Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
What comes with the efi tanks?
R/ |
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Quote:
Pumps used are the walbro 255lph |
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
How many would we need for a group buy and what type of prices are you thinking?
Also, do you have a supplier for the 90 ohm sending unit where you could add that to the cost or do we just purchase that on our own? |
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
1 Attachment(s)
FYI the first tanks is mine that we did from an earlier group buy. I made a powerpoint slide with all the dimensions. (I attached the file, simply download and open)
The sizes could be tweeked a little to fit your frame... |
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Quote:
well lets see how many are interested and ill see what i can do.... BUMP THIS THREAD IF YOUR INTERESTED!!! if we can get a decent number ill work an even better price than what i already offer which has not been beat yet. the sending units will be up to you to purchase on your own. |
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
I will commit on a EFI tank, for the group buy (if it happens).
I need to measure a few things and decide on the fill neck. which walbro pump specifically you adding? Can you put a GSS342 (this is a higher pressure version) ? Andy |
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Quote:
THAT'S 1... I CAN HEAR THE PRICE COMING DOWN ALREADY. |
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
I am in pending final pricing and if I can get the inlet turned 90 degrees to allow me to set up my fill in the stake pocket. Won't need a cap.
|
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Quote:
THATS 2.... KEEP IN MIND IM THE MANUFACTURER SO WE HAVE THE FLEXIBILITY TO MAKE MINOR CHANGES AS NEEDED. YOU WILL NOT GET A BETTER DEAL ANYWHERE. Try to let me know which tank you are in for. the EFI or the STANDARD we will sort out the small details like fillers and fitting sizes later. |
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Dave..
I know your deal doesn't include a sending unit but I think it would be better if you had an exact unit to recommend to the buyer, or included one for the additional cost. The 67-72 take a 90 ohm but I think 66 and older take a different style. (30 ohm?) This would make sure that they purchased one that fits your flange perfectly, the one I purchased from JC Whitney was slightly off from your flange, the holes were. |
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Quote:
-Greg |
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
I'd be interested in a standard tank.
|
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Quote:
|
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
How are you attaching the tank to the frame - are you drilling the frame?
|
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Quote:
i would like to supply the senders or at-least give information on the correct ones for your applications. truth is i have no idea what you require either. The only senders i am familiar with are 0-90 ohm and 30-240 ohm heres a jc whitney SunPro 33-240 ohm adjustable universal sender http://www.jcwhitney.com/jcwhitney/p...questid=200348 heres a 0-90 ohm sender from e-guages http://www.egauges.com/vdo_indS.asp?...90ohms&PN=SN38 both of those senders will fit my flange. also you can always have the sender drop shipped to me and ill install for free. as for the sunpro sender. every one that i have ever installed or bought has fit perfect. My sending unit flange's bolt pattern only goes one way. all aftermarket senders with a 5 bolt pattern will fit it this flange as it is a US Standard pattern. I will attempt to do a video here in the next couple days on installing a sender. |
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Quote:
|
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Quote:
Our Quality Control processes have evolved a ton since then. I have added another inspection into our fabrication process which addresses metal shavings in the tank and metal shavings around the openings. We have also began to practice and adopt ISO Quality Standards. |
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Quote:
|
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
I am using existing holes in the frame to mount mine, since dave sends the flagnes "undrilled" as he stated you can make any adjustments and mount it exatly where you want. You might have to drill a new set of holes if you want extra support, really depends on your frame though since they are all a little different (LWB, SWB, 2WD, 4WD etc..)
I also plan on adding rubber spacers to isolate any vibrations that could cause stress cracks over time. |
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Hey fellas, count me in on the group buy. My frame will be powder coated soon and will be screaming for one of these upon return!
|
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Standard, non EFI tank for me please. Thanks.
|
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Quote:
|
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Quote:
OK normal advertised price for standard non EFI tanks are $388 shipped to your door and EFI tanks are $649.00 shipped to your door. 2009 BOYD GROUP BUY ONLY PRICE STANDARD TANKS 299.00 + 39 SHIPPING EFI TANKS $499.00 + 39 SHIPPING |
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Awesome deal! What's the next step?
|
Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Quick question...how much gap between the top of the tank and the bed cross sill ( meaning can the side tabs be moved so that the tank sits a little higher and tucks even more up under the truck without coming into clearance issues with a bed crossmember)
|
All times are GMT -4. The time now is 10:07 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com