![]() |
Your 60-66 bagged projects?
1 Attachment(s)
Lets see everyones pics of works in progress of 60-66 c10's. Trying to get ideas for my 64 shorty! I wanna lay frame on 22's lets see you front and rear setups.
|
Re: Your 60-66 bagged projects?
i have bagged the front of mine but not the back yet i got the bag mounts from suisidedoors.com and airlift 300 psi bags 3''drop spindles and 2 inch drop lower a arms take a look it lays the cross member.
http://groups.msn.com/ROLLNLOW/thec10.msnw |
Re: Your 60-66 bagged projects?
ya any pics would he a great help gonna try and do this soon
|
Re: Your 60-66 bagged projects?
http://i26.photobucket.com/albums/c1...w/P4080005.jpg
that's w/ the front end layed out, not z'd yet and no notch at all w/ axle laying against the frame, but has the front end laying w/ the crossmember on the ground, and here's what it looks like now, haven't done the upper triangulated 4 link yet so that's why its in the garage, and has a full notch. Still has headers laying on the ground and the full exhaust under the frame in the second pic. http://i26.photobucket.com/albums/c1...Attachment.jpg |
Re: Your 60-66 bagged projects?
leftcoast66 i love the truck do you have any better pics of the truck dropped with the back knotch done sorry the last pic is small and dark i am excited to see how much it lays as you can see in my pics the rear on mine isnt done yet so i am just tring to get inspired thanks
|
Re: Your 60-66 bagged projects?
|
Re: Your 60-66 bagged projects?
Quote:
|
Re: Your 60-66 bagged projects?
well, this panel was my project.
http://i46.photobucket.com/albums/f1...d_03/panel.jpg so now im looking for another one to chop and build the same as that one. in the mean time, im throwing a stepside on the panel frame. i did this pic with microsoft paint. http://i46.photobucket.com/albums/f1...ad_03/low1.jpg |
Re: Your 60-66 bagged projects?
that thing is awesome, I'm loving that setup. And I love all the pics of your old panel I saw in another thread a link u had. The setup was awesome. Good luck finding another panel and the truck is gonna be awesome I have no doubt about it.
|
Re: Your 60-66 bagged projects?
Hey SADPNL
here an old photo shopped pic of my junkpile might get ya stoked up for a low stepper and its chopped too , Looks SIIIICKK wheres my sawzall???? http://pic20.picturetrail.com/VOL159...7/68585252.jpg |
Re: Your 60-66 bagged projects?
|
Re: Your 60-66 bagged projects?
:aiiet: Here are a few more...
My other truck...http://i65.photobucket.com/albums/h211/rjm_sadler/5.jpg re-stepping the frame 1http://i65.photobucket.com/albums/h211/rjm_sadler/3.jpg re-stepping the frame 2http://i65.photobucket.com/albums/h211/rjm_sadler/4.jpg re-stepping the frame 3http://i65.photobucket.com/albums/h211/rjm_sadler/6.jpg new ride height, note cig dor comparisonhttp://i65.photobucket.com/albums/h211/rjm_sadler/2.jpg |
Re: Your 60-66 bagged projects?
A front shot for nowhttp://i65.photobucket.com/albums/h2...2150617101.jpg
|
Re: Your 60-66 bagged projects?
Just so you know...
I have less then $1500 into this truck. I bought it for $600, fixed the broken starter switch and it fired right up. i have seen the front dropmember set up, and after looking at how it was made(unbeliveably awesome!!!!)I decided to make my own. I just cant justify spending more then $600 at a time on my truck , and the last purchase was drop spindles and disc brake conversion. If anyone wants to know how I am doing it on a buget, just ask, it is not that difficult, you just have to be very resourceful!:cool: |
Re: Your 60-66 bagged projects?
prerunnerrob do you have some more pics of your truck that thing is sick the look you have is the one i am going for alsoslammed to the max!!!
|
Re: Your 60-66 bagged projects?
Quote:
Which part of SJ you in BTW? -Andy |
Re: Your 60-66 bagged projects?
I live downtown by Taylor and 7th street, and my shop is not too far off. Fell free to ask any questions, I will try to help you as best I can.
|
Re: Your 60-66 bagged projects?
Quote:
I am currently "between trucks" as i got rid of my '70 and started looking for, probably a '63 so i've been hanging around on here reading up on stuff. There seem to be a lot of 60-66 guys in SJ. |
Re: Your 60-66 bagged projects?
Quote:
|
Re: Your 60-66 bagged projects?
Quote:
:metal: |
Re: Your 60-66 bagged projects?
1 Attachment(s)
I seen this truck at viva but I got the picture off of the OSR forum.
|
Re: Your 60-66 bagged projects?
yall got some great lookin trucks i would love to hear how you doin it on a budget thats the way im gonna have to roll on mine wana get started soon on the dropfigure i should get it done before i start the body work right now i got about 800 bucks to start the bags and notches where is a good place to get bags set up and what do you recomend for size of the bags and compresses and tanks?
|
Re: Your 60-66 bagged projects?
Quote:
|
Re: Your 60-66 bagged projects?
2 Attachment(s)
here's a few photochops.... ChoppedDroppedPanel may recognize this photo.:cool:
|
Re: Your 60-66 bagged projects?
19GMC63 - I like that man. i have a new picture of MY truck, all ratty looking, i need to get it on here to see what itd look like.
|
Re: Your 60-66 bagged projects?
yeah... post it up!
|
Re: Your 60-66 bagged projects?
|
Re: Your 60-66 bagged projects?
5 Attachment(s)
IT'S NOT A C/10, BUT IT'S A 60 CHEVY, JUST GOT IT BAGGED :metal: :metal:
|
Re: Your 60-66 bagged projects?
1 Attachment(s)
:cool:
|
Re: Your 60-66 bagged projects?
sick car!!!!!!!
|
Re: Your 60-66 bagged projects?
Quote:
You running a EDC ?? John |
Re: Your 60-66 bagged projects?
Wicked car
dude , look closer hes got two comps in the middle of the trunk |
Re: Your 60-66 bagged projects?
I hope to have mine bagged soon lol
|
Re: Your 60-66 bagged projects?
daym some nice setups you guys got, still contemplating if I want to bag mine...think that will be last if I do...want to do the interior and get some new wheels and WW's...
|
Re: Your 60-66 bagged projects?
Sawzall time..........
Pics soon........ |
Re: Your 60-66 bagged projects?
Slammed66,
Lets see the progress pics! I'm waiting to get my new Art Strongarms this week. I hate waiting on the UPs man. Then I'll post some pics of mine. I also got some 20's with tires for $400.00. I want 22's but couldn't pass up the cheap price. Now I need to sell my 17's centerlines. |
Re: Your 60-66 bagged projects?
Layinrocker65,
How did you bag the back of your truck? Do you have any pics? Also did you do a Z or crossmember section? Looks good on the ground! Tony from Norcal |
Re: Your 60-66 bagged projects?
I will get some pics for ya 64shortc10 we will lower mine in a few weeks to set if up for air ride ill take and put them up as soon as we do it :cool:
|
Re: Your 60-66 bagged projects?
I think he meant me and Ill have some serious updates by the weekend....
But you better damn post some progress that unibody unit will be damn cool. |
Re: Your 60-66 bagged projects?
Ya dude i forgot our names are the same lol my bad ok i sure will i just wish it would stop raining everytime we got to work on my truck ill be working onit today so ill gets some pics if we make any progress on the bed.
|
All times are GMT -4. The time now is 11:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com