The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Restoring Rusty (https://67-72chevytrucks.com/vboard/showthread.php?t=645440)

y5mgisi 11-15-2014 09:37 PM

Re: Restoring Rusty
 
Subscribed.

Gregski 11-16-2014 10:57 PM

Re: Restoring Rusty - There goes the neighborHOOD
 
2 Attachment(s)
Quote:

Originally Posted by andrewmp6 (Post 6918723)
If you want to knock the surface rust off easy look in to clr.A few people have used clr with good luck. http://67-72chevytrucks.com/vboard/s...d.php?t=447159

Ok Andrew, thanks for the tip, here we go.

I tried the CLR product in its full strength (not diluted with water) on the driver's side of the hood only, as you can see in the after picture Rusty proved to be too tough for this product, as there is no change.

Gregski 11-16-2014 11:18 PM

Re: Restoring Rusty - Gauge Time
 
5 Attachment(s)
curiosity got the best of me and I had to know why my gauges would not light up, why the speedometer/odometer was not working, and why the lenses were so cloudy

after taking apart the fascia of this gauge cluster I seriously considered renaming Rusty to Dusty

and man those six bulbs were expensive to replace it's like $7 bucks fer two of em little rascals, and they still don't light up, lol

Gregski 11-16-2014 11:21 PM

Re: Restoring Rusty
 
again why are these pictures getting uploaded upside down, can somebody help me

I really like this cluster how it's made out of metal and easy to get to, it's interesting how the gauges plug in too, they have screw studs sticking out of the back that slide into these metal acceptors instead of using electronic plugs like modern day vehicles, really cool

I don't recon I am supposed to just slide the speedo out with the cable innerds so I am guessing the speedo cable is broken, maybe someone can comment on that

also which fuse is responsible for the cluster lights?

Gregski 11-16-2014 11:47 PM

Re: Restoring Rusty - Time To Grill
 
5 Attachment(s)
man I was on fire this weekend, got lots done, no kids birthday parties, no soccer, blah blah blah

I guess I'm what you would call an anti bling guy, I don't care too much for stickers or as car people call em decals, or logos or labels or as car people call them badges, Badges? We don't need no stinkin' badges!

So it was time to black out and de badge the grill...

1984 swb chevy 11-17-2014 12:02 AM

Re: Restoring Rusty
 
Not bad. I like the black.

Gregski 11-21-2014 10:27 PM

Re: Restoring Rusty - Gauges Part Duex
 
5 Attachment(s)
after replacing all the light bulbs in the cluster and all 9 fuses in the fuse panel and installing a brand new headlight switch, it was time to yank the printed circuit board

check out my light bulb testing station, a simple 9 volt battery I think is what helped me find the problem...

"just doing the dishes honey, go back to bed!"

Gregski 11-21-2014 10:29 PM

Re: Restoring Rusty
 
fact: washing bits sure makes part numbers easily to see

I talk some more about the gauges in this thread

http://67-72chevytrucks.com/vboard/s...d.php?t=650245

Gregski 11-21-2014 10:35 PM

Re: Restoring Rusty - Dash Pad
 
5 Attachment(s)
do you guys think there is a chance in hell to restore this dash pad or is it too far gone, a new one from LMC Truck is $340 bucks, friggen expensive

Gregski 11-21-2014 10:43 PM

Re: Restoring Rusty - Dusty?
 
3 Attachment(s)
some pics for you of what the dash looked like when I first removed the dash pad, it was late at night so they are not too great, it may have been raining too, but neither snow, nor rain, nor heat, nor gloom of night, nor the winds of change, will stay us from the swift completion of our beloved trucks. Ever. (well something like that)

GMC Guy 11-22-2014 01:16 AM

Re: Restoring Rusty
 
2 Attachment(s)
I dig your style man, and your typing humor! :metal:
I had Rusty's much uglier twin, only used for the cab and a few odds and ends though, parted the rest out. I called him Shrek

Gregski 11-22-2014 02:56 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by GMC Guy (Post 6927813)
I had Rusty's much uglier twin [...] I called him Shrek

No way, too flippin cool !!! They had the same birth mark, on the front fenders LOL

Gregski 11-22-2014 03:05 AM

Re: Restoring Rusty
 
2 Attachment(s)
a bucket of water and some paper towels later and I could almost go for the dash naked like that if it weren't for those two gaping AC holes, well that and the 2 to 3 inch gap all around the gauge cluster

Gregs71 11-22-2014 12:06 PM

Re: Restoring Rusty
 
I think i know that truck if it came out of lodi? I almost bought it. Glad you did because my progress would of been a lot slower.... ;)

GMC Guy 11-22-2014 01:20 PM

Re: Restoring Rusty
 
another Greg... we're multiplying! :lol:

Gregski 11-22-2014 09:09 PM

Re: Restoring Rusty
 
Gregs to the power of three!

73Super8 11-22-2014 10:34 PM

Re: Restoring Rusty
 
Subscribed. Looking good.

greg64 11-22-2014 11:19 PM

Re: Restoring Rusty
 
Well, I've got to reply to that! (Multiple Greg's)

Gregski, I drove my truck for a couple of years without a dash pad.

Gregski 11-23-2014 02:52 AM

Re: Restoring Rusty - Take a Seat
 
3 Attachment(s)
it rained today so I did what I could (gym and a movie, lol), then took the cheap seat cover off and yanked the bench seat out, four bolts easy to get to, one needed a shot of PB Blaster to get out smoothly, my list of the unknowns is getting shorter and shorter, really needed to now what lurks beneath there

Seat has seen better days, LMC Truck has a Vinyl cover for $190 but for now it's standard issue Mexican blanket time

No holes in the floor pan, just surface rust, that is a welcome sight

pulled the plug out of the B pillar I guess it's called and saw threads in there, cool, maybe this is for the shoulder seat belts (score if it is)

Gregski 11-23-2014 03:04 AM

Re: Restoring Rusty - Floor Pans
 
3 Attachment(s)
time to bust out the trusty ol' Shop Vac and you guessed it a bucket of water and yet more paper towels

why do I use paper towels, well cause I don't like dippin a dirty rag back into clean water, so I use a single hefty paper towel piece, wipe something off, go oooogh and toss it in the trash, then rinse, lather, and repeat

flashed 11-23-2014 09:37 AM

Re: Restoring Rusty
 
The threaded hole you found in the pillar is for shoulder belts and you may get lucky and find some in your local junkyard ,I have not been that lucky.

Gregski 11-24-2014 01:11 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by flashed (Post 6929131)
The threaded hole you found in the pillar is for shoulder belts and you may get lucky and find some in your local junkyard ,I have not been that lucky.

Cool thanks, and yup I am heading to Pick N Pull this week to see what I can find, it may be extra tough since I am picky on the interior and want black seat belts, and this was the era of weird interior colors, like blues and reds and tans.

LMC Truck of course has em fer $90 per side, not too bad

SkinnyG 11-24-2014 01:29 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by greg64 (Post 6928831)
Well, I've got to reply to that! (Multiple Greg's)

I will have to as well. That's what the G is, in SkinnyG.

Gregski 11-24-2014 01:45 AM

Re: Restoring Rusty
 
OK, I must admit I tell my kids that GMC stands for Greg M_____'s Car, yes my last name does start with M, but then my smart as 10 year old says, but daddy it's a Truck

Gregski 11-24-2014 01:47 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by SkinnyG (Post 6930433)
I will have to as well. That's what the G is, in SkinnyG.

Nice, welcome!


All times are GMT -4. The time now is 05:47 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com