The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   1972 Chevy p/u NewType Build (https://67-72chevytrucks.com/vboard/showthread.php?t=507903)

NewType72 02-05-2013 04:00 AM

Re: 1972 Chevy p/u NewType Build
 
No doubt Leon, then again possibility of new COATED headers this time
Posted via Mobile Device

screaminchevypickup 02-05-2013 04:03 AM

Re: 1972 Chevy p/u NewType Build
 
Cool panels that's how I had them in my old black 72..
Posted via Mobile Device

shawno72 02-05-2013 08:32 AM

Re: 1972 Chevy p/u NewType Build
 
Get some ceramic coated headers, them purdy,...:D

502ms 02-05-2013 09:08 AM

Re: 1972 Chevy p/u NewType Build
 
Coated - but not with oil (FTW) :)

I hope this gets it this time. Then you can focus on slamming your dually. ;)

NewType72 02-05-2013 11:10 AM

Re: 1972 Chevy p/u NewType Build
 
Quote:

Originally Posted by screaminchevypickup (Post 5868561)
Cool panels that's how I had them in my old black 72..
Posted via Mobile Device

Thank you I have the second coat of primer on them right now so ill see how they look by this afternoon and maybe shoot some black so they dry in some actual sunlight today

We thought we got coated ones the first time Shawn and they chipped and faded immediately so disappointing

No bagging the dually it's got too many main issues to be possible right now.
Posted via Mobile Device

NewType72 02-05-2013 01:42 PM

Re: 1972 Chevy p/u NewType Build
 
Driver side is definitely not cracked I had some loose bolts that I tightened last night but still have a leak so I think ill check the gaskets tonight or tmrw and find out if they blew or not
Posted via Mobile Device

NewType72 02-06-2013 04:22 AM

Re: 1972 Chevy p/u NewType Build
 
Well new foil stock style header gaskets installed still have a leak pass. side was starting to go so that's fine deduced that its my passenger side collector gasket that is blown oh well I'll work on that by saturday to get my specialty ones on.

no major leaking so far however I now see that my breater is definitely an issue so I'll be looking for suggestions as to what else I can run since this one is junk and has already started over-flowing from the valve cover. Any preferences??

My father stopped by so we ran down a checklist for the next week since next Thursday the 14th of Feb. will be the Beginning of the Sacramento Autorama and my very first car show of the 2013 season so stoked to be on display up there!!

He also helped my figure out my ground issue and crappy wiring from the p.o. for my marker,halo, and park light so I have all functioning lights again except for my cargo still waiting on feedback there for a new connector.

and Finally I laid out two coats of semi-gloss black on my door panel inserts they look pretty good so far I'll let them dry up real good and shoot them one last time and then work on taping off for doing the bevel in silver metallic if I can, trim is being polished for the future install maybe have them on by Saturday night

shawno72 02-06-2013 08:43 AM

Re: 1972 Chevy p/u NewType Build
 
We need pics of stuff :D hey your gonna be passing right by Lodi ;)
Posted via Mobile Device

NewType72 02-06-2013 11:00 PM

Re: 1972 Chevy p/u NewType Build
 
Hey hey as much as I post pictures I figured you guys were going nuts behind the computer or phone :lol: and sorry my phone was down last night and today so nothing right now but I'll upload in a couple hours or so laid another top coat of black on my inserts may need one more just to be sure they're smooth.

so far very few drips of oil none at work and only one about the diameter of a valve stem cap which is leaps and bounds from before :D

and I'll certainly get some insider pics from the event should be hot and heavy getting the truck detailed this weekend

NewType72 02-07-2013 05:12 AM

Re: 1972 Chevy p/u NewType Build
 
Here's the recent pic of my inserts one last coat this weekend I hope and then adding the silver embossed area afterwards no clear on these.
http://i1111.photobucket.com/albums/...NewType524.jpg
and then this is my possible restoration steering wheel kinda getting glum on it already as it has ALOT of work to make right trying to find a nice black one to restore instead or I can just shut up and buy a brand new one from Truck shop and smile the whole time shoulda bought that darn deal for wheel, cap, and retainer for 220 a few weekends ago :dohh::banghead:
http://i1111.photobucket.com/albums/...NewType525.jpg

LakeAnna 02-07-2013 05:38 AM

Re: 1972 Chevy p/u NewType Build
 
Quote:

Originally Posted by NewType72 (Post 5862112)
Finally an update from me been meaning to for the past few days but I guess it was still in development anyway here goes.

I was able to finally put my brackets onto my newly polished outer Grille shell so she certainly looks perty now just waiting for my inner to be resprayed since I sanded it down a bit going metallic silver same paint as my wood bed slats just wont be shiny so no clear for that. Was thinking about writing up a full how-to on riveting it together when it's pulled apart since I found nothing on the site that supports putting new ones or re-done grille's back together pretty straightforward but wanted to throw my twist into it thoughts??

To my knowledge my tailgate is on it's way to having some sealer on it by sunday or possibly late Saturday night I'll be grabbing pictures tmrw of that process. Just got my factory assembly manual so I'm going to look for the exact hole locations for the the rear trim on the gate and bezels.

