Re: My 58 Brookwood
2 Attachment(s)
Today we put on the collector’s and welded the O2 bungs
We also created a firewall pass through for the Wiring harness. |
Re: My 58 Brookwood
3 Attachment(s)
The new alternator came in
The new O2's came in And we finally pulled that lifting plate off and put the Valley cover back on |
Re: My 58 Brookwood
2 Attachment(s)
Here is that 600hp LS3 nestled in the engine bay!
Here’s a view From the bottom of That 4L80E and how well it Fits. |
Re: My 58 Brookwood
Looking awesome. I like those valve covers on the LS3. A bit of old school flare with the fins. Where did you find them? Is the harness a holley terminator?
|
Re: My 58 Brookwood
Nope, bought it one eBay. $450
|
Re: My 58 Brookwood
3 Attachment(s)
we put 2 3/8 nipples in the bottom for the brake booster and the PCV
|
Re: My 58 Brookwood
4 Attachment(s)
Here’s the overview of how the engine looks in the bay
so we cut the tunnel 7” wide to facilitate the installation of our 12” Lokar tail shaft mounted shifter |
Re: My 58 Brookwood
4 Attachment(s)
We got the right MAP sensor in today and mounted it
I think it looks clean on the back of the intake Here’s that LS3 in the engine bay. Just can’t get enough of that sick looking MF'er! |
Re: My 58 Brookwood
4 Attachment(s)
We put the 3/8 hoses on the intake
Routed the steam tubes This is the engine with all the Wiring ran and plugged in |
Re: My 58 Brookwood
Looking good!
|
Re: My 58 Brookwood
1 Attachment(s)
Thank you
Today we modified the Transmission crossmember to slide 8” back for our 4L80E |
Re: My 58 Brookwood
It's coming along nicely. Keep plugging away!
|
Re: My 58 Brookwood
We are only able to work on it about an hour a day.
|
All times are GMT -4. The time now is 12:57 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com