-2008, 04:24 AM   #20
BarelyLegalFab
Registered User
 
Join Date: Aug 2008
Location: Kawkawlin Michigan
Posts: 22
Re: Barely Legal Welding and Fabrication

Quote:
Originally Posted by scotts62 View Post
from OKC! Very cool ride man, i have always wanted a slammed dually like that
thanks, same here i got a great deal on the truck, and we build air suspension parts here so i figured might as well design Control arms up front a link kit out back.

Richie
BarelyLegalFab is offline   Reply With Quote
Old 08-14-2008, 04:33 AM   #21
BarelyLegalFab
Registered User
 
Join Date: Aug 2008
Location: Kawkawlin Michigan
Posts: 22
Re: Barely Legal Welding and Fabrication

Quote:
Originally Posted by joe231 View Post
welcome!!! cool rig, you tow with it?

at the top left of the page click on "user cp"
scroll down the page. left side click on "paid subscriptions"
there you can pay for a "vendors subscription"

ya i tow our trailer we take to shows(stores all our products we display). THe rear bags them selves will lift 6000lbs a peice giving me the ability to have up to a 12,000 lb tongue weight lol(which in no way i recomend doing , this just gives you an idea on the towing capicty it has) , i can pretty much hook on to anything the motor and tranny will pull down the road. I needed a tow vechile and was not giving the dealer ship $40,000.00 for some new plastic truck. So i keep my eye out for a square body and one day i saw the truck, guy owned it in tennesse(almost perfect body low mile motor, junk interior) and got the truck for $2,800.00. Then we brought it in the shop designed some parts off it and baged it, and put 19.5"rims w/225-70-19.5 tires. We where going to do semi's but after we bought a wheel milled it down from 22.5" to 22" we had hardly and rim bead left and i wasnt riding my wife and kids in someing that wasnt safe, so i opted for the 19.5". which is nice i can drive over any thing i did before so stopping for train tracks or not having to worrie about hitting a pot hole. lol

Richie
BarelyLegalFab is offline   Reply With Quote
Old 08-14-2008, 10:06 AM   #22
N2TRUX
Happy to be here

 
N2TRUX's Avatar
 
Join Date: Mar 2000
Location: Cypress, TX
Posts: 36,433
Re: Barely Legal Welding and Fabrication

Welcome to the forum BarelyLegalFab. Glad to see another square body fan on the site. Please come visit us in the suspension forum. You will find a lot of the industry pro's hang out there. Your input would be greatly appreciated.
N2TRUX is offline   Reply With Quote
Old 08-14-2008, 11:38 AM   #23
YOLO
Custom Truck Lover!
 
YOLO's Avatar
 
Join Date: Nov 2007
Location: Phoenix, AZ
Posts: 240
Re: Barely Legal Welding and Fabrication

nice work and cool truck. I am another crossover from Streetsource. This site has level headed and knowledgeable people. WELCOME!!!!
__________________
signature changed due to my inability to follow site guidelines and continued effort in circumventing site rules.
YOLO is offline   Reply With Quote
Old 08-14-2008, 07:02 PM   #24
GREASEMONKEY72
Registered User
 
GREASEMONKEY72's Avatar
 
Join Date: Aug 2006
Location: Bakersfield,CA
Posts: 7,886
Re: Barely Legal Welding and Fabrication

welcome to the board

love those layed out duallies, ive always wanted one myself

i plan on layin frame with my truck eventually
__________________
-steven
Alte Seele S.S.

"Allison" '72 C/10 LWB 350SB/TH350 - DD

PITBULL IS NOT A CRIME
GREASEMONKEY72 is offline   Reply With Quote
Old 08-14-2008, 07:25 PM   #25
BarelyLegalFab
Registered User
 
Join Date: Aug 2008
Location: Kawkawlin Michigan
Posts: 22
Re: Barely Legal Welding and Fabrication

Quote:
Originally Posted by N2TRUX View Post
Welcome to the forum BarelyLegalFab. Glad to see another square body fan on the site. Please come visit us in the suspension forum. You will find a lot of the industry pro's hang out there. Your input would be greatly appreciated.

will do , looking forward to helping out on this site and it will be nice to chat with other people like my self.

Richei
BarelyLegalFab is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:59 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com