Re: Cross Member Drop?
Quote:
|
Re: Cross Member Drop?
wow nice progress! looks awesome, cant definatrly tell theres alot of time into that!
btw USA6x6 is no longer..... |
Re: Cross Member Drop?
WOW!!!
That thing is hella COOL!! Nice work!! |
Re: Cross Member Drop?
Quote:
Quote:
|
Re: Cross Member Drop?
I havent checked in on this for awhile.....looks really cool with the frame altogether. Nice work; looks like a lot of:m6: figuring this out.:lol:
|
Re: Cross Member Drop?
Subscribed... Points to you my friend for creativity and some nice fab work...
|
Re: Cross Member Drop?
1 Attachment(s)
Been working a few nights on a little more low buck old school flare for the truck. These valve covers are the old school finned aluminum that I really wanted. My Dad ran this particular set on his 37 Pontiac street rod for the past 30 years. These covers were old enough even back then that he bead blasted them and clear coated them before putting them in that car. I media blasted them again last week to get that 30 year old clear coat off of them and started polishing. Polishing is free it just takes time. I'm really happy with how these are turning out, they actually look better in person. Now just one more to go.
Before and after.... |
Re: Cross Member Drop?
Cant wait to see her done..
|
Re: Cross Member Drop?
subscribed!
|
Re: Cross Member Drop?
how is this beast coming?
|
Re: Cross Member Drop?
Slowly. Been working on some "Honey-do" projects the past couple months around the house. Back into bodywork a little on the truck so not alot to show right now. Over the next few weeks I hope to complete the body work and get it in final primer (cab and frontend). Also have to tear down my 4x4 version 700R4 and swap in a 2WD output shaft and tailgousing then put it back together. Once that's done it will be about ready to stick the motor in it for good and finish out the drivetrain.
Thanks for the nudge, I need it sometimes. |
Re: Cross Member Drop?
:thumbs:
|
Re: Cross Member Drop?
Im kinda catching the end of this build. But why did you cut the floor out instead of droppin the engine mounts? I am getting geared up to do this on my 64 and use stock susp. Already seen it done on a friends truck and it worked out great. He cut a set of mounts down to lower the engine the same amount as the notch and it worked out great.
|
Re: Cross Member Drop?
phenomenal build. Keep it up!
|
Re: Cross Member Drop?
Quote:
|
Re: Cross Member Drop?
when you notch your cross-member the engine stays in the same place...if you Z the frame it moves everything up
oops I forgot this notch is different.....here is how to do it with out moving the engine up http://www.captkaoscustoms.com/chopcross.html |
Re: Cross Member Drop?
Quote:
|
Re: Cross Member Drop?
I gathered that. Why didn't you keep the motor mounts at the same height?
|
Re: Cross Member Drop?
Quote:
|
Re: Cross Member Drop?
Understood.
|
Re: Cross Member Drop?
any updates
|
Re: Cross Member Drop?
Figure I better update before this thread drops off the radar. Still muddleing thru the body work. I've been making myself work even an hour a month on it, but I'm finally nearing the end. Almost to final primer stage on the cab, doors, front end, etc. Won't be long now I hope.
I scored a complete serpentine belt set-up and accessories off of an 84 Camaro. This give me PS, high output Alt, A/C, etc in a nice clean modern package and best of all it was FREE!!. So I pulled out my York compressor and started looking for a serp pulley for it. Too much money to buy new so I looked at other options. I ended up taking the smog pump pulley (from the Camaro set-up) and it happens to be almost the same size as the York V-belt pulley. Took it to my Dad's lathe and cut the outer ring off of the spare serpentine pullley, then turned down the OD of the V-belt York pully so the serp outer ring would slip on it and welded them together. Took 30 minutes, worked like a charm and saved me even more money. Luckily both pulleys where nice heavy solid units and not the cheap sheet metal pulleys. Made me some homemade mounts and the York now resides on the front of my motor awaiting a new longer belt. With any luck, in two weeks I hope to order the sheet metal for bed sides and rear fender extension pieces so we can really see what this thing is going to look like for real. |
Re: Cross Member Drop?
Sounds cool.... But as you are well aware...... We need pics ;)
|
Re: Cross Member Drop?
Quote:
|
Re: Cross Member Drop?
LOL... I'd be glad to post some pics if I could find where my wife hid the camera. It's never in the same place twice, so I can never find it.
|
All times are GMT -4. The time now is 05:35 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com