Re: 68 aka "Chained in Porterbuilt Prison"
The flat area right below the dash "pad" will have custom billet inserts made by these guys http://www.petesfab.com/
Try to fab ac vents today-remove original key hole-wiper hole next to cluster-that curved piece in center of dash(bottom) will house a Doc's Kustom piece for controls and a vintage air controller Really have not decided on "tunes " yet---Anybody lead me 2 a radio that I can hide with only remote control fob?? LIke to keep dash as slick as possible......jim |
Re: 68 aka "Chained in Porterbuilt Prison"
Turned out great!!! Can't wait to see more!
Nate Posted via Mobile Device |
Re: 68 aka "Chained in Porterbuilt Prison"
a slick little idea for a radio, run an ipod then feed that to an amp which feed the speakers. i like this idea because everything can be under the seat, and ipod can sit on the seat. keeps the dash clean and everthing out of sight. i think its rockford that has pretty small amps now, i don't think they're larger than 6''.
|
Re: 68 aka "Chained in Porterbuilt Prison"
Quote:
|
Re: 68 aka "Chained in Porterbuilt Prison"
sounds like you know what to do!!
|
Re: 68 aka "Chained in Porterbuilt Prison"
Your dash innovation is awesome! Your cab looks great as well! Keep at it.
|
Re: 68 aka "Chained in Porterbuilt Prison"
Very nice work. Congrats!
Posted via Mobile Device |
Re: 68 aka "Chained in Porterbuilt Prison"
Looks really good. Like your direction on this build.
Keep up the posts. |
Re: 68 aka "Chained in Porterbuilt Prison"
Looking good man. Subscribed to this one.
|
Re: 68 aka "Chained in Porterbuilt Prison"
Just ordered vintage air compac unit--billet specialties vents--billet controls-will show pics this wkend of placement --4 vents ............probably 3 more wks on dash then i will switch to "Nates Stuff" ......lol......It's killing me looking at a table full of parts but once I get on something try not to get sidetracked..........but we all no how that can be...........jim
|
Re: 68 aka "Chained in Porterbuilt Prison"
5 Attachment(s)
After second round of skimming dash--Took a break and engineered the vintage air "compact" unit --plenty of air with this unit---1st had to cut out the blower motor "boot" where cowl and kick panel meet (1st pic) --then weld in a "shoe" to force any water from cowl drain "shoot" to discharge to bottom and then out---Upper cowl will be smooth so there will be minimal water in cowl area to drain--I am reworking the top of "shoot" to make sure that's where the water goes
Mounted air box so the rounded fan motor side fits snuggly into curved area in that 1st & 2nd pic---almost made for it! Notice air box does not extend in the open end of kick panel--will install a panel to hide rest of opening ---I'm running all 4 hoses out that end to a bulkhead fitting mounted in the flat bottom of cowl end--all hidden in the end by inner fender and fender--having that kick panel opening like it is I can get to top side of bulkhead thru there if needed!! everyone have a good week....dash pics with ac vents and controls at end of week!!.............jim |
Re: 68 aka "Chained in Porterbuilt Prison"
nice work
|
Re: 68 aka "Chained in Porterbuilt Prison"
Nice work on the dash. Can't wait to see more pics.
|
Re: 68 aka "Chained in Porterbuilt Prison"
WOW that tucks it in very nicely !! what will prevent the water from coming in the cab under the cowl vent, is it boxed in underneath the cowl panel ?
|
Re: 68 aka "Chained in Porterbuilt Prison"
WOW!
awesome work on the dash. unfortunately im not going to be able to use the dash out of the 59 truck cause of the angle of the steering column and stuff so im going to be doing this dash now (which was my VERY close 2nd choice so im happy) what sucks is a guy was sellin one of these dashes at the humble swap meet last month for about $100!! and its good to know this dash can be done and i now have some reference pics. thanks for the update. sweet build. you think you could get some pics of the top of the dash? like how it fits up against the windshield and closer pics of how you connected it to the post? thanks |
Re: 68 aka "Chained in Porterbuilt Prison"
Cool idea on getting everything hidden under there!
|
Re: 68 aka "Chained in Porterbuilt Prison"
Quote:
water coming out of chute is going out were it was intended!...jim |
Re: 68 aka "Chained in Porterbuilt Prison"
Quote:
|
Re: 68 aka "Chained in Porterbuilt Prison"
Quote:
Think through everything U want"under" the dash before putting it permanent--makes it so much easier-that's why I bought ac and fabbed it 1st--Now defroster ducts,etc...............jim If u go to super chevy saturday--look me up-in the swapmeet area with 67-72 parts and advertising Conroe |
Re: 68 aka "Chained in Porterbuilt Prison"
Oh ok those are probably all very good ideas, i was lookin between your pics and the dash i have now and i think i may still be able to use it after seeing how high you have yours setting at. and Ok cool, i plan on bein there!
Posted via Mobile Device |
Re: 68 aka "Chained in Porterbuilt Prison"
Quote:
|
Re: 68 aka "Chained in Porterbuilt Prison"
Quote:
Lookin forward to your next update Posted via Mobile Device |
Re: 68 aka "Chained in Porterbuilt Prison"
Quote:
|
Re: 68 aka "Chained in Porterbuilt Prison"
Cool !!
|
Re: 68 aka "Chained in Porterbuilt Prison"
Boy has some skills
|
All times are GMT -4. The time now is 12:10 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com