AL 57 Chevy parts truck for sale

[GMCNUT]

Got a 57 short bed truck out of the junkyard the other day because it was a factory V8 shortbed with a nice frame and despite the rough appearance of multiple peeling paint jobs, it actually has solid doors. So I am keeping the frame and doors for my future 57 Cameo project, and either going to crush or sell off the cab, bed, and whole complete front end. Its a small back glass truck w/ no rot in the door pillars which is tough to find, but it has a manual shifter sticking up out of the trans cover so that cover is buggered and a little of the floor pan adjacent to the cut out cover was bent upward to clear the shifter. It has only a small series of holes in the pass side floorboard, otherwise solid floors. Has a strange square hole cut out on the firewall to clear the 350 engine they installed looks like, but could be fixed. This cab is too good to crush, but if no one wants to make an offer and come get it in Alabama I understand and will crush it later this month....front fenders are present but only the pass side is restorable in my opinion. Inners are perfect, and it has all the grille and core support related stuff all together - Bed is un-rotted everywhere except the drivers rear fender where it meets the step is rusted out. Actual box sides are great. Somebody make me an offer and save this old bird before she meets the jaws of death - I would so rather somebody be able to use it than crush it - I estimate its about 250.00 in scrap if I crush the cab, bed and front end sheetmetal all at once....can be bought for any decent offer over scrap rates....

[GMCNUT]

Forgot to mention it also has a recently running 2bbl 350 V8 and the original 3 speed trans still in it - not keeping these either - you can buy any part of this truck that I am crushing or get the whole thing (minus frame and doors) for a better price.

[ScottH]

looking for a pair of sun visors and ebrake parts

[Mrcustom]

How about a fender spare tire mount?
Posted via Mobile Device

[ironhill]

Grill looks better than mine - what would you have to have for it?

[GMCNUT]

Originally Posted by ironhill

Grill looks better than mine - what would you have to have for it?

Not so much what I'd have to have for the grill as it is what I'd have to have for the label pulling it - I'd rather be shot that have to pull another 55-57 grille. Seems to be a painful thing every time I have to do it - I guess counting labor this one you see on the parts truck is 150.00

Just let me know if interested Thanks!

[GMCNUT]

Originally Posted by Mrcustom

How about a fender spare tire mount?
Posted via Mobile Device

I do not think I have one of those unless there is one on this 57 but I do not think it has one either

[GMCNUT]

Originally Posted by ScottH

looking for a pair of sun visors and ebrake parts

No E-brake parts because I am keeping the frame and no visors in this one - sorry

[made2drag]

how much for only the bed?
and how much for only the driver front fender?

[GMCNUT]

Originally Posted by made2drag

how much for only the bed?
and how much for only the driver front fender?

This truck was sold way back in February of this year...sorry. I do not have the parts you need currently