The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-05-2015, 05:16 PM   #1
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 16,660
Thumbs up New Product: CHUBTUBZ, shortened rear wheel tubs for slammed trucks!

**** Summer Sale through the 31 May 2017!! 15% off of the CT44s and CT47s! ****


UPDATED PRICING on ChubTubz For C10s!!!!

Due to some streamlining in our manufacturing process, we have been able to reduce the cost of production. Soooooo, I'm going to pass that on to our customers!!!

NEW PRICING:

CT44's - $550 + Shipping (10-12" wide wheel and tire)
CT47's - $650 + Shipping (15" wide wheel and tire)

Paypal preferred or Check or USPS money order.

If you have any question on fitment, please inquire! (text at 850-2NINE1-0499 or PM)

"ChubTubz!"

"Designed for the 67-87 C10s, they will also work for the 60-66 with a small amount of fiberglass work."



For the last 4 years I've been working on building a 1968 SWB that has a front and rear Porterbuilt extreme dropmember setup. Because of the large step notch in the rear, I had to raise my bed floor to clear it. This obviously created a problem with the rear wheel tubs being to tall to fit.

You can approach making the rear tubs many different ways, but I chose to try and make them look as stock as possible. So I built a set of steel ones that I shortened by 4" and widened by 1". I also made the tubs contour to the inner bed panel to fully achieve a factory fit and appearance.

Each tub required 2 factory tubs and about 15 hours worth of work to build. I know a lot of guys don't have the tools, skills, or the time to spend building these and paying someone to build a set of steel ones is cost prohibitive. So after I finished making my set of steel ones, I decided to talk to a local boat shop that does fiberglass mold building. Once I was convinced that we could make a good part that would be economically feasible, I had them pull a mold off of one my steel tubs. After I was sure of the fit and finish, I'm now ready to produce them for sale. They are designed for the 67-72 trucks, but with some small modifications, they will also work for the 73-87 trucks. Initial price will be $500/set + shipping. You can text me at 850-291-0499 or email me at robhartley@aol.com if you have any specific questions

Here are some photos of the original steel tubs that I made, and pictures of the fiberglass tubs. If you have any questions, please let me know. Thanks - Rob
Attached Images
     
__________________
Rob - http://instagram.com/hart_rod
As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17

FOR SALE: DBW pedal bracket, Pedal adapter for LS trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=651123
FOR SALE: ChubTubz, Rear tubs for slammed trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=675754
FOR SALE: Hood Brackets, Bolt in hood brackets! http://67-72chevytrucks.com/vboard/s...d.php?t=679945


1969 SuperBurb - 5.3/Magnacharger..http://67-72chevytrucks.com/vboard/s...d.php?t=200387
1968 Farm truck: LS3/6L80/TVS1900: http://67-72chevytrucks.com/vboard/s...d.php?t=358692
1968 SWB - SHIFTED: PB Xtreme DM/LS1/Dakota Digital/AccuAir/Vintage Air/...http://67-72chevytrucks.com/vboard/s...d.php?t=551258
1948 5 Window Chevy http://67-72chevytrucks.com/vboard/s...=122164&page=3
FAQ: http://67-72chevytrucks.com/vboard/f...play.php?f=220

Last edited by Hart_Rod; 05-16-2017 at 12:41 PM. Reason: Title edit
Hart_Rod is offline   Reply With Quote
Old 07-05-2015, 05:19 PM   #2
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 16,660
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

Here are some pictures of the fiberglass tubs. If you have any questions please let me know.
Attached Images
     
__________________
Rob - http://instagram.com/hart_rod
As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17

FOR SALE: DBW pedal bracket, Pedal adapter for LS trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=651123
FOR SALE: ChubTubz, Rear tubs for slammed trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=675754
FOR SALE: Hood Brackets, Bolt in hood brackets! http://67-72chevytrucks.com/vboard/s...d.php?t=679945


