Re: Restoring Rusty
3 Attachment(s)
of course nothing's easy but everything must be black, so we used some Denatured Alcohol to wipe off the ol' swivel sticks and tapped them off so that they could be painted black, just using the same semi flat black we used under the hood on the engine bits
to slide them in was a pain, I did not know weather to lube them up with the Rich recommended white lithium grease or slip them in dry, so I split the difference and lubed one up and left the other side dry, LOL in the pics the sticks are still not slid in all the way, (as I came to find out when I went to mount them) |
Re: Restoring Rusty
Quote:
http://www.classicparts.com/1973-78-.../#.VWSibUZ_yao |
Re: Restoring Rusty - Radiator Support
Quote:
|
Re: Restoring Rusty
Quote:
http://www.classicindustries.com/pro...ts/t70841.html |
Re: Restoring Rusty - Anatomy of a Visor
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Updates!
|
Re: Restoring Rusty
Quote:
but as of the first of the month he has already ordered the following 1. Brand new fuel gauge 2. Another used Tach off of eBay (for $45 bucks I had to take the risk) 3. Brand new Holley carb tunning kit [more on this later] but it does involve a Test so you all may wanna study up, hee hee |
Re: Restoring Rusty
Rusty, how did your visors turn out?
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty - Replacement Tach
4 Attachment(s)
what do we have here, looks like our replacement new used Tachometer showed up
don't mind the Amazon box, I bought it off of eBay for $45 bucks, using the buy it now option, now I either got really taken if it does not work, or I scored majorilly as a new one is $150 bucks about to put it in, so wish me luck... |
Re: Restoring Rusty
well the replacement Tach appears to be working, it may be 75 RPMs off but that's assuming my used digital timing light is spot on, I will have a friend at a shop compare it to his timing light so we know for sure, but hey it's just a truck so it's good enuff for me
|
Re: Restoring Rusty
Good enuf for you means money well spent. Great progress against your to-do list!
|
Re: Restoring Rusty
Sell the other one. Someone will buy it even though it's off a bit. It works and it can be re-calibrated... For that matter so can this one.
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Make the list...and share it.
|
Re: Restoring Rusty - New Small Fuel Gauge
5 Attachment(s)
suga'
... yes please special thanks to Rich for recommending Classic Parts, got a great price on this brand new fuel gauge, even the back studs are labeled now off to install it |
Re: Restoring Rusty
I flipped the resistor over so the contacts were on top, and put star washers under the nuts so the resistor wouldn't lose contact so easily. Common "failure" mode that gives 1/4 reading when full. Take it out, tighten the connections, works again. Infuriating given how much digging you have to do to get to it.
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty - 74 to 78 Gauge Cluster Swap
5 Attachment(s)
I hate this West facing garage the sun is right in my face and right in the camera lens
We got ourselves an electric oil pressure gauge, a volt meter, a TACHOMETER, and a new fuel gauge.... Fuel gauge is in, this 74 to 78 gauge cluster swap is officially done! Thank you all for your help |
Re: Restoring Rusty - Period Correct '74 Radio Knobs
1 Attachment(s)
Quote:
... now who did I loan that Bon Jovi cassette to back in the summer of '86? |
Re: Restoring Rusty
Glad to see it all back together. Right or wrong, I like the knobs on the radio.
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
4 Attachment(s)
So Greg it's been like 10 minutes since you completed your last project, what are you going to do next...
I don't know guys... I am kinda tired, so I think it's BED TIME!!! |
Re: Restoring Rusty - Bed Time
1 Attachment(s)
if you all recall the bottom of my bed is toast, so it's time to replace it with the bottom from that donor bed I bought for $40 bucks a couple months back
|
Re: Restoring Rusty - Removing the Bed
4 Attachment(s)
when I took the donor bed apart I noticed the sides are indeed welded to the bottom portion in the rear corners of the tailgate
below I am showing you what needs to be cut |
Re: Restoring Rusty - Tailgate Off
3 Attachment(s)
alright, here we go...
Tailgate Off! |
Re: Restoring Rusty
5 Attachment(s)
as you know I am a one man circus act so I am going to attempt to take the bed apart in pieces whilst on the truck, piece by piece by piece
first to come off will be the driver side wheel well, but to get that off we need to remove the front strut bar thingie and the mud flat thingie behind it |
Re: Restoring Rusty
5 Attachment(s)
alright about a dozen bolts later and a good stump with my foot and the rusty driver side inner bed fender was off
as you can see the inner fender has seen better days, nothing a man with a welding gun couldn't fix, but that man aint me, plus we have a replacement waiting in the corner of my garage from the donor bed |
Re: Restoring Rusty
2 Attachment(s)
probly best to remove the tailights before the hard concrete floor removes them for me
|
Re: Restoring Rusty
2 Attachment(s)
so after undoing about 5 bolts between the cab and the bed side and another 2 or 3 under the bed by the cab, and another 5 or 6 in the back of the bed underneath, it was time to cut off them welds
|
Re: Restoring Rusty
2 Attachment(s)
only to realize there is another weld behind the tailgate hinge, time to remove the hinge and cut that one too, what a pain
|
Re: Restoring Rusty
4 Attachment(s)
and there we have it, drive side is off
I am pretty pleased, no broken bolts, and I did not spin any of those weld on nuts the key to this operation is lubricant, (for you aka beer, and for the bolts, ie PB Blaster) unscrew a bolt a couple turns, then screw it back in, I don't care how easy it is coming out, you are building up heat and dragging a bunch of rust and grime into the threads, so screw it back in, then back out again, and you won't break any of them more importantly this side is in really good shape, just surface rust and dust, other than that very solid |
Re: Restoring Rusty
1 Attachment(s)
this is what the weld on section looks like when the side is completely removed as you can see it indeed was welded on, not the greatest picture quality but you git the idea
|
Re: Restoring Rusty
Yes this Clown act did get this side off by himself, it can be done fellars! |
Re: Restoring Rusty
5 Attachment(s)
so after dinner we pressed on and got the passenger side wheel housing off, this side is rusty but solid, man that metal is so thick, it is awesome good ol' AMERICAN steel, we may not need the donor for this side
|
Re: Restoring Rusty
1 Attachment(s)
and then the unthinkable happened we ran out of beer, and we had to stop for the night, so here I am drinking my wifes' white wine as I type this, don't you dare judge me, or there won't be any future updates ~ JK
|
Re: Restoring Rusty
Quote:
Mostly it depends on whether or not I have had to do something on my own truck. If not, I only know what I've read. Glad I got the info to you in time for you to use it! |
Re: Restoring Rusty
Wow, lots of work done there! Are you going to paint the bedsides while it's all apart? And how are you going to re-weld the joints you ground out?
Believe it or not, my original bed floor looked worse than yours. |
All times are GMT -4. The time now is 11:29 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com