Re: Lets see the engine pics!!
1 Attachment(s)
Wow - lots of great engines! Mine is tame by comparison to most, but fine for my '67 farm truck: GM 350 crate motor w/Brodix IK180 aluminum heads, Comp Cams hydraulic roller cam & lifters, Edelbrock Performer EPS intake & AVS2 carb. I dressed it up a bit with a pair of GM Corvette LT-1 valve covers.
|
Re: Lets see the engine pics!!
4 Attachment(s)
Try a couple more of the new engine:
Trying to get the jist of posting pix. So, this engine was a 572/620 engine with very low miles. But, I figured, if I’m going through all the trouble of installing a new engine, I may as well go through it first. I sold the GM aluminum heads off of it, and bought a set of AFR 335v2 heads. Then I messaged Chris Straub, and asked if he could make me a nice solid roller for the street. He asked me what kind of horse power I was looking for, and when I said around 700-750, he just last he’d and said, “That’s it?” I said it only has 9.6:1 compression. He said we can make a lot more then that if you want it to. Make it at least 750 then, I said. So with the cam, I got solid lifters, which took eight months to get, due to Covid. The Jomar stud girdle fits perfect. I had to buy another set of taller rocker arm studs, as with the proper length pushrods, the nuts were nearly on by four threads. Smith Brothers 7/16” x .120” pushrods. And a set of Straub Tech roller rockers. This is a gen 6 block, and I’m using a double roller timing chain from Straub Tech as well. Had to get a different front cover, and modify a cam button for it. Lots of, one step forward, two steps back, on this build. Headers are from Dan Lemon, Lemon’s Headers. (2 1/8” primary, down to 3 1/2” collectors) Edelbrock Super Victor intake. And more I’m sure I forgot to mention. |
Re: Lets see the engine pics!!
3 Attachment(s)
It's a .060" over 427 with forged JE domes, L34 closed chamber heads, Comp Magnum roller rockers & rods, Clay Smith 304 solid cam, Howards EDM lifters, Hedman Elite headers. L34 forged crank balanced w/rods & pistons to "dead nuts" Motor for "Nasty Sally" 72 LWB C/10 400THM 12-bolt 4:56 Posi...Low 11's in the 1/4.
|
Re: Lets see the engine pics!!
1 Attachment(s)
My ZZ6 installed 1 year ago. Drove it on power tour 2022.
|
Re: Lets see the engine pics!!
2 Attachment(s)
Here's a before, after, and nearly complete.
|
Re: Lets see the engine pics!!
2 Attachment(s)
Pic of the 68 I did a frame off. LS6/T56 combo.
|
Re: Lets see the engine pics!!
2 Attachment(s)
A couple recently after I tidied up the plug wires.
|
Re: Lets see the engine pics!!
Boy you guys are a tough act to follow ! Incredible workmanship…:metal:
|
Re: Lets see the engine pics!!
Quote:
|
Re: Lets see the engine pics!!
1 Attachment(s)
|
All times are GMT -4. The time now is 11:24 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com