1969 SuperBurb - 5.3/Magnacharger..http://67-72chevytrucks.com/vboard/s...d.php?t=200387
1968 Farm truck: LS3/6L80/TVS1900: http://67-72chevytrucks.com/vboard/s...d.php?t=358692
1968 SWB - SHIFTED: PB Xtreme DM/LS1/Dakota Digital/AccuAir/Vintage Air/...http://67-72chevytrucks.com/vboard/s...d.php?t=551258
1948 5 Window Chevy http://67-72chevytrucks.com/vboard/s...=122164&page=3
FAQ: http://67-72chevytrucks.com/vboard/f...play.php?f=220
Hart_Rod is offline   Reply With Quote
Old 07-05-2015, 07:48 PM   #3
Advanced Design
Senior Member
 
Advanced Design's Avatar
 
Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 5,697
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

Great idea with a great price that will save a ton of time too.
Well done Rob.
Doug
Advanced Design is offline   Reply With Quote
Old 07-05-2015, 10:52 PM   #4
dbb1025
Registered User
 
dbb1025's Avatar
 
Join Date: Jul 2013
Location: branford, connecticut
Posts: 197
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

I agree. I'm one of those guys without the skill knowledge or tools. When will they be available? What will be the best way to order?
dbb1025 is offline   Reply With Quote
Old 07-05-2015, 10:58 PM   #5
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 16,660
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

Quote:
Originally Posted by Advanced Design View Post
Great idea with a great price that will save a ton of time too.
Well done Rob.
Doug
Thanks Doug! I hope everyone likes them and appreciate the work that has went into them.

Quote:
Originally Posted by dbb1025 View Post
I agree. I'm one of those guys without the skill knowledge or tools. When will they be available? What will be the best way to order?
I'm taking pre-orders now. I currently have 8 names on the list. Paypal is preferred. Just let me know.
__________________
Rob - http://instagram.com/hart_rod
As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17

FOR SALE: DBW pedal bracket, Pedal adapter for LS trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=651123
FOR SALE: ChubTubz, Rear tubs for slammed trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=675754
FOR SALE: Hood Brackets, Bolt in hood brackets! http://67-72chevytrucks.com/vboard/s...d.php?t=679945


1969 SuperBurb - 5.3/Magnacharger..http://67-72chevytrucks.com/vboard/s...d.php?t=200387
1968 Farm truck: LS3/6L80/TVS1900: http://67-72chevytrucks.com/vboard/s...d.php?t=358692
1968 SWB - SHIFTED: PB Xtreme DM/LS1/Dakota Digital/AccuAir/Vintage Air/...http://67-72chevytrucks.com/vboard/s...d.php?t=551258
1948 5 Window Chevy http://67-72chevytrucks.com/vboard/s...=122164&page=3
FAQ: http://67-72chevytrucks.com/vboard/f...play.php?f=220
Hart_Rod is offline   Reply With Quote
Old 07-07-2015, 09:17 AM   #6
69short
Registered User
 
69short's Avatar
 
Join Date: May 2012
Location: DeKalb, MO
Posts: 507
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

I will be contacting you when I reach that point in my build. Great price! Looks like a nice product
69short is offline   Reply With Quote
Old 07-07-2015, 10:37 PM   #7
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 16,660
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

Quote:
Originally Posted by 69short View Post
I will be contacting you when I reach that point in my build. Great price! Looks like a nice product
Thanks Justin! Here are some pictures of the first set of CHUBTubz installed.
Attached Images
     
__________________
Rob - http://instagram.com/hart_rod
As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17

FOR SALE: DBW pedal bracket, Pedal adapter for LS trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=651123
FOR SALE: ChubTubz, Rear tubs for slammed trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=675754
FOR SALE: Hood Brackets, Bolt in hood brackets! http://67-72chevytrucks.com/vboard/s...d.php?t=679945


