Re: 71 4X4 Frame off Restoration
 

I spent the last 3 week ends media blasting door parts and I wasted my time as I'm installing 72 door panels and looking on the vender web sites this last week end for some replacement part for my doors the 72 door panels are thicker and require longer shafts for the window and door handles to mount. Frustrating I wasted 3 week ends, blasting media materials and paint. 1 step forward and 2 steps back.

Re: 71 4X4 Frame off Restoration
 

Don't you love cars & trucks! :m7:

Maybe you can finish the door hardware and sell it on?

Re: 71 4X4 Frame off Restoration
 

I forgot that when I picked up my 69 suburban I got an extra set of doors from a 72 burb. started removing the window and lock part cleaning and painting them. The shafts for 72 door panel are only 1/4" longer than previous years. good thing is I'm moving forward now. I should be getting my frame back from power coating next week. then I can start putting my truck back together. I stopped by Sky's shop this morning and final body work has begone. the bed is about half way with body work. I sold the LS 5.3 out of my 2004 Suburban and should have it stripped down by next week end and set aside the front, back seats for my truck. will see what other part I can use to finish off the build.

Re: 71 4X4 Frame off Restoration
 

nice build :bowtie:

Re: 71 4X4 Frame off Restoration
 

Bed is looking good. Keep at it!

Chris

Re: 71 4X4 Frame off Restoration
 

Bed is looking good alright, a lot of work.

Re: 71 4X4 Frame off Restoration
 

This bed is one of those thing ( you get what you pay for) I picked it up for $400.00 and the floor was rotted out so I picked up a new bed floor $1,000.00 + the other bed I bought $400 back when I was still building a long bed. by the time the body work is done it will have cost me about $3,400. I took parts from both beds to make the one short bed. I am happy with how it's turning out. At least most of the bed is original parts except of the floor. I do have a long bed floor in good shape and bed side that are ok the side have the gas tank door cut in the right and left side.

Re: 71 4X4 Frame off Restoration
 

Bed is looking super, it's gonna be sweet!

Re: 71 4X4 Frame off Restoration
 

I'm like a kid in candy store. I can't get the sheet metal painted fast enough. With my rear shackles not being the same I ordered a shackle flip kit from ORD and it was sitting on my door step last night when I got home from work. the kit will eliminate the 4" blocks as well. Now I just need my frame back from power coating.

Re: 71 4X4 Frame off Restoration
 

Called my power coater today and they have not started my frame. They said next week. I'm bummed out garage full of part and no place to put them. I did get a new piece of glass and gloves for my medial blasting cabinet so I can get it back up and running.

Re: 71 4X4 Frame off Restoration
 

The bed looks great! Good luck getting your frame back soon!

Re: 71 4X4 Frame off Restoration
 

My favorite restoration saying...."hurry up and wait" If I had a dollar for every promise a company made me regarding time, I would be restoring two trucks instead of one.

Can't wait to see that nice powder coated frame.
Chris

Re: 71 4X4 Frame off Restoration
 

This is the first time they let me down on delivering on time. Part of the delay might be I asked for pricing on the 29 part I'm having them power coat. The owner Bob was not in when I dropped off the parts. Got my blasting cabinet back together I installed a sheet of polycarbonate to protect the glass and now I get reflection of what is behind me, I think I will remove the poly and run with out it. I did get some window and door latch part for the drivers door blasted and painted yesterday.

Re: 71 4X4 Frame off Restoration
 

Going to be a cool truck! subscribed

Re: 71 4X4 Frame off Restoration
 

Just got off the phone with my power coater and I will be able to pick up my fame Friday Morning. only bummer is it is going to be raining Friday through Sunday and I don't have a shop to work in.

Re: 71 4X4 Frame off Restoration
 

Can they blast and prime? A little more out of pocket now may prevent a headach from dealing with flash rust down the road ??

Re: 71 4X4 Frame off Restoration
 

I picked up my frame and 28 other parts from power coating today. All the parts look great. I can't wait to start putting it back together. but it has been raining sense I brought it home. I picked up some new center bolt for the leaf springs at 4 wheel part and they only had 1 pair. Have to wait until next week to get the other pair. Ya I know my garage is full of tools and part what a mess.

Re: 71 4X4 Frame off Restoration
 

That stinks it's raining, but at least you got the frame and parts back! My shop is in a similar state. I have to clean it up before I can get a truck in the other side of it.

Re: 71 4X4 Frame off Restoration
 

Do you just leave that overhead hoist in the driveway all the time? I want one bad but no where to put it.

Your garage looks like mine so i decided to spend the last couple weeks with the wet weather building a small lean too shed so i can get some of the stuff out of the garage and out of my way. almost done with it.

Cool that you got your parts back now too.

Re: 71 4X4 Frame off Restoration
 

I just leave the hoist in the drive way. when I'm done with all the work I can lower it down and roll it over to the side yard I have 5' gate it will just fit. I got some work done in-between rain drops today. Installed the shackle flip brackets on the frame along with a couple challenges. I left 2 bracket that supported the stock spring perch on the bottom of the frame and it is interfering with the shackle flip kit so I broke a drill bit drilling out the rivets. finally got them installed had to touch up some paint though. put the rear springs together and started on the front springs but I will have to wait until Monday to get the 2nd pair of center bolts so I can finst putting them together.

Re: 71 4X4 Frame off Restoration
 

:waah: Raining harder today so I worked on the front leaf springs prepping them to install the center bolts. I'm having a hard time finding new clutch and break peddle bushings attached is a picture of what they look like. LMC sells the smaller bushing for the clutch peddle I have not had any luck with the larger bushing for the break peddle.

Re: 71 4X4 Frame off Restoration
 

I found the break peddle bushing from Classic Parts Inc. and the clutch peddle bushing at LMC Truck. Now I can finish rebuilding the peddle assembly.

Re: 71 4X4 Frame off Restoration
 

Making progress! Sucks having to leave the frame outside.

Re: 71 4X4 Frame off Restoration
 

Might be time for a car cover and weight it down with ropes and heavy objects.. Rain just sucks.

Re: 71 4X4 Frame off Restoration
 

It's bummer to leave it out side. I had a cheep easy up but I did not tie it down and it cost me $2,000.00 to fix my neighbors car last summer from the wind blowing. Its a pain to move every time I need to lift something heavy with the over head lift or cheery picker. I might do something after the heavy work is done and set up another easy up.