Re: "The way it is" 67'swb
 

I started to work on the driverside rocker and cab corner tonight. What a pita, nothing would match up and my welding was real bad. I had a lot of blow thrus on the old metal. I had the welder as low as I could go but still get good penatration, I dont know what it was that was causing it. After cutting, bagging and cursing I got everything to match up pretty good. I will still have to fill the extra swiss cheese yet!

Re: "The way it is" 67'swb
 

Looks like it lined up really nice in the end.

Re: "The way it is" 67'swb
 

Well i finally got the bottom of my cab done. I have to clean up some welds on the one cab corner and the footwell panels. The next thing on the ballet is I have 2 spots on the windsheild frame that needs some attention. Hopefully it will not be to bad but it looks like the might have some putty in there. The sandblaster will tell the truth, keep your fingers crossed! Once I get my cab done I am planning on working on getting my wheels powder coated so I can mount them.

Question, what do you guys do for the floor seam at the footwell panel were it is wider and does not touch? The part of the floor at the outside of the cab. I had welded the seem and need to do something with this gap and was wondering what works the best?

Re: "The way it is" 67'swb
 

Good progress.

Re: "The way it is" 67'swb
 

thanks, great progess would be getting the cab painted before the winter!!:metal:

unfortanetly I am not sure that will happen:waah:

Re: "The way it is" 67'swb
 

That's my goal as well....We'll have to see who gets it done first ;)

Re: "The way it is" 67'swb
 

ready, set.....go!

Re: "The way it is" 67'swb
 

wow, you're whipping my butt John...

If I were you i'd tack a filler piece in that area and make it go away, or a pie cut and filler piece...

Re: "The way it is" 67'swb
 

that was what i was thinking but wanted to see what everyone does with it. I have gotten a good bit done and now trying to decide whether to get it blasted then paint it or just do it the hard way and sand it or strip it???

Imagine how many dissapointed freinds I would have if I told them I was having a stripper party;) "sorry thought you knew wht i meant"

Re: "The way it is" 67'swb
 

man u are smokin compared to a lot of us, and you are doing fantastic work ta' boot. keep it up, and don't let a few unsatifactory welds get u down, it happens to all of us at some point in our learning curve, and i am no pro (not even close).

Re: "The way it is" 67'swb
 

thanks loflya, I have come to realize some days you are the dog and others the tree. least with metal you can fix your screw ups!

Re: "The way it is" 67'swb
 

John,
can you clamp that area to draw it closer together. Wehn we did my son's the gap was not that big, but i was able to use a couple of clamps and weld the seam.

Re: "The way it is" 67'swb
 

I had some free time and got one of my wheels out and put it on to check it out. I cant wait to get these baby's coated and on! Also made a throttle return spring, my spring was hitting with the usual lower style bracket so I fab this up.

Re: "The way it is" 67'swb
 

did I hear stripper? just dont mention anything about screwin!

http://comps.fotosearch.com/comp/UNC...~u16165471.jpg

Re: "The way it is" 67'swb
 

not a word!!

Re: "The way it is" 67'swb
 

Nice rims and good job on the return spring.

Re: "The way it is" 67'swb
 

So I had sometime and got the windshield area cleaned up. I knew I would need to do some work but son of a monkey! I will have more time in it than I had hope to have. Also here is a pic of the paint scheme I am playing around with. I like the 2 tone but my family likes just the dark green. What do you guys think?

Re: "The way it is" 67'swb
 

check out the littl dude skiing on the back of the cab there! I had used some stripper in that spot to test it out and that is how it turned out and my son pointed him out to me, pretty funny!

Re: "The way it is" 67'swb
 

Wow, nice work so far Sourkraut. There are alot of guys on this site with skills. The work with the exhaust and crossmember is nice, keep it up.

Re: "The way it is" 67'swb
 

snowboarding rocks!

I don't like the two tone... maybe if it was sage green and tan.. oh wait I wear that everyday!

http://i143.photobucket.com/albums/r...cu_pattern.jpg

Re: "The way it is" 67'swb
 

looking good john....

Re: "The way it is" 67'swb
 

I love going in the garage without intentions of getting a lot done. This is when i get most work done and everything seams to go smoothly, I guess cause I do not have huge expectations. I had gotten 2 of the worst areas of the windshield surround done tonight!:metal:
You can see in 2 of the pics how bad the section I had taken out was.

Re: "The way it is" 67'swb
 

here is the pics

Re: "The way it is" 67'swb
 

Nice repairs....looking good. I like the two tone...very warm colors that look good together.

Re: "The way it is" 67'swb
 

Thanks I am having a hard time with a paint scheme. I dont know whether to do the top of the cab in the sand color or just the grill and the chevy in the tailgate in the sand and the rest green??