What’s your hub center to fender height? Trying to figure out if mine was lowered 3/4 or 4/6. Wanna lower her another 1” to fill the gap a bit with my new 22” on 30series rubber
Posted via Mobile Device

Re: How about some pics of Static Dropped C-10's
 

My 73

Clipped 2 coils
And welded new axle pads on the bottom of a 3.25 tube 9 inch

No notch.

Re: How about some pics of Static Dropped C-10's
 

This is long overdue but I finally installed the ECE suspension I've had in the garage for about 4 years :lol::lol: Here are some details:

ECE 4.5/6 drop with drum to disc conversion with (2.5" drop spindles and 2" drop springs) Rear has 6" drop springs, shock relocator kit, and super track bar kit. It's frustrating that they are unavailable for support as a number of small parts were missing (banjo bolts, prop valve mounting kit and lines, dust caps, etc.).

Tires are 255/55R18. I have since put different Nitto NT421Q tires on but no pictures yet. Wheels are Eagle Alloy 146s I'm guessing BS is 4.5 or 5.5. While the tires fit with very little clearance, I'd suggest a shorter tire.

Overall it's riding really well but the brakes are dragging so I'll need to figure that one out.

https://i.imgur.com/XJ52ekG.jpg

https://i.imgur.com/kjfh6ej.jpg

Re: How about some pics of Static Dropped C-10's
 

Forgot to add my old Farmer Truck here. ("Betty") :lol: :smoke:

6" F ~ 3" Belltech Spindles, 1.5 rounds cut off stock coils

9" R ~ Is a TinWorks Rear Axle Flip / C-Notch Combo Kit

Re: How about some pics of Static Dropped C-10's
 

5.5” front & 7” rear

Re: How about some pics of Static Dropped C-10's
 

not pretty...yet...lol

Re: How about some pics of Static Dropped C-10's
 

Maybe got a little carried away but I dig how it turned out. Cheap and low. Jaguar ifs up front, explorer 8.8 and suspension out back. 20x9.5 and 20x11.5. Rides great because both suspensions are totally stock.

Re: How about some pics of Static Dropped C-10's
 

Hey cornfed, I like the interesting route you went with the suspension.
Do you have a build thread or? I can't view the pics in the link.

Re: How about some pics of Static Dropped C-10's
 

Nice, and agree: need more pics!

Re: How about some pics of Static Dropped C-10's
 

4.5/6+. Spindles and springs up front flipped axle in the back.

Re: How about some pics of Static Dropped C-10's
 

Picked this up 2 weeks ago

Went to town on it

2.5 CCP Drop Spindles

3-5 Coils

15" Wheel Vintiques with 205/75 Cokers

Gonna add a 2" block and add a bolt on notch on the rear to get it a bit more level

Re: How about some pics of Static Dropped C-10's
 

This is Old Rusty, 2.5" front and 4" rear.

Re: How about some pics of Static Dropped C-10's
 

Did u do front spindle and rear spring drop or front and rear spring.

Re: How about some pics of Static Dropped C-10's
 

Already Gone,
If that question was directed at me: Front was done with 2.5" drop spindles along with new stock height springs. Rear was done with progressive rate 4" springs only.