1969 SuperBurb - 5.3/Magnacharger..http://67-72chevytrucks.com/vboard/s...d.php?t=200387
1968 Farm truck: LS3/6L80/TVS1900: http://67-72chevytrucks.com/vboard/s...d.php?t=358692
1968 SWB - SHIFTED: PB Xtreme DM/LS1/Dakota Digital/AccuAir/Vintage Air/...http://67-72chevytrucks.com/vboard/s...d.php?t=551258
1948 5 Window Chevy http://67-72chevytrucks.com/vboard/s...=122164&page=3
FAQ: http://67-72chevytrucks.com/vboard/f...play.php?f=220

Last edited by Hart_Rod; 07-15-2015 at 08:07 AM.
Hart_Rod is offline   Reply With Quote
Old 07-07-2015, 10:40 PM   #8
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 16,660
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

More installed pictures.
Attached Images
    
__________________
Rob - http://instagram.com/hart_rod
As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17

FOR SALE: DBW pedal bracket, Pedal adapter for LS trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=651123
FOR SALE: ChubTubz, Rear tubs for slammed trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=675754
FOR SALE: Hood Brackets, Bolt in hood brackets! http://67-72chevytrucks.com/vboard/s...d.php?t=679945


1969 SuperBurb - 5.3/Magnacharger..http://67-72chevytrucks.com/vboard/s...d.php?t=200387
1968 Farm truck: LS3/6L80/TVS1900: http://67-72chevytrucks.com/vboard/s...d.php?t=358692
1968 SWB - SHIFTED: PB Xtreme DM/LS1/Dakota Digital/AccuAir/Vintage Air/...http://67-72chevytrucks.com/vboard/s...d.php?t=551258
1948 5 Window Chevy http://67-72chevytrucks.com/vboard/s...=122164&page=3
FAQ: http://67-72chevytrucks.com/vboard/f...play.php?f=220
Hart_Rod is offline   Reply With Quote
Old 07-08-2015, 01:17 AM   #9
ajgriffin
Registered User
 
ajgriffin's Avatar
 
Join Date: Feb 2008
Location: Carson, CA
Posts: 420
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

Looks great! What's the maximum tire width they will fit?
__________________
69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together
ajgriffin is offline   Reply With Quote
Old 07-08-2015, 01:21 AM   #10
70blackfish
Senior Member
 
Join Date: Oct 2012
Location: Newhall CA
Posts: 1,123
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

Nice work
__________________
69 GMC SWB
70blackfish is offline   Reply With Quote
Old 07-08-2015, 08:47 AM   #11
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 16,660
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

Quote:
Originally Posted by 70blackfish View Post
Nice work
Thanks!

Quote:
Originally Posted by ajgriffin View Post
Looks great! What's the maximum tire width they will fit?
These will allow you to run a 12 - 13" tire. I'm running a 295/45 20 on my truck and they fit great. We are working on a 4" wider tub that will go all the way to the frame and allow you to run a 15-16" tired.
__________________
Rob - http://instagram.com/hart_rod
As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17

FOR SALE: DBW pedal bracket, Pedal adapter for LS trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=651123
FOR SALE: ChubTubz, Rear tubs for slammed trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=675754
FOR SALE: Hood Brackets, Bolt in hood brackets! http://67-72chevytrucks.com/vboard/s...d.php?t=679945


1969 SuperBurb - 5.3/Magnacharger..http://67-72chevytrucks.com/vboard/s...d.php?t=200387
1968 Farm truck: LS3/6L80/TVS1900: http://67-72chevytrucks.com/vboard/s...d.php?t=358692
1968 SWB - SHIFTED: PB Xtreme DM/LS1/Dakota Digital/AccuAir/Vintage Air/...http://67-72chevytrucks.com/vboard/s...d.php?t=551258
1948 5 Window Chevy http://67-72chevytrucks.com/vboard/s...=122164&page=3
FAQ: http://67-72chevytrucks.com/vboard/f...play.php?f=220

Last edited by Hart_Rod; 07-15-2015 at 08:08 AM.
Hart_Rod is offline   Reply With Quote
Old 07-10-2015, 11:56 AM   #12
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 17,249
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

Rob,

What is the thickness of these? I like them & look forward to the wider version (I plan on 13" wide rear wheels).

