Re: My daily driver/beater : How I turned lemons in lemonade
Congrats on the running 4X4!
|
Re: My daily driver/beater : How I turned lemons in lemonade
Glad you got it running! Any issues with the TBI/ECU?
|
Re: My daily driver/beater : How I turned lemons in lemonade
You know, I'm pretty sure Rustoleum comes in a cream color that's a decent match for the factory cream. Would make a good candidate for a rolled on job
|
Re: My daily driver/beater : How I turned lemons in lemonade
I've been pushing on the 4x4 lately. I can't do serious work to the stepside without having another pickup to drive around while its torn apart. The 4x4 needs tires and I've been mulling over my options. I followed this thread .....click here....and want a similar look to my k2500.
Pic from above link..... http://i276.photobucket.com/albums/k...d7da76f67b.jpg And I was trolling Craiglsist at the fire station yesterday..... http://i276.photobucket.com/albums/k...e6acb9ea1d.jpg So when I got off work this morning I took a detour on my way home.... http://i276.photobucket.com/albums/k...d3bfcb2c02.jpg http://i276.photobucket.com/albums/k...1da3e50081.jpg http://i276.photobucket.com/albums/k...8084f95a7e.jpg http://i276.photobucket.com/albums/k...bbcdc8ec99.jpg I didn't really have the money on this paycheck cycle, but I made it work anyway. That was a very good deal for those wheels. I like aluminum wheels and factory aluminum wheels are top quality. On the stepside subject, I had some straight up generosity from another member on here. I got a box in the mail yesterday. Here is step number one to the airbag suspension. http://i276.photobucket.com/albums/k...ceb89f6856.jpg |
Re: My daily driver/beater : How I turned lemons in lemonade
Those are nice .
|
Re: My daily driver/beater : How I turned lemons in lemonade
Quote:
|
Re: My daily driver/beater : How I turned lemons in lemonade
I'm probably gonna order a set of those goofy Buckshot Mudder tires for them and bolt em on. No wheel restoration for me right now. I well remember the Alocas.
|
Re: My daily driver/beater : How I turned lemons in lemonade
http://i276.photobucket.com/albums/k...b8b6e09472.jpg
Tx Firefighter, how did you mount the 88-94 wheel? How hard was it to do? I have a 88 parts truck with that wheel and my 85 has the stock wheel...its too big for my liking.:smoke: |
Re: My daily driver/beater : How I turned lemons in lemonade
Quote:
|
Re: My daily driver/beater : How I turned lemons in lemonade
How do you pull the steering wheel off?
|
Re: My daily driver/beater : How I turned lemons in lemonade
steering wheel puller - but i usually just pull them off with a few solid tugs (of course after removing the nut!)
|
Re: My daily driver/beater : How I turned lemons in lemonade
Those PY0's look like they are in GREAT shape with just a little dust on them. That factory clear is pretty thick, perhaps a quick once-over with something like the headlight restorer polish will make them pop. I can totally understand your decision to bolt-on and go after the Alcoa experience...that was intense. Happy to see and hear that the 4x4 is slowly coming together for you.
The plans you've laid out for the stepside and your recent updates are definitely interesting. It'll be great to see this truck evolve and progress as well. |
Re: My daily driver/beater : How I turned lemons in lemonade
That's a steal on those wheels. Nice...
|
Re: My daily driver/beater : How I turned lemons in lemonade
The talk about pulling steering wheels made me think of an opportunity for some low buck tech.
For a good number of years, I worked as a mechanic for the US Postal Service. Probably one of the top five repairs we did on the mail trucks was repair complaint of "turn signal won't cancel". That's a cancel spring every time. The part was like 7 cents but you had to pull the steering wheel to change it. So, a bunch of us built these rock solid little steering wheel pullers. The beauty of them is no moving parts to get lost and they are small and easy to carry in your toolbox. I bet I've pulled over 1000 steering wheels with this little puller. You just start the two bolts into the holes in the steering wheel and tighten them back and forth. By the time you've tightened each one about two turns, the wheel is loose. http://i276.photobucket.com/albums/k...1c4cf2678b.jpg http://i276.photobucket.com/albums/k...68bb79a449.jpg http://i276.photobucket.com/albums/k...8ca724df64.jpg I've got a nice commercial steering wheel puller kit in the box with all of the fancy bolts and stuff, but it's too much trouble juggling all that crap when this little fella works every single time. Nothing to lose and fits in your pocket with ease. All you need is a little hunk of steel, a drill, two 5/16 bolts and some nuts and washers. I did a majority of my mail truck fixing on the tailgate of my service truck in post office parking lots all over the North Texas area. My tools were in a tool bag and the lighting was often by flashlight. Simple, bulletproof tools with nothing to lose is the order of the day in those cases. Edited to add, in looking at the pictures I guess I should swap a couple of fresh bolts into it. Those have about exceeded their service life. After 19 years.... |
Re: My daily driver/beater : How I turned lemons in lemonade
Quote:
Quote:
|
Re: My daily driver/beater : How I turned lemons in lemonade
Like the wheels too, agree really strong, run them also on 1986, CUCV M1008 1ton with Michelin 2.5 ton tires, the tall ones. Do some cross country driving in woods and they have stood up well.
Les |
Re: My daily driver/beater : How I turned lemons in lemonade
1 Attachment(s)
Kevin,
Wheels on CUCV, just back from cross country woods trip picking up firewood. Les |
Re: My daily driver/beater : How I turned lemons in lemonade
Kevin, thanks for the tip on the steering wheel tool! First wheel I tried to pull for my C10 was a really nice leather wrapped one like in your truck. I couldn't pull it off since I had no tool! was really pissed about that. Second time I tried in another yard, it popped right off by hand! No tool. Of course it was the basic rubber wheel, but anything was better than the little grant wheel. :lol:
|
Re: My daily driver/beater : How I turned lemons in lemonade
Any pics of the 4x4? I quickly looked for a build thread, but only found the flat bed build.
Speaking of that, you said that you can't start the step side build until the 4x4 is finished, but you still have the dually right? I'm guessing with the deep gears and big block, you'd rather not daily drive that thing until the big hauls are needed. Nice puller! |
Re: My daily driver/beater : How I turned lemons in lemonade
Quote:
|
Re: My daily driver/beater : How I turned lemons in lemonade
Quote:
|
Re: My daily driver/beater : How I turned lemons in lemonade
SUPER deal on the GM aluminum wheels.
I'm stealing your steering wheel puller idea also. I'm gonna go home and measure the center -to-center spacing on and old steering wheel and build one. Any chance you would be selling your dually? |
Re: My daily driver/beater : How I turned lemons in lemonade
Quote:
I'm way underwater on the truck financially (of course) and it's about half the truck I hoped it to be when I started driving it. I don't want to throw any more money at it right now. |
Re: My daily driver/beater : How I turned lemons in lemonade
Quote:
I'd sell the dually, but its a moot point I guess. With the money I have into it, I'd likely be out of line on my asking price. You guys know what kind of money I invested in the build, but your typical buyer sees flaky paint and bad interior and would classify me as a crack head on my price. |
Re: My daily driver/beater : How I turned lemons in lemonade
A working dually is a funny rig. They have no really capacity over a 3/4ton, either practically or legally when equipped witha commercial body. They are just really heavy and usually laden with a heavy body.
The one advantage is towing. I really like a dually when towing. Keeping me waiting on the 4x4 pics? Is it wrong to beg? :lol: |
All times are GMT -4. The time now is 02:20 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com