The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-09-2009, 06:19 PM   #1
Patsfan34
Restoring a 70 4x4
 
Patsfan34's Avatar
 
Join Date: Dec 2008
Location: New England
Posts: 664
292 Inline 6 cylinder w/Rochester 1 Barrel Carb

292 Engine, originally out of a 68 GMC (at least according to the VIN on the frame). This engine will need to be rebuilt. It DOES NOT run but is complete. I was going to rebuild the engine but the truck I bought to restore came with a 4bolt 350 with 59K original miles so I said forget rebuilding this 292. $250 or B/O. Pick up only!
Attached Images
   

Last edited by Patsfan34; 01-08-2010 at 03:22 PM.
Patsfan34 is offline   Reply With Quote
Old 12-09-2009, 06:23 PM   #2
Patsfan34
Restoring a 70 4x4
 
Patsfan34's Avatar
 
Join Date: Dec 2008
Location: New England
Posts: 664
Re: 292 (6 Cylinder)

The split manifold and exhaust is SOLD!

Last edited by Patsfan34; 12-16-2009 at 12:57 PM.
Patsfan34 is offline   Reply With Quote
Old 12-09-2009, 09:56 PM   #3
Patsfan34
Restoring a 70 4x4
 
Patsfan34's Avatar
 
Join Date: Dec 2008
Location: New England
Posts: 664
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

Word to Swantown!!!
Patsfan34 is offline   Reply With Quote
Old 12-09-2009, 11:25 PM   #4
N2GMTrux
Registered User
 
N2GMTrux's Avatar
 
Join Date: Jan 2007
Location: Fort Worth, TX 76133
Posts: 378
Thumbs up Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

I only wish you were closer to Texas. I would of bought that engine and had it in my garage by know.....

Just to put my self in line.... If you part out the engine! I would buy the motor mount stands and engine motor mounts with all hardware ( screws ) , all complete.

PLEASE P.M. Me if it gets parted out and in case I lose track of this post.
Thanks
S.C.
N2GMTrux is offline   Reply With Quote
Old 12-10-2009, 08:20 AM   #5
70STOVEBOLT
Broke
 
70STOVEBOLT's Avatar
 
Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 2,143
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

I am interested in the spark arrestor and plumbing if you part it. Just le me know if it gets to that point.
Thanks,
Mark
__________________
70 SWB 250 TH400 "The Needy Beast"
200,000 Mile Club
Drum Brake Club
Daily Driver Club
Owner installed options:
Front Sway Bar
Power Steering
Power Brakes
Cigar Lighter
Courtesy Lights
Deluxe Side Markers
Wiper Delay
70STOVEBOLT is offline   Reply With Quote
Old 12-10-2009, 08:44 AM   #6
Patsfan34
Restoring a 70 4x4
 
Patsfan34's Avatar
 
Join Date: Dec 2008
Location: New England
Posts: 664
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

Ok, I'll keep you guys updated.

Last edited by Patsfan34; 12-10-2009 at 01:40 PM.
Patsfan34 is offline   Reply With Quote
Old 12-10-2009, 10:49 AM   #7
capev86
Registered User
 
Join Date: May 2009
Location: Eliot, Maine
Posts: 1,313
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

that would be a torque monster with a good rebuild and the right parts. stacie david covered the good points of the 292 on his show Gearz awhile back. there exists an aftermarket exhaust manifold that fits a small 4 barrel carb. just think what some head work and a good (roller) rv style cam would do in your truck. there is a reason why the trailblazer went with a straight 6 over the v6 in the s10 series trucks......better low end power.
capev86 is offline   Reply With Quote
Old 12-10-2009, 11:39 AM   #8
ScottH
Senior Member
 
ScottH's Avatar
 
Join Date: Sep 2002
Location: Toms River, NJ
Posts: 6,480
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

Interested in the exhaust manifolds depending on shipping costs to 08753, and also balancer if u split up the motor (depending upon condition). BTW any PS parts on that engine?

Thanks.