I worry about debris damaging them & wondering if an aluminum sheet bonded to the bottom might help w/that. Your thoughts?
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides

Building a small, high rpm engine
with the perfect bore, stroke and rod ratio is very impressive...
like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.

Cubic inches is like Indiana Jones with a cheap pistol....
SCOTI is offline   Reply With Quote
Old 07-10-2015, 12:07 PM   #13
lolife99
Registered User
 
lolife99's Avatar
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,056
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

SCOTI,... could you use that "Rock Guard" style coating on the inside of them?
Not sure what anyone is doing with the aftermarket fiberglass front tubs to prevent damage from rocks.
Maybe it's all about fiberglass thicknesss.
__________________
Keith
lolife99 is offline   Reply With Quote
Old 07-10-2015, 12:22 PM   #14
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 17,249
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

Quote:
Originally Posted by lolife99 View Post
SCOTI,... could you use that "Rock Guard" style coating on the inside of them?
Not sure what anyone is doing with the aftermarket fiberglass front tubs to prevent damage from rocks.
Maybe it's all about fiberglass thicknesss
.
Exactly. Even on the front tubs for my dually, I plan to bond something underside.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides

Building a small, high rpm engine
with the perfect bore, stroke and rod ratio is very impressive...
like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.

Cubic inches is like Indiana Jones with a cheap pistol....
SCOTI is offline   Reply With Quote
Old 07-10-2015, 01:24 PM   #15
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 16,660
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

Quote:
Originally Posted by SCOTI View Post
Rob,

What is the thickness of these? I like them & look forward to the wider version (I plan on 13" wide rear wheels).

I worry about debris damaging them & wondering if an aluminum sheet bonded to the bottom might help w/that. Your thoughts?
Quote:
Originally Posted by lolife99 View Post
SCOTI,... could you use that "Rock Guard" style coating on the inside of them?
Not sure what anyone is doing with the aftermarket fiberglass front tubs to prevent damage from rocks.
Maybe it's all about fiberglass thicknesss.
Quote:
Originally Posted by SCOTI View Post
Exactly. Even on the front tubs for my dually, I plan to bond something underside.
The tubs are about 3/16" to 1/4" thick, extremely sturdy. I don't think it's an issue with the fiberglass cracking, I think it's more of an issue with the paint cracking. With that being said, I plan on spraying the underside of mine (front and rear) with a rubberized coating, such a Line-x or Speedyliner. I have a lot friends that have built high dollar glass street rods and that's what they have used with great success. Thanks for the great questions and feedback!
__________________
Rob - http://instagram.com/hart_rod
As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17

FOR SALE: DBW pedal bracket, Pedal adapter for LS trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=651123
FOR SALE: ChubTubz, Rear tubs for slammed trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=675754
FOR SALE: Hood Brackets, Bolt in hood brackets! http://67-72chevytrucks.com/vboard/s...d.php?t=679945


1969 SuperBurb - 5.3/Magnacharger..http://67-72chevytrucks.com/vboard/s...d.php?t=200387
1968 Farm truck: LS3/6L80/TVS1900: http://67-72chevytrucks.com/vboard/s...d.php?t=358692
1968 SWB - SHIFTED: PB Xtreme DM/LS1/Dakota Digital/AccuAir/Vintage Air/...http://67-72chevytrucks.com/vboard/s...d.php?t=551258
1948 5 Window Chevy http://67-72chevytrucks.com/vboard/s...=122164&page=3
FAQ: http://67-72chevytrucks.com/vboard/f...play.php?f=220

Last edited by Hart_Rod; 08-12-2015 at 08:03 PM. Reason: 3/8" to 3/16th
Hart_Rod is offline   Reply With Quote
Old 07-10-2015, 07:52 PM   #16
nlped
Get me a bigger HAMMER!!!
 
