The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 5 of 6 1234 5 6
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)
-   -   KS 64 chevy parts and some GMC parts 2x4 and 4x4 (https://67-72chevytrucks.com/vboard/showthread.php?t=550288)

travz500 01-31-2014 01:46 AM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Quote:
Originally Posted by SouthpawGarage (Post 6500338)
Hi, would you be willing to sell a roof, or part of one?
What part and how much of it you need

Flthead 01-31-2014 05:31 AM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Need 8ft fleet bedside braces. The round steel braces bolt from bed sides to cross members. Any front sheet metal bolt - fenders inner fenders. Grille ect. /Small back window prefer tinted but may go clear . Deluxe dash knob set. Shipping to nj 08009

truckeroy 01-31-2014 09:58 AM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Did you locate the standard cig. lighter? Also, do you have a pair of the rear spring retainer clamps (round plates)?

travz500 01-31-2014 11:13 AM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Quote:
Originally Posted by truckeroy (Post 6500650)
Did you locate the standard cig. lighter? Also, do you have a pair of the rear spring retainer clamps (round plates)?
Forgot about lighter will look for it tonight I think I have new spring retainer I will look for both depends on how much snow we get may not be able to get to parts till Sunday

truckeroy 01-31-2014 11:36 AM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Thanks, no hurry. I'm just trying to fill an empty hole in the dash. HA. PO cut the rear coils to lower them and used a steel bar to hold the bottom in place. I am going to need some different rear springs also. They may be expensive to ship, but do you have a set of old rear springs also? I know I can get new springs and retainers, just hoping to save a few bucks. going used.

SouthpawGarage 01-31-2014 12:00 PM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
4 Attachment(s)
Quote:
Originally Posted by travz500 (Post 6500409)
What part and how much of it you need
I'm looking for the corners on either side, and maybe some of the front few inches of the roof panels in these locations. Maybe also the area on the topside of the driver door opening, front half. Driver's side is much worse for some reason.

I don't know if you're willing to cut up a cab, I'm just trying to get a feel for what's out there.

Hopefully these pictures will be better than my description. Thanks

travz500 01-31-2014 09:56 PM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Quote:
Originally Posted by SouthpawGarage (Post 6500870)
I'm looking for the corners on either side, and maybe some of the front few inches of the roof panels in these locations. Maybe also the area on the topside of the driver door opening, front half. Driver's side is much worse for some reason.

I don't know if you're willing to cut up a cab, I'm just trying to get a feel for what's out there.

Hopefully these pictures will be better than my description. Thanks
No cant help you sorry

SouthpawGarage 01-31-2014 10:26 PM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Quote:
Originally Posted by travz500 (Post 6501779)
No cant help you sorry
Thanks anyway

travz500 01-31-2014 10:56 PM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Quote:
Originally Posted by Flthead (Post 6500502)
Need 8ft fleet bedside braces. The round steel braces bolt from bed sides to cross members. Any front sheet metal bolt - fenders inner fenders. Grille ect. /Small back window prefer tinted but may i go clear . Deluxe dash knob set. Shipping to nj 08009

I do have a aluminum grille

DPowers 01-31-2014 11:16 PM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Quote:
Originally Posted by LostMy65 (Post 5865367)
Thanks for the pic, but that appears to be an aftermarket cable.
The OEM choke cable matches the other knobs.
http://67-72chevytrucks.com/vboard/a...1&d=1318189611
Posted via Mobile Device
that back yard looks familiar

SouthpawGarage 02-01-2014 01:24 AM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Quote:
Originally Posted by travz500 (Post 6501779)
No cant help you sorry
How about a front panel for stepside bed?

travz500 02-02-2014 06:20 PM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Quote:
Originally Posted by SouthpawGarage (Post 6502103)
How about a front panel for stepside bed?
No front panel

travz500 02-02-2014 06:27 PM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Quote:
Originally Posted by travz500 (Post 6500772)
Forgot about lighter will look for it tonight I think I have new spring retainer I will look for both depends on how much snow we get may not be able to get to parts till Sunday
Got the socket but not the lighter part but I do have a factory block off for that hole. I also found the spring retainer parts all new in the bag will give you the lighter socket and rhe spring retainer for $30 shipped

travz500 02-02-2014 06:31 PM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
2 Attachment(s)
Quote:
Originally Posted by 64chevmn (Post 6498801)
The price for the radio delete plate will work, but do you have any pictures before I commit?

Dan
Heres delete plate pic sorry took so long

64chevmn 02-02-2014 07:33 PM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
I will have to pass on the radio delete plate; I'm looking for one without the ribs......sorry.

Dan

truckeroy 02-03-2014 04:05 PM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Thanks for looking. I would rather have a cig. lighter than a block off plug. Since I only need the two bottom spring retainers, I think I'll just look for a couple of used ones. Thanks again.

Roy

pimpston65 02-18-2014 03:53 AM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
1 Attachment(s)
i need a few parts. side mirror the kind with off-center mount. running boards for a swb 65 c10, and the lock screw for the pull heater control pics to follow

pimpston65 02-18-2014 03:54 AM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
1 Attachment(s)
running boards

pimpston65 02-18-2014 03:56 AM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
1 Attachment(s)
locking screw

travz500 02-18-2014 11:54 PM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Quote:
Originally Posted by pimpston65 (Post 6531519)
locking screw
Sorry dont have any of those parts

pimpston65 02-19-2014 12:21 AM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
thks for checkin

TommyDuncan 02-19-2014 01:41 AM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Quote:
Originally Posted by travz500 (Post 5730780)
Hey LOSTMY65 are you still looking for a metal barrell fan shroud? i am bought a 65 GMC and it has the 305 in it so I am assuming it may have one like this just wondering who would need it or if all these trucks had them thanks
Do you still have a V6 shroud?

nhr3 03-06-2014 09:08 PM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Looking for a three lever deluxe heater control and a complete ashtray (paint not an issue in either case)

travz500 03-06-2014 10:31 PM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Quote:
Originally Posted by TommyDuncan (Post 6533178)
Do you still have a V6 shroud?
no sure dont

travz500 03-06-2014 10:32 PM
Re: 64 chevy parts and some GMC parts 2x4 and 4x4
 
Quote:
Originally Posted by nhr3 (Post 6561535)
Looking for a three lever deluxe heater control and a complete ashtray (paint not an issue in either case)
I got both I believe $70 shipped


All times are GMT -4. The time now is 04:11 AM.
Page 5 of 6 1234 5 6
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com