The 1947 - Present Chevrolet & GMC Truck Message Board Network - What do stock master cylinder brake lines look like

Page 2 of 2

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - What do stock master cylinder brake lines look like (https://67-72chevytrucks.com/vboard/showthread.php?t=825776)

JPBrecheisen

09-29-2021 08:39 AM

Re: What do stock master cylinder brake lines look like

4 Attachment(s)

Quote:

Originally Posted by drumyn61 (Post 8976969)

This is my balance bar but does the main cable attach to a bracket somewhere between the handle and the balance bar?

Main cable attaches to frame in 2 locations.

1. Rear most flange of left forward can mount.
2. Top of t-case cross member.

Hard to get pictures but hopefully these provide enough detail.

drumyn61

10-02-2021 03:46 PM

Re: What do stock master cylinder brake lines look like

Quote:

Originally Posted by JPBrecheisen (Post 8977799)

Main cable attaches to frame in 2 locations.

1. Rear most flange of left forward can mount.
2. Top of t-case cross member.

Hard to get pictures but hopefully these provide enough detail.

You are such a big help, thank you.

Do you have a picture of 4x4 shifter boots?

JPBrecheisen

10-07-2021 11:34 PM

Re: What do stock master cylinder brake lines look like

Quote:

Originally Posted by drumyn61 (Post 8979227)

You are such a big help, thank you.

Do you have a picture of 4x4 shifter boots?

Mine are not stock.

I use the 67 amd later design for the transmissions and am still working on fitting a permanent solution for the t-case.

Sorry, not much help on that one.

All times are GMT -4. The time now is 03:01 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page