Re: 72 K20 Cheyenne Super Build
1 Attachment(s)
Quote:
Quote:
The 700r4 arrived - here's a shot of the engine in place with relocated motor mounts to accommodate the longer length vs. the TH350. It'll be nice having some space between the HEI and the firewall. Anyone have this set up in a 4x4? I'm wondering if I should stick with the 4x4 fan shroud or install a 2wd shroud now that the motor is closer to the radiator. |
Re: 72 K20 Cheyenne Super Build
4 Attachment(s)
Here are some recent pics of the finished job on the inner cab repair and of the bed. The bed floor is essentially dent free. I opted to paint the bed floor rather than apply a liner. Again, gotta see more orange! Leaning toward single stage Imron paint rather than two-stage but welcome anyone's 2-cents on this.
|
Re: 72 K20 Cheyenne Super Build
metalwork is looking great. why not leave the engine and move the tranny crossmember back to accommodate the added length?
Ryan |
Re: 72 K20 Cheyenne Super Build
1 Attachment(s)
Ryan - i thought about that too. Seems like most guys have gone the route I did in order to spare shortening the drive lines and moving the other cross member. Seemed like the cleanest way to go and gives more room for the HEI (not that that's a problem I'm aware of). My one concern is how much clearance will I now have between the oil pan and the front diff but I don't expect to really off road the K20 once the build is complete. Nevertheless, here's me stuck on a hill this weekend in my 4Runner close to rolling when I tackled a hill NOT in 4 low. Doh! That was close...
|
Re: 72 K20 Cheyenne Super Build
Hey Pete.......I bet you are chompin' at the bit to get that truck going, it's looking great!
|
Re: 72 K20 Cheyenne Super Build
Nice truck!
Posted via Mobile Device |
Re: 72 K20 Cheyenne Super Build
Can't wait till it's don! Thanks guys!
|
Re: 72 K20 Cheyenne Super Build
5 Attachment(s)
More progress. Most sheet metal is primed. Frame is getting blasted.
Any votes for single stage vs. clear coat? Also, need help with pics of G60 aux leaf springs per this post: http://67-72chevytrucks.com/vboard/s...d.php?t=539277. Thanks for looking! |
Re: 72 K20 Cheyenne Super Build
4 Attachment(s)
more...need the firewall hole for the tach harness grommet.
|
Re: 72 K20 Cheyenne Super Build
Just read your build. Very nice. I vote for single stage in the paint department...
|
Re: 72 K20 Cheyenne Super Build
2 Attachment(s)
Frame is back. Pics show the front hooks in place and new frame brackets for the rear hooks.
|
Re: 72 K20 Cheyenne Super Build
3 Attachment(s)
Frame is painted (now dusty) and axles are off for new seals, etc. The HO52 will get a NoSPIN and the front axle a set of OEM Spicer hubs.
|
Re: 72 K20 Cheyenne Super Build
Going to be a nice truck when its done
|
Re: 72 K20 Cheyenne Super Build
Coming along very nice DeadheadNM! Can't wait to see it with paint on it.
|
Re: 72 K20 Cheyenne Super Build
Looking good Pete.
|
Re: 72 K20 Cheyenne Super Build
1 Attachment(s)
Axles are back on the frame. Spicer's look good. Will try to upload more pics soon. Can anyone recommend a decent set of shocks? May just go with a set of Napa's finest....
|
Re: 72 K20 Cheyenne Super Build
bilstein makes great shocks.
that chassis looks great! ryan |
Re: 72 K20 Cheyenne Super Build
Looking good Pete!........I second the bilsteins.... I run the 5000's on my dodge.....I would do the yellow's though for a softer ride....mine are a bit stiff.
ShockWarehouse.com has pretty good pricing and outstanding customer service. |
Re: 72 K20 Cheyenne Super Build
Looking good keep it up.
|
Re: 72 K20 Cheyenne Super Build
Pete,
Wish my chassis was this far! Looking good. Do you have a pic of the bowtie 700R4? Does it look new OEM or is it painted? Tell me more about them, I am considering a 700R4 for my K20 and have also read its most practical to move the engine mounts ahead one set of holes, as you have done. |
Re: 72 K20 Cheyenne Super Build
Quote:
The owner of BTO had a 67-72 K20 and did the same swap. He ensured the correct output shaft was added, dialed it in for the model Q-jet I'm using, and got all necessary linkage. He knew exactly what had to be done. Moving the engine mounts forward was no big deal. I'm not sure how the shroud will shake out with the change. May have to use a shorter 2wd shroud but we'll see. As far as any changes needed for the speedo cable, linkage, etc related to the engine move I'll keep you posted as the build progresses. Hope this helps! |
Re: 72 K20 Cheyenne Super Build
Quick build so far!
|
Re: 72 K20 Cheyenne Super Build
Thats going to be a Beautiful truck when done! everything looks Top Notch! I like the fab work on your rear hooks...keep up the good work Pete
|
Re: 72 K20 Cheyenne Super Build
Thanks fellas! Could not do it without the help and encouragement of the community here.
|
Re: 72 K20 Cheyenne Super Build
another vote for Bilstein...
keep it up, it looks great so far |
All times are GMT -4. The time now is 09:18 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com