Re: Project: Blank Slate
 

Yes, much appreciated Heath.

Re: Project: Blank Slate
 

Well what can I say..... :D

I hope to have them up by this weekend, sorry Heath! :lol:

Re: Project: Blank Slate
 

I believe Friday is the Weekend ........ it's 5 0'clock SOMEWHERE

Re: Project: Blank Slate
 

Yeah...come on Nate...."It's 5 o'clock somewhere"....Man, that makes me wanna go do my J-O-B....see sig below!!!....hahaha

Re: Project: Blank Slate
 

One of the nicest trucks on the board! The drop is awesome!

Re: Project: Blank Slate
 

STILL waiting!!!!!! The weekend is almost over!!!!!!!

Re: Project: Blank Slate
 

Well guy's.... sorry I left you hanging all weekend, but it seemed like somethign would always come up just as I was about to sign into the board. So let's play a little catch up.

Here's a quick shot of the infamous 15x7 6-lug rallys before they were taken to my body shop to be blasted clean:

Attachment 488173

Attachment 488174

Attachment 488175

Now if you notice, these pics were taken with the wheels in the back of the '69. As you can guess, these wheels have now been dropped off and picked up for painting. :D

Re: Project: Blank Slate
 

On Wednesday (8/12) I scheduled an appointment at my Chevy dealer (Putnam Chevrolet) to have my truck realigned after we blew apart the front end to install the drop kit. While I was there I took in some of the sites they had parked in the lot. Look for another thread to be posted soon with some of those shots. :D

Here's a few shots of the truck awaiting it's fate on the rack, and then being driven to and resting on the rack:

Attachment 488176

Attachment 488177

Attachment 488178

Attachment 488179

Now I know I told you to look for another thread to review the pictures of what I spent my time looking at while waiting for my truck to be realigned, but since this next shot had my truck in the background, I figured I would give you a preview of what's to come... :D

Attachment 488180

Yes boy's that is a Factory (reconditioned) 1969 Chevrolet Camaro Convertible SS w/ a 396..... commence drooling.....

Re: Project: Blank Slate
 

There was a camaro in that picture?






j/k


Truck looks really good.

Re: Project: Blank Slate
 

So after I paid the bill, and mopped up the front showroom floor, it was off to work. However, I just had to make a detour... so I stopped in at my body shop (Xtreme Body and Paint) and dropped off the 15x7 rallys and a set of headlight bezels. After a few hours I received a call from the shop telling the pieces were ready to be picked up, so I left work early and here's what I ended up picking up:

Attachment 488181

Attachment 488182

Attachment 488183

Attachment 488184

Re: Project: Blank Slate
 

And here's a few shots of the headlight bezels:

Attachment 488185

Attachment 488186

Attachment 488187

Attachment 488188

I will have more updates this evening...

Re: Project: Blank Slate
 

Well I figured I had better point that out so it atleast wasn't over looked.... :lol:

Re: Project: Blank Slate
 

Hey Nate
Have I told you that the truck looks terrific after it's new stance!!!

Re: Project: Blank Slate
 

man that truck is sweet!!

Re: Project: Blank Slate
 

Nice,...
I'm still looking for you another pair of the "super rare" 15x7's,... so you can keep those.
So anyone, that has a set of these (2 or 4),... PM me or Nate.
I might buy two if you have to purchase a complete set.

Re: Project: Blank Slate
 

Nate,

It looks soooo nice! Any plans for a c-notch? How's the pumpkin clearance. Plus you didn't mention how the alignment went. What's next?:metal:

Re: Project: Blank Slate
 

I really like your survior truck. I think they look so cool dropped. I bought a 69 survivor short bed back in november and put a 4/6 drop on mine to.

Re: Project: Blank Slate
 

No, I'm not planning on running a c-notch as I want to be able to return it to stock if need be... not that it's likely. :D

Your '69 is nice, and I agree with you about lowering these trucks, nothing looks better. Glad to have you aboard!

Re: Project: Blank Slate
 

Return it to stock if need be.:lol:
I love this site, always good for a chuckle.
You know it will go lower...eventually.:metal:

Re: Project: Blank Slate
 

Nice looking wheels Nate!!....Now get those things mounted up!!!LOL

So the alignment guy was old school, right??...No 'puter did the alignment, right?!?!?!

Re: Project: Blank Slate
 

Your truck is looking better and better! Seeing pictures of Putnam Chevrolet brings back memories of me cruising up and down Hwy 50 on a Friday night when I was a teenager. Thanks for sharing!

Re: Project: Blank Slate
 

I figured some of you guy's would get a kick out of that, once you go down, you never turn around. :D

Actually, they did hook it up to a computer, but he did have to put a personal touch on it. As with having a steering box with 97k miles on it, the system was a little loose, so his alignment skills were tested a little. Tommy knows what he is doing though.

