Re: Show us your projects
Nice!
|
Re: Show us your projects
Quote:
|
Re: Show us your projects
Quote:
|
Re: Show us your projects
Quote:
|
Re: Show us your projects
1 Attachment(s)
here she is already for paint and interior, 350, 700r,
|
Re: Show us your projects
Quote:
|
Re: Show us your projects
Quote:
|
Re: Show us your projects
Quote:
|
Re: Show us your projects
Quote:
|
Re: Show us your projects
1 Attachment(s)
Got the 216 and straight axle out and the new IFS welded in over the last few days
|
Re: Show us your projects
5 Attachment(s)
'53 5 window with '62 283, SM465 trans and Camaro 10bolt
|
Re: Show us your projects
Quote:
Now thats a sweetie :-) |
Re: Show us your projects
2 Attachment(s)
Wow.....nice looking rides on this thread! My under construction 51 GMC with 235 4 spd. Drove it from southern Oregan up to Vancouver, B.C. ....55mph all the way !!
|
Re: Show us your projects
2 Attachment(s)
Here are a couple of pictures of our 55 Suburban. My dad bought this in 1958. It had been in a barn for the past 14 years. We are in the process of bringing it back to life.
|
Re: Show us your projects
The Burb looks sweet...
Marc |
Re: Show us your projects
Nice.
its going to be a sweet ride when its restored. -Larry |
Re: Show us your projects
lucky man
|
Re: Show us your projects
Thanks. Frame is complete. TCI front clip installed. 5.3L with 4L60E trans from a 2004 Tahoe sets between the frame rails, but still need to finish the wiring harness, cooling system and exhaust.
I would like to install a dash from a 55 Chevy car or maybe from an early Chevy II. Tail lights from a 54 Chevy car. Don't get to work on it as much as I would like to. My wife has her important projects too. |
Re: Show us your projects
1 Attachment(s)
Got the 283 and T5 in. Now on to the dual master cylinder , exhaust and new fuel and brake lines.
|
Re: Show us your projects
nice rides guys
|
Re: Show us your projects
2 Attachment(s)
Here's a 53 3600 with the original drivetrain I'm workin' on with a friend. Hoping to sell it to someone shortly as a running/driving project someone can finish the way they want. very solid body, good running 216, complete brake system rebuild, new glass, etc.
|
Re: Show us your projects
4 Attachment(s)
Just got this 1978 K20 Bonanza yesterday. Got it from a machine shop and they even delivered it. Newly rebuilt th350. Engine totally gone through with crank tunred, new rings, valve job, new water pump, oil pump, gas pump, etc. Has gauge options an at one time ran a light bar on the roof with electric switch still in, wires cut and taped off. Has delay wiper, electric brakes and heavy duty trans/oil cooler.
Going to make it a toy hawler for long distance trips. Been sitting awhile, so will have some major cleaning to do. Its 100% complete at least. |
Re: Show us your projects
4 Attachment(s)
This is a California truck. The guys who owned it before me did a lot of work on it buy installing a rebuilt Chevy 350 engine, 350 transmission, and Ford 9" rear end. They did a ton of body work as well, plus a lot of work on the inside of the cab. I have since changed out the wheels and tires, and cut out the metal bed getting it ready for a wooden bed at some point after it is painted. I had to do some work on the suspended brake pedal by lengthing and off setting is as well as install a Chevy S10 gas pedal assembly(as well as move it in closer to the brake pedal) because they were a foot apart (now 3" apart). I removed the bench seat, cut the seat bracket out as well as the gas tank. I installed the gas tank under the bed between the rear end differential and the end of the bed. A new wiper motor made this system work better as well. My next project is to have the floor carpeted and install bucket seats (200 Chevy Silverado) and a console I picked up. I also plan on installing a Mustang II front end which has power disc brakes, coilover shocks, and power rack & pinion steering, as well as rear power disc brakes. Then a Vintage Air system. Additional interior upholstery will be in the works next fall. Then a paint job plus adding trhe wooden bed will just about complete the project. I will also redo the inside as far as building a full length console and moving the transmission shifter to the console as well as the radio. I cannot sit still. I just finished doing an off the frame restoration on my 1979 Triumph Bonneville bike and found myself getting bored. As my wife says "Big Toys For Big Boys". My reply was that I had to find new projects since I could no longer chase women.
Attachment 839662 Attachment 839663 Attachment 839664 Attachment 839665 |
Re: Show us your projects
2 Attachment(s)
Picked up another last week. Found this in Worcester MA last week. Picked it up for $1500 and its now in my driveway. Now there are 2.
|
Re: Show us your projects
For the win! Nice score.
|
All times are GMT -4. The time now is 05:02 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com