The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 2 of 6

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)

- - CA Parting out 84 Chevy 3/4 ton 4x4* (https://67-72chevytrucks.com/vboard/showthread.php?t=376347)

jchav62

12-16-2009 10:58 AM

Re: Parting out 84 Chevy 3/4 ton 4x4

Quote:

Originally Posted by KrazyRay (Post 3676743)

The carb is a Q jet style. Its relatively new but the PO said that it was too big for a stock 350. I think he said it was 800 but I doubt it is that big. Any ideas to find out size? I will do $100 shipped on that carb and I will verify the running condition when I start up the engine. Thanks, Ray

Thanks for the response Ray. 800 may be a little much, but it sounds right for a Q-jet. Anyhow, I gonna have to pass for now with Christmas and all. I'll check in with after the holidays to see if it's still around.

Thanks again and Merry Christmas.

Sarge261

12-16-2009 01:56 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

Ray,

Thanks for the reply, if you have the hinge let me know and throw it in the box, if not, let me know how you would like payment and I will get it to ya.

Thanks,

Sarge

2badgn

12-16-2009 05:49 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

Quote:

Originally Posted by KrazyRay (Post 3677687)

Yes, the price includes harness and switch. WestButteTruck is first in line. I will check another truck for dome light with harness. If I have one it will be $20 shipped. Thanks, Ray

I am very interested in the interior dome light with the complete harness to the fuse box. My truck is currently at the body shop being restored so time is of the essence! If u locate it, please let me know asap. Thanks. I can do without the cargo light but it would be great to have a dome light as my 84 GMC did not come with one. It only has a light at the bottom that u must operate manually.

Frank
maz18@verizon.net

Scootin 81 C20

12-16-2009 09:05 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

Ok, I'll pass on the gauges as mine all work. I was hoping that one would be a small tach, I'm looking for one if you have one. Still interested in the speaker brackets though.

alf4444

12-16-2009 10:54 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

56" rear springs? How much shipped to 84118?

KrazyRay

12-17-2009 02:25 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

1 Attachment(s)

more pics for 87 Bob.

Sarge261

12-17-2009 03:06 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

If the a pillar trim and the rear cab/b post trim is available how much will that add to the shipping for me. And it looks like I will need the whole glove box to get the hinge?

Thanks,

Sarge

DBLSPRT68

12-17-2009 09:03 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

I'd be interested in the carb also, when you find out if the engine runs or not. Let me know, no hurry. David

KrazyRay

12-18-2009 01:32 AM

Re: Parting out 84 Chevy 3/4 ton 4x4

Quote:

Originally Posted by alf4444 (Post 3678660)

56" rear springs? How much shipped to 84118?

Sorry, the springs went with the back end of the frame.

KrazyRay

12-18-2009 01:39 AM

Re: Parting out 84 Chevy 3/4 ton 4x4

Quote:

Originally Posted by DBLSPRT68 (Post 3680212)

I'd be interested in the carb also, when you find out if the engine runs or not. Let me know, no hurry. David

It might be a couple of weeks before I get the engine going. I will let you know. Thanks, Ray

Scootin 81 C20

12-18-2009 09:04 AM

Re: Parting out 84 Chevy 3/4 ton 4x4

Any news on the speaker brackets?

Thanks
Benjamin.

KrazyRay

12-18-2009 11:46 AM

Re: Parting out 84 Chevy 3/4 ton 4x4

Quote:

Originally Posted by Scootin 81 C20 (Post 3681008)

Any news on the speaker brackets?

Thanks
Benjamin.

I haven't had a chance to pull them, but I'm looking for $5 each plus shipping. Thanks, Ray

Sarge261

12-18-2009 01:53 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

Quote:

Originally Posted by Sarge261 (Post 3679694)

If the a pillar trim and the rear cab/b post trim is available how much will that add to the shipping for me. And it looks like I will need the whole glove box to get the hinge?

Thanks,

Sarge

Hey Ray,

Are these still available as well as the other stuff I asked about...just checking not being pushy. I am in no hurry, just tryin to gather some parts.

Thanks,

Sarge

Scootin 81 C20

12-18-2009 05:30 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

Ok, so about $12-$15?

KrazyRay

12-18-2009 07:53 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

Quote:

Originally Posted by Sarge261 (Post 3681348)

Hey Ray,

Are these still available as well as the other stuff I asked about...just checking not being pushy. I am in no hurry, just tryin to gather some parts.

Thanks,

Sarge

The trim is sold. I'll have to get back with you in a couple of days on the glove box. Some of my parts are several miles away. Thanks, Ray

Sarge261

12-18-2009 08:46 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

No problem Ray,

I will take the trim you already talked to me about...unles it sold, and hopefully your glove box is good...

Take your time I am in no hurry..

Thanks,

Sarge

KrazyRay

12-18-2009 10:41 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

Quote:

Originally Posted by Sarge261 (Post 3681873)

No problem Ray,

I will take the trim you already talked to me about...unles it sold, and hopefully your glove box is good...

Take your time I am in no hurry..

Thanks,

Sarge

The headliner trim is yours. The A pillar etc is gone. Thanks, Ray

KrazyRay

12-18-2009 10:44 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

Quote:

Originally Posted by Scootin 81 C20 (Post 3681603)

Ok, so about $12-$15?

I'm hoping to be able to stuff them in a small flat rate box for $5 unless you have ideas to save on shipping. Thanks, Ray

Scootin 81 C20

12-18-2009 10:53 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

Is that the smallest rate they have? If so, so be it. I don't really have any ideas unless you can think of anything else I could use or need to make the shipping worth it.

Sarge261

12-20-2009 07:29 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

Quote:

Originally Posted by KrazyRay (Post 3682029)

The headliner trim is yours. The A pillar etc is gone. Thanks, Ray

Thanks Ray,

Let me know how you would like payment (pay pal, Check or money order etc.) I will get it out to you...just let meknow the total again and how you want it.

Sarge

Dudewith4x4

12-20-2009 10:41 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

I would buy the gauge holder or what you call the bezel I guess. Also the billet grille.

KrazyRay

12-20-2009 11:29 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

Quote:

Originally Posted by Sarge261 (Post 3679694)

If the a pillar trim and the rear cab/b post trim is available how much will that add to the shipping for me. And it looks like I will need the whole glove box to get the hinge?

Thanks,

Sarge

Yes, the hinge is part of the glove box. I can sell the glove box minus metal lid for $25 shipped. It is hard to find a good hinge...out of 8 trucks, I could find only 2 that haven't split apart yet. It would be better to ship the glove box separate than the trim because it would take a long bulky box to fit both. pm sent. Thanks, Ray

Dudewith4x4

12-20-2009 11:38 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

Hey.. Do you have the bezel still?

KrazyRay

12-20-2009 11:45 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

Quote:

Originally Posted by Dudewith4x4 (Post 3685226)

I would buy the gauge holder or what you call the bezel I guess. Also the billet grille.

The gauge bezel shipped to Mo would be $32 total shipped. The billet grill is a flimsy piece of crap that is bowed in the center. I don't recommend this for anyone. Thanks, Ray

Dudewith4x4

12-20-2009 11:47 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

would you go any cheaper?

All times are GMT -4. The time now is 05:16 PM.

Page 2 of 6

Show 40 post(s) from this thread on one page