nlped's Avatar
 
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 3,280
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

Hey Rob, for convenience sake, how much is shipping to 35079?
__________________
Carter

1968 Chevy SWB Fleet... Walt

1963-1/2 Ford Falcon Futura Sprint...Martha
nlped is offline   Reply With Quote
Old 07-10-2015, 08:56 PM   #17
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 16,660
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

Quote:
Originally Posted by nlped View Post
Hey Rob, for convenience sake, how much is shipping to 35079?
Approximately $50.
__________________
Rob - http://instagram.com/hart_rod
As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17

FOR SALE: DBW pedal bracket, Pedal adapter for LS trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=651123
FOR SALE: ChubTubz, Rear tubs for slammed trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=675754
FOR SALE: Hood Brackets, Bolt in hood brackets! http://67-72chevytrucks.com/vboard/s...d.php?t=679945


1969 SuperBurb - 5.3/Magnacharger..http://67-72chevytrucks.com/vboard/s...d.php?t=200387
1968 Farm truck: LS3/6L80/TVS1900: http://67-72chevytrucks.com/vboard/s...d.php?t=358692
1968 SWB - SHIFTED: PB Xtreme DM/LS1/Dakota Digital/AccuAir/Vintage Air/...http://67-72chevytrucks.com/vboard/s...d.php?t=551258
1948 5 Window Chevy http://67-72chevytrucks.com/vboard/s...=122164&page=3
FAQ: http://67-72chevytrucks.com/vboard/f...play.php?f=220
Hart_Rod is offline   Reply With Quote
Old 07-10-2015, 08:59 PM   #18
nlped
Get me a bigger HAMMER!!!
 
nlped's Avatar
 
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 3,280
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

So $550 shipped? If so, shoot me your Paypal info. They look great, and you've always done great work. So I'm good with it.
__________________
Carter

1968 Chevy SWB Fleet... Walt

1963-1/2 Ford Falcon Futura Sprint...Martha
nlped is offline   Reply With Quote
Old 07-10-2015, 10:00 PM   #19
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 16,660
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

Pm sent
__________________
Rob - http://instagram.com/hart_rod
As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17

FOR SALE: DBW pedal bracket, Pedal adapter for LS trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=651123
FOR SALE: ChubTubz, Rear tubs for slammed trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=675754
FOR SALE: Hood Brackets, Bolt in hood brackets! http://67-72chevytrucks.com/vboard/s...d.php?t=679945


1969 SuperBurb - 5.3/Magnacharger..http://67-72chevytrucks.com/vboard/s...d.php?t=200387
1968 Farm truck: LS3/6L80/TVS1900: http://67-72chevytrucks.com/vboard/s...d.php?t=358692
1968 SWB - SHIFTED: PB Xtreme DM/LS1/Dakota Digital/AccuAir/Vintage Air/...http://67-72chevytrucks.com/vboard/s...d.php?t=551258
1948 5 Window Chevy http://67-72chevytrucks.com/vboard/s...=122164&page=3
FAQ: http://67-72chevytrucks.com/vboard/f...play.php?f=220
Hart_Rod is offline   Reply With Quote
Old 07-14-2015, 10:12 PM   #20
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 16,660
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

I had the buy painting my bed shoot some paint on the tubs. What do you guys think? I'm also thinking about changing the name to "ChubTubz". My good friend Ronnie Welch (C10Talk from instagram fame, ) suggested it. It seems a little catchier than FatTubz...OBTW, here ar some pictures, !
Attached Images
     
__________________
Rob - http://instagram.com/hart_rod
As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17

FOR SALE: DBW pedal bracket, Pedal adapter for LS trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=651123
FOR SALE: ChubTubz, Rear tubs for slammed trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=675754
FOR SALE: Hood Brackets, Bolt in hood brackets! http://67-72chevytrucks.com/vboard/s...d.php?t=679945


