Re: 67-72 cab corner 6x9 speaker brackets
Pm sent
|
Re: 67-72 cab corner 6x9 speaker brackets
1 Attachment(s)
Went to install my brackets and realized the small floor brackets are different-one has elongated slotted holes which match up with the 2 holes in the bottom of the main speaker bracket- and the other has straight up/down elongated holes which are spaced 1/4-1/2 too short to have both holes line up with the 2 holes in the bottom of the main speaker bracket. What am I missing? (picture below)
|
Re: 67-72 cab corner 6x9 speaker brackets
Bigblock73,
Your inbox is full, but on a similar note to the above, the floor brackets are bent at 90 degrees, which considering the cab slopes done significantly at the point, would make it impossible for the floor bracket to be in contact with both the floor and bracket. I already started fabbing up new floor brackets, longer, holes in right spots, bent at about 120 degrees, but just wondering if you may be sending out floor brackets for different years with the 67-72 main speaker brackets. |
Re: 67-72 cab corner 6x9 speaker brackets
Quote:
|
Re: 67-72 cab corner 6x9 speaker brackets
I would like a set with holes for 67-72.
Richard |
Re: 67-72 cab corner 6x9 speaker brackets
I would like a set with holes also
|
Re: 67-72 cab corner 6x9 speaker brackets
Those of you with those brackets and carpet- are you guys running the carpet underneath the speaker brackets or just cutting the carpet short and buttoning against the bottom? Can't really tell from all the pictures.
|
Re: 67-72 cab corner 6x9 speaker brackets
Pm sent, I would like a set with holes. Thanks Gary
|
Re: 67-72 cab corner 6x9 speaker brackets
I would like a set for 67-72 with holes. PM sent, Thanks
|
Re: 67-72 cab corner 6x9 speaker brackets
I will take a set with holes if you still have any. Thanks!
|
Re: 67-72 cab corner 6x9 speaker brackets
I would like a set with holes if you have any available. Thank you
|
Re: 67-72 cab corner 6x9 speaker brackets
I would like a set for my 67 with no holes. Thanks..
|
Re: 67-72 cab corner 6x9 speaker brackets
Is the set with no holes still available?
|
Re: 67-72 cab corner 6x9 speaker brackets
Would like a set with holes for a 67 please, the ones in my 65 fit perfectly, so we’re going to do it again.
|
Re: 67-72 cab corner 6x9 speaker brackets
Hi, could someone possibly show what mods they did to the passenger side lower bracket to install the speaker panel, pictures would be great .
Thank you in advance |
All times are GMT -4. The time now is 01:10 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com