post your 67-72 4x4

[yfs200p]

Originally Posted by PortalAxls

Anybody know the color codes for this truck? Picking up a 67 GMC 3/4 ton and think this is a great color combination!! Thanks in advance to those who may hold the answer

I think its called Ochre. That would probably be listed as White/Ochre/White/Ochre. Ochre is #511

[Neitzertjohn]

Ok here it is guys , if i do it right

[/IMG]

This will be a work over a long period of time but it will be a full frame off, and it will be a daily driver after its done.

[Neitzertjohn]

well it didn't work ,crap

[Neitzertjohn]

Ok looks like i got it this time !! Well it's rough but that will change .




maybe i got it this time

[mud.man.rj]

Rsmarr1982, cool looking Sub , green and all in the back ground, did you bring it home too, hope so.

[1985-GMC]

Originally Posted by rsmarr1982

got off a farm in smithville ohio this past summer

Bad azz truck man! You should add it to these two threads:

http://67-72chevytrucks.com/vboard/s...d.php?t=306565

http://67-72chevytrucks.com/vboard/s...d.php?t=320260

Is that a Napco burb it the last pic?

[rsmarr1982]

Originally Posted by mud.man.rj

Rsmarr1982, cool looking Sub , green and all in the back ground, did you bring it home too, hope so.

no i wish thats a friend of mines. has a fuel injected 454 in it. its about to get tore appart to get restored.

[HeavyC]

Here's my '83 K10 shortbox 4x4 I picked up a couple of weeks ago. It's got a 350/700R4, color matched ralleys, warn lock outs, wrapped in 31.5 BFG's with a slight lift. I got it for a hunting rig, but been driving it everyday since I bought it. It rides like a dang truck, but hey, it's not my accord either! The Honda is sitting in the garage while I'm riding high in my K10 during these North Dakota winters! It's yellow, has some rust but the body is pretty straight for a 30 year old truck. It's not perfect I don't care, it's a tank and it's unique where I live!

In the last week I did the following:

New valve cover rubber gaskets, new transmission filter kit, new tranny fluid, new plugs, new vacuum advance, tightened distributor cap (it was hand loose), adjusted carb, fixed timing, had shop install new 2 1/2 dual exhaust with magnaflow glasspacks and 4" stainless steal tips, new manifold gaskets and donuts, took off running boards and clear old school square style bug shield....

In the near future I plan on...

Purchasing a bull bar with KC lights, taking off Leer Mach topper (I'm going to try and sell it) and installing triple chrome roll bars with KC lights, chrome step up bars, chrome grab bars, tinting windows, chrome fender flares, chrome rocker panels, mud flaps, smoked head light covers, smoked vent window shades, smoked bug shield, any one have these parts for sale???

Should I replaced the factory painted rallys for some other rims? I would need some 15" to fit my new BFG KO's.

Thanks for looking.

[Neitzertjohn]

Originally Posted by mud.man.rj

Rsmarr1982, cool looking Sub , green and all in the back ground, did you bring it home too, hope so.

yes it is home now . I will be looking into tearing some of it down today .

[rpatowers]

Here's mine. It's a 72 Stepside 4 x 4 that I bought new in 1972. It has a 4" lift. I restored it some time back and it has a new crate engine and the transmission and transfer case have been rebuilt.

Will never sell! I will be buried in my truck!

[50bomb]

You 67-72 chevy/gmc 4x4 guys are definately cool!!!

[FetchMeAPepsi]

Originally Posted by 50bomb

You 67-72 chevy/gmc 4x4 guys are definately cool!!!

Not as cool as the 60-66 crew, but you guys run a tight second

/flee!

[50bomb]

Originally Posted by FetchMeAPepsi

Not as cool as the 60-66 crew, but you guys run a tight second

/flee!

I can't lie 60-66 are my all time favorite trucks. I use to have a 64 chevy fleetside shorty. That was the truck that started my sickness for 1972 and older chev/gmc pickups! I even got ink of the 64 on my shoulder.

[mud.man.rj]

My sickness is 67-72 GM/Chevy's can't seem to help myself, I have had 5 two wheel drives and 2 4wd's and owned both 4x4's trice each, so Momma said to buy this 71 Big block one back and keep it and buy some other project, so of course I did, I b ought a 64 Fairlane,(for the kid's,hehe), should listen to the wife you know. So keeping this 71 4x4 for good now.

[FetchMeAPepsi]

Here's a 71 for ya with big ol' puppy squashers on 'er. Fueling the passion

[JDeere550]

Originally Posted by TruckGuy5772

What gears you runnin? I have a 4 inch lift with 3 inch body, would that take 40's without cutting you think? I'm still doin body work on mine so I'm just doin R/D and gettin ideas...

eh, it'd be a close call, i think while turning and flex it would rub cause mine still does at times haha.

Originally Posted by fun in dirt

I think perfect sheet metal on a 4x4 that is actually built to be driven is way overrated...low & big tires looks wicked!

youre damn right!

Originally Posted by mud.man.rj

Wow jdeere, I have a 6" lift with 35's and there isn't a lot of room left, you must have done a bit of cutting, all I know is it looks cool. Mylast truck had 38.5's thes 35's are making me itchy for more after seing yours.

lol yeah i cut quite a bit in the front, but i'll post some more pics of what i cut on here sometime soon so you can see. when i get my 8" on there i want to get some 42's for it lol



thanks guys!!

[JDeere550]

Originally Posted by 70 beast

gonna have to get this thing out on the rocks
looks killer...low lift/huge tires...

haha havent seen a long bed out on the rocks much but **** i'd give it a try! :P thanks man!

[mud.man.rj]

Not lettin my puppy out when Fetchmeapepsi is around.

[KyFarm]

Ok, here's my new to me '69. Currently its getting front and rear axles from a '72 which will give it power disc brakes and 3.08 gears (I think). Getting the TH350 and NP205 from the '72, the 3 on the column is getting retired. Getting a tilt steering column from the '72. Already had a 350ci in it. Gonna wait about a year then next years project will be a motor rebuild or crate. Probably gonna put the 33 x 12.5 x 15's from '72 on it as well.

[TruckGuy5772]

Originally Posted by FetchMeAPepsi

Here's a 71 for ya with big ol' puppy squashers on 'er. Fueling the passion

What kind of lift you have on her? gears?

[rpatowers]

FetchMeAPepsi-

That is one beautiful truck you have there! I would be interested in knowing the lift you have on it also. And what size tires are those?

[wrwelton]

Here are the before and during pics. The finish line is coming soon.

[mud.man.rj]

What, where is the nice rubber fender flares, they are probably rare, no just kidding, the paint is sooo nice compared to before, glad the blck stripe is gone. Is it a factory color, had a 3/4 ton 71 orange too not as pretty though.

[1985-GMC]

Nice, you need a build thread wrwelton!

[wrwelton]

Yes this is a factory color. It was my Dads truck and he gave it to me when i was 16. I am now 48. Long time coming. Thanks