1969 SuperBurb - 5.3/Magnacharger..http://67-72chevytrucks.com/vboard/s...d.php?t=200387
1968 Farm truck: LS3/6L80/TVS1900: http://67-72chevytrucks.com/vboard/s...d.php?t=358692
1968 SWB - SHIFTED: PB Xtreme DM/LS1/Dakota Digital/AccuAir/Vintage Air/...http://67-72chevytrucks.com/vboard/s...d.php?t=551258
1948 5 Window Chevy http://67-72chevytrucks.com/vboard/s...=122164&page=3
FAQ: http://67-72chevytrucks.com/vboard/f...play.php?f=220
Hart_Rod is offline   Reply With Quote
Old 07-14-2015, 10:30 PM   #21
lolife99
Registered User
 
lolife99's Avatar
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,056
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

I like the fact that these aren't pre-drilled.
A set a stainless button-head bolts with stainless washers, would look nice holding these down.
__________________
Keith
lolife99 is offline   Reply With Quote
Old 07-14-2015, 10:50 PM   #22
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 16,660
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

Quote:
Originally Posted by lolife99 View Post
I like the fact that these aren't pre-drilled.
A set a stainless button-head bolts with stainless washers, would look nice holding these down.
Thanks Keith. I wanted to give people an option on how they attached them because I know everyone does things a little different,
__________________
Rob - http://instagram.com/hart_rod
As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17

FOR SALE: DBW pedal bracket, Pedal adapter for LS trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=651123
FOR SALE: ChubTubz, Rear tubs for slammed trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=675754
FOR SALE: Hood Brackets, Bolt in hood brackets! http://67-72chevytrucks.com/vboard/s...d.php?t=679945


1969 SuperBurb - 5.3/Magnacharger..http://67-72chevytrucks.com/vboard/s...d.php?t=200387
1968 Farm truck: LS3/6L80/TVS1900: http://67-72chevytrucks.com/vboard/s...d.php?t=358692
1968 SWB - SHIFTED: PB Xtreme DM/LS1/Dakota Digital/AccuAir/Vintage Air/...http://67-72chevytrucks.com/vboard/s...d.php?t=551258
1948 5 Window Chevy http://67-72chevytrucks.com/vboard/s...=122164&page=3
FAQ: http://67-72chevytrucks.com/vboard/f...play.php?f=220
Hart_Rod is offline   Reply With Quote
Old 07-14-2015, 10:57 PM   #23
nlped
Get me a bigger HAMMER!!!
 
nlped's Avatar
 
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 3,280
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

Those look really good, especially with my color on them
__________________
Carter

1968 Chevy SWB Fleet... Walt

1963-1/2 Ford Falcon Futura Sprint...Martha
nlped is offline   Reply With Quote
Old 07-14-2015, 11:36 PM   #24
69short
Registered User
 
69short's Avatar
 
Join Date: May 2012
Location: DeKalb, MO
Posts: 507
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

Keep the original name and call the wider version chubtubz lol
69short is offline   Reply With Quote
Old 07-15-2015, 12:21 AM   #25
Twisted78SS
Wide n'Low
 
Twisted78SS's Avatar
 
Join Date: Jan 2007
Location: La Center, WA
Posts: 1,468
Re: New Product: Shortened rear wheel tubs for Slammed rear trucks

Damn those look sweet!! Very well done..
__________________
Trippin Hazard.. 67 swb, Crate LS3, Porterbuilt Level 3, Extreme, Dakota HDX, ChubTubz, SloshTubz, and tons more
Gold Member - 68 Suburban, 5.3LS 4L80e, bagged, buckets, barn find survivor
72 GMC Shortwide - Project Zachamachi...
75 Blazer 4x4 350/4spd/205 Tach/Tilt
Air Force Retired
My other distractions - Cycling - Bikepacking
Twisted78SS is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:55 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com