Now here's the goodies I got a cigarette lighter assembly since mine was missing and I like the fact that most of my truck works now so I'm buttoning up the last few things on it per say the factory steering wheel I just bought to restore next week along with factory door panel inserts (going black on these to see what they look like in my interior chrome trim) and also still looking for thee best headliner to put into this durn roof of mine since I have the dimensions and trim to do so now.

Minor stuff I finally changed my fuel filter to a visible to see if gunk is getting to the carb thankfully she's clean so far and also replaced all of my plugs since well the pictures says a thousand words.

Thanks for looking in I'll keep in touch through the weekend if possible and should really have some interesting stuff by next week or so :)

http://i1111.photobucket.com/albums/...NewType520.jpg
http://i1111.photobucket.com/albums/...NewType519.jpg
http://i1111.photobucket.com/albums/...NewType521.jpg
http://i1111.photobucket.com/albums/...d/NewType5.jpg
http://i1111.photobucket.com/albums/...d/NewType3.jpg
http://i1111.photobucket.com/albums/...NewType523.jpg

Nice job on the grille! I worked on mine for 2 days and finally had to go with a repop. I have inserts off my 72 that I need to do something with... hmmm

NewType72 02-07-2013 06:15 AM

Re: 1972 Chevy p/u NewType Build
 
Thank you it was a breeze really just had to have a grinder drill dremel would have been nice and rivet gun. I'm excited to see how my inserts look once on ill be cleaning up my panels as well to darken the black they have
Posted via Mobile Device

shawno72 02-07-2013 08:16 AM

Re: 1972 Chevy p/u NewType Build
 
I know your pain on buying the steering wheel. I saw the comfort grip out there in Turlock and I wanted so bad.......but I decided to wait. :(

NewType72 02-07-2013 11:11 AM

Re: 1972 Chevy p/u NewType Build
 
Yeah it's killin me maybe ill pick it up next swap meet wherever they're at
Posted via Mobile Device

shawno72 02-07-2013 11:16 AM

Re: 1972 Chevy p/u NewType Build
 
They might be at good guys in Pleasanton next month.
Posted via Mobile Device

NewType72 02-07-2013 11:39 AM

Re: 1972 Chevy p/u NewType Build
 
Pomona, CA January 13
Turlock, CA January 26-27
Puyallup, WA February
Puyallup, WA February
Pomona, CA March 3
Portland, OR April 5-7
Pomona, CA April 14
Charlotte, NC April 4-6
Carlisle, PA "Spring" (Truck Shop only) April 24-27
Fort Worth, TX. "Pate" April 25-27
Pomona, CA June 2
Carlisle, PA. (Truck Nationals) August 2-3
Reno, NV. (Hot August Nights) August 8-10
Pomona, CA August 11
Charlotte, NC September 19-21
Carlisle, PA. "Fall" October 2-5
Pomona, CA October 20
Moultrie, GA November
Pomona, CA December 8

Nope looks like they're nixing Pleasanton this year dangit I usually go to that one was even thinking of driving the truck this year to at least one of the Goodguy's events

shawno72 02-07-2013 12:43 PM

Re: 1972 Chevy p/u NewType Build
 
Bummer

NewType72 02-07-2013 12:44 PM

Re: 1972 Chevy p/u NewType Build
 
Also looked the good guys events first one is in March so ill be hankering for some swap parts by then :lol:
Posted via Mobile Device

project 67 sub 02-07-2013 02:10 PM

Re: 1972 Chevy p/u NewType Build
 
door panel insert are looking good bro :D

NewType72 02-07-2013 02:40 PM

Re: 1972 Chevy p/u NewType Build
 
Thank you can't wait to see my polished trim on them withe the silver embossed stripe
Posted via Mobile Device

NewType72 02-08-2013 03:19 AM

Re: 1972 Chevy p/u NewType Build
 
Polished trim is done now looks amazing but I won't put it together until my silver stripe is done so with that tmrw should be the day they are finished but I'll take apart the panels over the weekend

Also got a present from Eastwood today in a repair kit for my recently purchased steering wheel. Guess I'll give it a go since ive committed this far into this wheel hopefully it'll turn out good or at least decent enough for now until I get bored with it :haha:

project 67 sub 02-08-2013 04:43 AM

Re: 1972 Chevy p/u NewType Build
 
Lol. nice, should turn out just fine like everything else has ;)
Posted via Mobile Device

NewType72 02-08-2013 11:22 AM

Re: 1972 Chevy p/u NewType Build
 
That would be awesome if it did it'll Need quite a bit of tlc so we shall see
Posted via Mobile Device

NewType72 02-09-2013 04:05 AM

Re: 1972 Chevy p/u NewType Build
 
Some lovely events of the evening :)

http://i1111.photobucket.com/albums/...wType525-1.jpg
http://i1111.photobucket.com/albums/...NewType527.jpg

guess I'll be searching for parts early in the morning :(

TchncnDen 02-09-2013 11:27 AM

Re: 1972 Chevy p/u NewType Build
 
I haven't seen a rocker arm do that before. Make sure you turn the motor over by hand before you try to start it after you've replaced those parts. I would think the valve had to touch the piston for that to happen, but if you're lucky maybe just years of friction finally ate through the rocker arm.


All times are GMT -4. The time now is 02:20 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com