Re: "Jake" the 84 to 74 crewcab
Quote:
Finding new builds is not crazy difficult. I reach out to close friends that I know are always searching. Thats how i found this one in my own back yard. |
Re: "Jake" the 84 to 74 crewcab
1 Attachment(s)
My weekend was spent working on Elwood. I recently blew a water pump gasket a saturated the entire underside of the hood with antifreeze. I will add updates here- Elwood
I did take Jake to the local Trucks and Coffee Sunday morning. I met my painter there and he gave the truck a good look to determine a plan of action. I also picked up a set of 73-80 front bumper brackets for Jake while I was out. That officially made it a business trip. |
Re: "Jake" the 84 to 74 crewcab
I knew you where working in this "new" addition, but just found the thread today. The rendering you posted, is there a full 3/4 view in that same line drawing available from him?
|
Re: "Jake" the 84 to 74 crewcab
Looks great Ken!!! It's like you were reading my mind with your plans for Jake. Like I said in a message a while back, I've wanted to build a CCSB Squarebody ever since the first one I spied a few years ago. Unsurprisingly, I'm officially following :cool:
|
Re: "Jake" the 84 to 74 crewcab
2 Attachment(s)
Quote:
|
Re: "Jake" the 84 to 74 crewcab
What's the suspension plan?
|
Re: "Jake" the 84 to 74 crewcab
Quote:
|
Re: "Jake" the 84 to 74 crewcab
Quote:
|
Re: "Jake" the 84 to 74 crewcab
2 Attachment(s)
I spent the week thrashing on Elwood getting ready for the C10 Nationals. This left almost no time to work on Jake. I did manage to source another piece of the puzzle. I had a buddy North of Dallas that had an original 73 hood. It was on a GMC Jimmy that he is building, but hes going with a cowl hood. I swung by on my way home from the show and loaded it up in the back of Elwood. I now have a all the sheetmetal to build a 74 front in with OEM parts.
|
Re: "Jake" the 84 to 74 crewcab
That's a good sized piece of the puzzle figured out :cool:
|
Re: "Jake" the 84 to 74 crewcab
Quote:
|
Re: "Jake" the 84 to 74 crewcab
Oh, another build to follow with great features and fine attention to detail! I'm excited.
Preliminary questions that I don't think have been asked or already answered: Keeping it 8-lug? Interior/exterior color(s), single tone, two-tone, deluxe two-tone? (You mentioned an early pattern to the seats, I love the green houndstooth they used to use.;)) Have any of your trucks had a wrapped dash? Are you a fan of that look? The possibilities with stitching are intriguing. With your use of Mike Losh's tubs on Elwood, would you consider a set of his buddy buckets for Jake? Possible Vortec 454 you say, backed by a 4L80E? I haven't researched the newer stuff, would it be possible to use one of the newer 6-speed autos? |
Re: "Jake" the 84 to 74 crewcab
Quote:
Jake would be awesome with a 6.2. I have a Yukon Denali with that motor. I sometimes have day dreams of something happing to it and I get to buy it back from the insurance company for the drive train. :lol: |
Re: "Jake" the 84 to 74 crewcab
Quote:
Suspension- I have given it lots of thought and the 14 bolt C20 suspension limits what aftermarket products I can use. I plan to go with a 89-91 10 bolt with 3.73 gears. Its not as HD as the 14 bolt but it will do everything I need it to and gives me an unlimited selection in wheel styles. I will be working with RideTech again. Its possible we may update the early style 4 link, and E3 system. I will probably run 1/4" valves rather than the Big Red 3/8" I have used in the past. Interior- I plan to run a stock styled interior. I am working with Mike Losh to design a seat bracket so his Buddy Bucket will fit a 73-87 floor. I havent decided what insert material I will use yet, but I plan for a retro style two tone to emulate the 1974 era. No, I'm not a big fan of wrapped or stitched dashes. I have an NOS pad that I will dye to match. Motor- I am still looking at the 8.1 with a 4l80 or 4l60. I love the 6.2s as well, but they are expensive right now. I have even considered a 7.4 Vortec as an option. The deciding factor will be what I find as a fair priced donor. Color- I'm not a big fan of color changes unless you take a truck apart completely. In those case "most" of the truck will be apart, but not "all" of it. Consequently, I will stick with the factory red thats on it now. It will have a secondary color, but it will not be white like it is now. Bed- I am looking at adding a wood floor. If I do, it will probably be stained to match the body color. The possibility of a tilt floor panel has been considered as well. I have a gazillion other ideas but we will see if time and money allow those to happen. |
Re: "Jake" the 84 to 74 crewcab
Quote:
I too have had a few 6.2's and they are an excellent motor with no mods. Thats why I want one, and so does everyone else. They are 3-4x the cost of a 5.3 or 6.0. |
Re: "Jake" the 84 to 74 crewcab
Quote:
|
Re: "Jake" the 84 to 74 crewcab
Quote:
|
Re: "Jake" the 84 to 74 crewcab
Can’t belive I missed this! Sub’d
|
Re: "Jake" the 84 to 74 crewcab
Quote:
|
Re: "Jake" the 84 to 74 crewcab
Quote:
|
Re: "Jake" the 84 to 74 crewcab
Quote:
I was just taking a stab when I asked about the buddy buckets! :lol: That is GREAT that you are working with Mike on adapting them to Jake. I'm excited to see what the interior turns out like. The bed sounds classy, particularly the flooring stained to match body color. Would it serve any purpose for you to consider adding LED cargo lighting similar to the recently available factory option? |
Re: "Jake" the 84 to 74 crewcab
Quote:
|
Re: "Jake" the 84 to 74 crewcab
Quote:
Beyond that, its wheel selection. Yes, I know the option for 8 lug styles has increased considerably. Unfortuanly, what available is not he look i'm after. Quote:
Quote:
|
Re: "Jake" the 84 to 74 crewcab
Quote:
The most economical route would be to update the existing 454 with an aftermarket EFI. Adding better heads, cam, and intake would get decent mileage and performance. That would require an OD transmission which pushes the cost closer to a 6.2 conversion price. My current 454, TH400 combo seems to be in usable condition. The carb needs attention, but in general it seems solid enough to consider a top end build. I need to run a compression check to verify that its still solid. If so, I may keep it with updates for now. |
Re: "Jake" the 84 to 74 crewcab
1 Attachment(s)
I spent the last couple of weeks working in my yard. We have family coming to stay next month and the yard needed major attention. Consequently my shop time has been limited. Friday and Saturday I busted ass on my yard so Sunday was my truck day. my shop still needs a total clean up day, but I wanted some quality time with Jake. My compromise was to clean and organize the parts I needed for Jake.
I pulled him outside and emptied the bed and back of the cab. This was what I had stored and does not include the hood and two doors not pictured. |
All times are GMT -4. The time now is 01:47 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com