The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 4 of 8 123 4 5678
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)
-   -   CA 61 Suburban Part Out (https://67-72chevytrucks.com/vboard/showthread.php?t=676600)

perro13 08-04-2015 01:07 AM
Re: 61 Suburban Part Out
 
Quote:
Originally Posted by RedRoad (Post 7263154)
Not sure if you made it down this weekend, still interested.

Ill be heading up 3rd week of aug or ship what ever you prefer
been swamped, didn't make it down. whatever u want to do. I'll be down in 2 weeks also around the 14-15. I forgot to take picture of the other wheel, there both in same condition.
http://i275.photobucket.com/albums/j...psbxc9swky.jpg
http://i275.photobucket.com/albums/j...psnuj717bx.jpg

RedRoad 08-04-2015 03:13 AM
Re: 61 Suburban Part Out
 
That one looks a little better than the one up front, Ill take it. Any idea on shipping cost just in case?

Thanks

pimpston65 08-04-2015 08:34 AM
Re: 61 Suburban Part Out
 
i forgot to mention the valance has two bolts on top also, near the edge by the wood!!!

Jcox68rt 08-04-2015 05:52 PM
Re: 61 Suburban Part Out
 
I'm looking for the firewall side of a high hump trans tunnel? Know anybody who has one? Shipped to 93422...

Thank you,

Jason

Joemomma1 08-04-2015 10:53 PM
Re: 61 Suburban Part Out
 
Quote:
Originally Posted by Joemomma1 (Post 7259338)
How about the rear lower pan to do a lift gate conversion?

Thanks
Is this available? Thanks

perro13 08-04-2015 11:59 PM
Re: 61 Suburban Part Out
 
Quote:
Originally Posted by Joemomma1 (Post 7264051)
Is this available? Thanks
Sorry about that, didn't see the 1st post. I'm going to hold on to it. If I decide to sell, I'll et you know.

Jcox68rt 08-05-2015 12:24 AM
Re: 61 Suburban Part Out
 
Quote:
Originally Posted by Jcox68rt (Post 7263752)
I'm looking for the firewall side of a high hump trans tunnel? Know anybody who has one? Shipped to 93422...

Thank you,

Jason
It's for my 63 GMC truck

1960chevypanel 08-07-2015 02:13 PM
Re: 61 Suburban Part Out
 
Price and cond on roof skin?

michael bustamante 08-07-2015 02:17 PM
Re: 61 Suburban Part Out
 
has anybody asked for that license plate panal that has "chevrolet" on it?

pimpston65 08-07-2015 02:33 PM
Re: 61 Suburban Part Out
 
dont forget about me!!!

perro13 08-07-2015 04:03 PM
Re: 61 Suburban Part Out
 
Quote:
Originally Posted by pimpston65 (Post 7266648)
dont forget about me!!!
Haven't forgot about you, Not enough time in the day. My sawzall took a crap too.

pimpston65 08-07-2015 05:05 PM
Re: 61 Suburban Part Out
 
Quote:
Originally Posted by perro13 (Post 7266717)
Haven't forgot about you, Not enough time in the day. My sawzall took a crap too.
ouch!!! i hear ya on the time never being enough for outselves. had to drop the bad news on a friend today that he needed an engine. good news i get paid to source and drop another one in!!!

perro13 08-07-2015 06:37 PM
Re: 61 Suburban Part Out
 
Quote:
Originally Posted by michael bustamante (Post 7266641)
has anybody asked for that license plate panal that has "chevrolet" on it?
asking $100

perro13 08-07-2015 06:42 PM
Re: 61 Suburban Part Out
 
Quote:
Originally Posted by 1960chevypanel (Post 7266634)
Price and cond on roof skin?
$250
heres a few pics have more if needed. rust wise it nice. has a small dent. see the last picture
http://i275.photobucket.com/albums/j...pswxaathxh.jpg
http://i275.photobucket.com/albums/j...psablo2xkq.jpg
http://i275.photobucket.com/albums/j...psonzmciwp.jpg
http://i275.photobucket.com/albums/j...ps8masgp1d.jpg
http://i275.photobucket.com/albums/j...psbz5ysuwl.jpg

62 Stepside 08-07-2015 07:45 PM
Re: 61 Suburban Part Out
 
Thanks perro just got pedals today. Now have to find way to keep wife off my back about working on house and get some work done on truck....

chad64chevy 08-08-2015 05:47 PM
Re: 61 Suburban Part Out
 
no sure if any one has asked but how much for the gas tank door an about two inches or so around it? a cut out so I can weld it in on my truck

Grandpa54 08-08-2015 08:07 PM
Re: 61 Suburban Part Out
 
Perrio, how much for the 2 panels that are over the side windows shipped to 93301 thanks mark

perro13 08-09-2015 06:07 PM
Re: 61 Suburban Part Out
 
Quote:
Originally Posted by chad64chevy (Post 7267631)
no sure if any one has asked but how much for the gas tank door an about two inches or so around it? a cut out so I can weld it in on my truck
$47 shipped

perro13 08-09-2015 06:38 PM
Re: 61 Suburban Part Out
 
Quote:
Originally Posted by Grandpa54 (Post 7267754)
Perrio, how much for the 2 panels that are over the side windows shipped to 93301 thanks mark
The long ones?

chad64chevy 08-09-2015 06:44 PM
Re: 61 Suburban Part Out
 
Quote:
Originally Posted by perro13 (Post 7268493)
$47 shipped
will that included the filler tube with it?

perro13 08-09-2015 07:13 PM
Re: 61 Suburban Part Out
 
Quote:
Originally Posted by chad64chevy (Post 7268512)
will that included the filler tube with it?
No, using filler tube for another project.

Grandpa54 08-09-2015 11:03 PM
Re: 61 Suburban Part Out
 
Quote:
Originally Posted by perro13 (Post 7268508)
the long ones?
yes

michael bustamante 08-10-2015 04:46 PM
Re: 61 Suburban Part Out
 
ill have pass bud but thank you.

64chevycrewcab 08-11-2015 01:24 AM
Re: 61 Suburban Part Out
 
Do you front and rear slider side window frames for the passenger side for a 66 Burb?

tmck 08-11-2015 08:03 PM
Re: 61 Suburban Part Out
 
Do you still have all the interior trim around the side windows, both sides? Also the top two long pieces that roll up to the headliner. 14 pieces total. If so how much. I can pick up


All times are GMT -4. The time now is 01:11 PM.
Page 4 of 8 123 4 5678
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com