Scott
__________________
1987 V10 swb fleetside
1972 lwb C10 (for sale)
1966 GMC G1000 Handi-bus (project)
1966 Chevy C10
1955 Chevy sedan delivery
1946 Chevy half ton swb (for sale)
1936 Ford 5 window coupe
ScottH is offline   Reply With Quote
Old 12-10-2009, 01:36 PM   #9
Patsfan34
Restoring a 70 4x4
 
Patsfan34's Avatar
 
Join Date: Dec 2008
Location: New England
Posts: 664
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

Quote:
Originally Posted by capev86 View Post
that would be a torque monster with a good rebuild and the right parts.
That's the exact reason why I bought this chassis in the first place, besides the 4x4 drive train. I knew once rebuilt correctly the 292 would still have plenty of power and be much better on gas then the 4barrel 350 I will use now.
Patsfan34 is offline   Reply With Quote
Old 12-10-2009, 01:40 PM   #10
Patsfan34
Restoring a 70 4x4
 
Patsfan34's Avatar
 
Join Date: Dec 2008
Location: New England
Posts: 664
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

Quote:
Originally Posted by ScottH View Post
Interested in the exhaust manifolds depending on shipping costs to 08753, and also balancer if u split up the motor (depending upon condition). BTW any PS parts on that engine?

Thanks.

Scott
Sorry Scott but the manifolds are pick up only. Too much headache to get them boxed up and worry about shipping. I'm in Brookfield, CT 06804 so that's not as far as you'd think from Jersey. The engine didn't have any power steering or brackets when I bought the chassis.
Patsfan34 is offline   Reply With Quote
Old 12-10-2009, 02:55 PM   #11
ScottH
Senior Member
 
ScottH's Avatar
 
Join Date: Sep 2002
Location: Toms River, NJ
Posts: 6,480
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

Understood, I know how much of a pain shipping can be. If I get up that way I'll let u know.

If u part please keep me in mind for the balancer.

Thanks

Scott
__________________
1987 V10 swb fleetside
1972 lwb C10 (for sale)
1966 GMC G1000 Handi-bus (project)
1966 Chevy C10
1955 Chevy sedan delivery
1946 Chevy half ton swb (for sale)
1936 Ford 5 window coupe
ScottH is offline   Reply With Quote
Old 12-10-2009, 03:29 PM   #12
Patsfan34
Restoring a 70 4x4
 
Patsfan34's Avatar
 
Join Date: Dec 2008
Location: New England
Posts: 664
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

Quote:
Originally Posted by ScottH View Post
Understood, I know how much of a pain shipping can be. If I get up that way I'll let u know.

If u part please keep me in mind for the balancer.

Thanks

Scott
Scott, if you are anywhere near the CT border let me know and I can probably meet you. I drive to the shoreline everyday for work. Do you ever make it up to Westchester County, NY?
Patsfan34 is offline   Reply With Quote
Old 12-12-2009, 02:28 PM   #13
Patsfan34
Restoring a 70 4x4
 
Patsfan34's Avatar
 
Join Date: Dec 2008
Location: New England
Posts: 664
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

^^^
Patsfan34 is offline   Reply With Quote
Old 12-14-2009, 10:03 AM   #14
Patsfan34
Restoring a 70 4x4
 
Patsfan34's Avatar
 
Join Date: Dec 2008
Location: New England
Posts: 664
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

Bump for a new week!
Patsfan34 is offline   Reply With Quote
Old 12-14-2009, 10:42 AM   #15
TwoFiftyShifter
Registered User
 
Join Date: Nov 2008
Location: North GA
Posts: 905
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

Does the split manifold fit a 230/250?
__________________
1984 Chevy K10 305 4 speed
1996 Chevy Silverado Z71 White 5.7 SOLD
1964 GMC SWB SOLD

Last edited by TwoFiftyShifter; 12-14-2009 at 10:43 AM.
TwoFiftyShifter is offline   Reply With Quote
Old 12-14-2009, 11:01 AM   #16
Patsfan34
Restoring a 70 4x4
 
Patsfan34's Avatar
 
Join Date: Dec 2008
Location: New England
Posts: 664
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

Quote:
Originally Posted by TwoFiftyShifter View Post
Does the split manifold fit a 230/250?
I have no idea! If the head is the same then yes it should fit but I don't want to tell you the wrong info.
Patsfan34 is offline   Reply With Quote
Old 12-14-2009, 01:45 PM   #17
N2GMTrux
Registered User
 
N2GMTrux's Avatar
 
Join Date: Jan 2007
Location: Fort Worth, TX 76133
Posts: 378
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

The non-integrated head on a 250 and 292 are the exact same head unit they are interchangeable. The blocks are the only difference in between the two. The A/C's mount the same location but require larger brace from lower mounting due to taller deck on block. Majority of the exterior items are interchangable. The exhaust are interchangeable.

