Re: 67-72 cab corner 6x9 speaker brackets
 

That was quick delivery. I never realized that they would hide all the things in the corner of the cab, not to mention that they look and fit great. I will say i wish i had gotten them before i installed the seat. Im trying to contort my 320 lb girlish figure into shapes olympic gymnasts would be envious of. I got he driver side in, but im saving the passenger side untill i have an extra set of hands. thanks again! Now its time to find a radio, amp, and speakers....
Posted via Mobile Device

Re: 67-72 cab corner 6x9 speaker brackets
 

Thank you for the feedback, and I am glad you like them. I spent a good deal of time designing them to fit perfect, and I am glad you noticed how well they hide the ugly cab corners...that was a goal of mine.

Good luck on the rest of the install, please post pictures when you button everything up.

Re: 67-72 cab corner 6x9 speaker brackets
 

Ill take a set of the 67-72 with holes if you have any more available

Re: 67-72 cab corner 6x9 speaker brackets
 

PM sent

Re: 67-72 cab corner 6x9 speaker brackets
 

let me help u out, ttt

Re: 67-72 cab corner 6x9 speaker brackets
 

PM sent.

Re: 67-72 cab corner 6x9 speaker brackets
 

ttt

Re: 67-72 cab corner 6x9 speaker brackets
 

I'll take a set with holes.

Re: 67-72 cab corner 6x9 speaker brackets
 

PM sent :)

Re: 67-72 cab corner 6x9 speaker brackets
 

pmt sent. Thanks.

Re: 67-72 cab corner 6x9 speaker brackets
 

I just sent you a PM. thanks

Re: 67-72 cab corner 6x9 speaker brackets
 

Chuck, got it, thank you. Brackets will go out Friday.

Nitro, PM replied. :)

Re: 67-72 cab corner 6x9 speaker brackets
 

I need a set with holes, for my 69..

Re: 67-72 cab corner 6x9 speaker brackets
 

PM sent :)

Re: 67-72 cab corner 6x9 speaker brackets
 

Got it.. Payment sent..

Re: 67-72 cab corner 6x9 speaker brackets
 

Guys, all three of your brackets will be in tomorrows mail (Friday). Thanks for the purchase, have a great Labor Day weekend!

Re: 67-72 cab corner 6x9 speaker brackets
 

I got mine today and installed them. I welded the bottom bracket to the cab floor instead of drilling the holes and mounting. I had to put a little more angle on (the bottom brackets) to make them sit flush with the floor. I will put Dynamat throughout my cab after I clean and paint the inside of my cab corners. Then I'll re-install them.
I am pleased with the quality of the brackets and if any of you are on the fence about buying a set, They are worth the money imo. I would spend a lot of time trying to get the cuts and correct bends on these if I were to start from scratch. I installed mine in about 30 minutes.

Re: 67-72 cab corner 6x9 speaker brackets
 

Also my jack will fit where its supposed to, I just left it off.

Re: 67-72 cab corner 6x9 speaker brackets
 

Sweet nice job ......
Posted via Mobile Device

Re: 67-72 cab corner 6x9 speaker brackets
 

thanks!

Re: 67-72 cab corner 6x9 speaker brackets
 

got mine today, and have to say they are a beautiful piece. will make a nice addition to my truck. thanks for making these available bigblock73

Re: 67-72 cab corner 6x9 speaker brackets
 

Thank you for the feedback, and your install looks great! You might have been able to tack weld them where the pilot holes were too, might have made it a bit cleaner...not that you will even see the floor brackets anyhow.

If I understood you correctly, you said the factory floor jack assembly will clear the passenger bracket? if so, that is great...I didn't have an assembly in the junk cab I bought to create these.

Again, thanks for the feedback!

Re: 67-72 cab corner 6x9 speaker brackets
 

You are welcome, and thank you for the feedback as well.

Re: 67-72 cab corner 6x9 speaker brackets
 

Folks, the next batch I order, I am going to have the shop cut some with 6.5" openings, for those wanting to run components. If anyone is interested, please PM me...if I get enough interest, we can set up a pre-orders and I can have them cut and delivered sooner.

Price will be the same as these too. :)

Re: 67-72 cab corner 6x9 speaker brackets
 

I will take a set with the 6x9 opening in them if you still have any!