Re: 71 C10 project "Double Tap"
Bad ass build! I'm creepin on this one for sure..
Posted via Mobile Device |
Re: 71 C10 project "Double Tap"
Got all the final details figured out tonight and spent the remainder of the evening cleaning and ripping the frame apart and rolled it over to get the under side welded up. Will have pictures updated tomorrow!!!
Posted via Mobile Device |
Re: 71 C10 project "Double Tap"
4 Attachment(s)
Ran out of welding wire so all I have is destruction pictures. You can see I also started smoothing out the center section where I tied the rails together for the swb conversion.
|
Re: 71 C10 project "Double Tap"
Looking great !
Posted via Mobile Device |
Re: 71 C10 project "Double Tap"
Quote:
|
Re: 71 C10 project "Double Tap"
I've been grinding and welding like a mad man. So I promise I will have updates this evening and tomorrow.
|
Re: 71 C10 project "Double Tap"
4 Attachment(s)
Got a little grinding and polishing to do but its coming together.
|
Re: 71 C10 project "Double Tap"
Been sick this week so that's why updates have been minimal. I did get one rail smoothed out and looks good but not much else done. Grinding isn't that much fun anyways much less when your sick. Hopefully this week will go better.
Posted via Mobile Device |
Re: 71 C10 project "Double Tap"
Nice work, I've got a lwb 2wd next to my house for parts. Wish I could do something like this with it
Posted via Mobile Device |
Re: 71 C10 project "Double Tap"
You caught my attention. Now I'm hooked.
Posted via Mobile Device |
Re: 71 C10 project "Double Tap"
Hello neighbor nice build there looks like your not afraid of work lol be glad to see it running around sometime.
|
Re: 71 C10 project "Double Tap"
Thanks everyone. Sorry for the delays theres just no good excuse for my slacking. Updates will be flowing in this week.
|
Re: 71 C10 project "Double Tap"
Quote:
|
Re: 71 C10 project "Double Tap"
3 Attachment(s)
still need to fine sand the metal
|
Re: 71 C10 project "Double Tap"
4 Attachment(s)
got a little welding fill left to do
|
Re: 71 C10 project "Double Tap"
coming along real well.. rails look good
|
Re: 71 C10 project "Double Tap"
3 Attachment(s)
Doesn't look like much done but I grinded and welded for 6 hours straight today and Im finally almost done with the bottom of one rail. Its starting seem silly to be so maticulous with a frame that will sit on the ground and no one will probably ever see but I guess it helps me sleep at night knowing its the right thing to do.
|
Re: 71 C10 project "Double Tap"
3 Attachment(s)
some more
|
Re: 71 C10 project "Double Tap"
Nice finish work
Posted via Mobile Device |
Re: 71 C10 project "Double Tap"
looking good!
|
Re: 71 C10 project "Double Tap"
Quote:
Quote:
Posted via Mobile Device |
Re: 71 C10 project "Double Tap"
Nice work moveing along to
|
Re: 71 C10 project "Double Tap"
Quote:
Posted via Mobile Device |
Re: 71 C10 project "Double Tap"
4 Attachment(s)
Well, I got the bottom of the frame done and it flipped back over. Also got the passenger bag plates figured out but ran out of gas in the welder so I did what I could to mock up the front clip with the passenger suspension installed to check clearence and to see if I needed to narrow the arms. Looks like I might raise the upper arms a little to correct some camber but I'm over all pleased with everything.
Got the axle tabs all welded up and added some lower tab bracing but with a little custom touch. |
Re: 71 C10 project "Double Tap"
3 Attachment(s)
some money shots
|
All times are GMT -4. The time now is 12:35 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com