The only items which are different are the internal rotating mechanical items, crank, rods, & the block.
N2GMTrux is offline   Reply With Quote
Old 12-14-2009, 02:16 PM   #18
Patsfan34
Restoring a 70 4x4
 
Patsfan34's Avatar
 
Join Date: Dec 2008
Location: New England
Posts: 664
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

Thanks for the info!
Patsfan34 is offline   Reply With Quote
Old 12-14-2009, 04:55 PM   #19
TwoFiftyShifter
Registered User
 
Join Date: Nov 2008
Location: North GA
Posts: 905
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

Not sure if your saving these for the fella from NJ, but I am interested in them for my '64 GMC with a 230, I hope they will fit with the 3 on the column linkage.... I'm in the Newburgh NY area and travel to CT alot, my girlfriend lives in ridgefield.... Anyway we can meet for these?
__________________
1984 Chevy K10 305 4 speed
1996 Chevy Silverado Z71 White 5.7 SOLD
1964 GMC SWB SOLD
TwoFiftyShifter is offline   Reply With Quote
Old 12-14-2009, 05:00 PM   #20
Patsfan34
Restoring a 70 4x4
 
Patsfan34's Avatar
 
Join Date: Dec 2008
Location: New England
Posts: 664
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

Quote:
Originally Posted by TwoFiftyShifter View Post
Not sure if your saving these for the fella from NJ, but I am interested in them for my '64 GMC with a 230, I hope they will fit with the 3 on the column linkage.... I'm in the Newburgh NY area and travel to CT alot, my girlfriend lives in ridgefield.... Anyway we can meet for these?
They are all yours man. He wanted me to ship them and that's not an option. I said if he's in Westchester I might meet him, never heard back and I'm not holding onto them. Lets bring this to PMs so I can give you my info!

Last edited by Patsfan34; 12-14-2009 at 05:01 PM.
Patsfan34 is offline   Reply With Quote
Old 12-15-2009, 08:51 AM   #21
Patsfan34
Restoring a 70 4x4
 
Patsfan34's Avatar
 
Join Date: Dec 2008
Location: New England
Posts: 664
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

^^^
Patsfan34 is offline   Reply With Quote
Old 12-16-2009, 01:02 PM   #22
Patsfan34
Restoring a 70 4x4
 
Patsfan34's Avatar
 
Join Date: Dec 2008
Location: New England
Posts: 664
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

Split manifold and exhaust are SOLD!
Patsfan34 is offline   Reply With Quote
Old 12-17-2009, 08:15 AM   #23
Patsfan34
Restoring a 70 4x4
 
Patsfan34's Avatar
 
Join Date: Dec 2008
Location: New England
Posts: 664
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

Morning bump!
Patsfan34 is offline   Reply With Quote
Old 12-18-2009, 06:45 PM   #24
Patsfan34
Restoring a 70 4x4
 
Patsfan34's Avatar
 
Join Date: Dec 2008
Location: New England
Posts: 664
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

Everyone keeps telling me how rare this engine is and what a great price but no one is saying they want the whole thing. C'mon guys I'm giving this thing away. I know I'll make more by parting it out but I would really like to see it go complete
Patsfan34 is offline   Reply With Quote
Old 12-18-2009, 08:25 PM   #25
N2GMTrux
Registered User
 
N2GMTrux's Avatar
 
Join Date: Jan 2007
Location: Fort Worth, TX 76133
Posts: 378
Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust

Just letting you know still interested in the the complete motor mount setup still. P.M. me if it gets to parting it out in cSe I lose track of this posting.

& here is a bump for you..... To the top ^^^
N2GMTrux is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:51 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com