I figured a couple of those shots might ring a bell for you. You couldn't beat Friday night in California, cruisin' up and down Hwy 50. Good times! :D

Re: Project: Blank Slate
 

As I mentioned before, this weekend I was able to shoot a couple coats of paint on the wheels, headlight bezels, as well as the center caps. Here's a list of the products I used for this process:

Duplicolor Etching Primer
Duplicolor Primer
Krylon Satin Paint
Krylon Metallic Paint (1403)
ScotchBrite pads (Red, Gray, White)
Blue Painters Tape

I will try to get a shot of the items posted up tonight.

Re: Project: Blank Slate
 

We will start with the headlight bezels:

Attachment 488388

Attachment 488389

Attachment 488390

Now there's a lot of steps involved which aren't pictured and those include:

Sand, Etching Primer, Sand, Primer, Sand, Primer, Sand, Paint, Sand, Paint, repeat until happy :D

And here's what they look like now (sorry for the quality):

Attachment 488391

Attachment 488392

Re: Project: Blank Slate
 

The same steps which were used above, were also used on the rallys. Here's a shot of the wheels after being primed:

Attachment 488393

Attachment 488394

Here's a shot of the wheels after all the prep, sanding and final coat. I am not 100% satisfied with how they turned out, so I might break out the sanding pads this weekend and try to satisfy by crazy mind. :D

Attachment 488395

Attachment 488396

Attachment 488397

Re: Project: Blank Slate
 

While waiting for the wheels to dry, I pulled off all four caps and commenced prep/paint on the lower part of the cap. Here's how they turned out:

Attachment 488398

Attachment 488399

Attachment 488400

Re: Project: Blank Slate
 

Thanks to DMARCUM123 for being willing to trade a few parts, Blank Slate received some new items that are waiting to be installed. A while back he spoke up that he would be willing to swap my radio delete and shoulder harness plugs for a set with original light green paint on them. After shipping him my pieces and him returning his pieces to me, here's what I received on Saturday (sorry for the quality of the picture):

Attachment 488401

The color matches perfectly, thanks again DMARCUM123!

Re: Project: Blank Slate
 

why the delete plate didnt you just put a radio in

Re: Project: Blank Slate
 

Mainly just to have since it was original paint. :D

Re: Project: Blank Slate
 

What's wrong with this picture???;)

Re: Project: Blank Slate
 

Maybe I used them wrong, but I'm still a fan of sandpaper over scotchbrite pads. The pads seemed to leave the surface scratched looking. Paper makes things smooth. jmo.

Re: Project: Blank Slate
 

The stickers are not stock style, but look good. They all have six lug holes, three hold down screw holes. Not sure what's wrong. They look fine to me.:lol:

Re: Project: Blank Slate
 

The only thing I see that might be wrong is the upper right sticker looks like it has a small imperfection. It may be just a reflection though. Other than that they look good! :metal:

Re: Project: Blank Slate
 

Nate has new set of GM "center cap decals" he's hiding,...

Re: Project: Blank Slate
 

Keith is right guy's... I do have a nice new set of GM center cap decals to replace the cross flags. In my opinion.... :rolleyes:.... I would like to find a nicer set of caps for the decals since they are in perfect condition, but I've been told they are about as nice as I will ever find so mount them up! After a little more cleaning on the center caps the stickers will be mounted and you guy's will have some more pictures to look at. :D

Re: Project: Blank Slate
 

I used sand paper and scotchbrite pads during the process, and the only issue I had with the sand paper was that it seemed to rub off on the edges before I ever got to the actual desired sanding area. Then again, this is my first attempt to actually make something look real nice while using a rattle can.

Nothin' wrong with 6-lug caps... :lol:

Re: Project: Blank Slate
 

From the sound of it, are those stickers rare? Blue or gold bowtie? Pic, or are you not wanting to spoil the unveiling?

I ran these forever until cats pissed them till ruined.

http://i176.photobucket.com/albums/w...S/IMG_1629.jpg

Metal caps and spinners. I love the stickers, haven't ever seen them on any other car/truck. I'll sand the spinners, apply black and see what they look like on the short caps, if they fit. I would rather have them shiny new chrome.;)

Re: Project: Blank Slate
 

So.......are the wheels on the truck yet???


What about now???



What about now??? :D

Re: Project: Blank Slate
 

Jackpot!

I found the "needle in the haystack!"

Actually I found four of them.
I went to a huge swap meet this weekend in Springfield, MO and found these beautys. I originally thought the owner knew what he had by his price,... then I realized he was talking about 4 wheels not 2. (two of them were hidden from view)
So,... Nate now has his two rallleys (the super rare 15x7 6-lug version) to replace the two he borrowed from member "hot trux",... and I have two to keep or maybe sell on here (if there is some serious interest).
I think Nate was as stoked as I was.

Re: Project: Blank Slate
 

Nate,
If you are needing some better center caps...check out these..
http://www.lakeshorewheelandtire.com...4&prevstart=16
Yes I know they are plastic but they look great, ordered a set myself, and since you have the decals...you could put them over the hideous 4x4 emblems and have a nice set of center caps for your wheels. Installed on the ralleys they look oem...at a bargan price!
Jeff