86 GMC, Porterbuilt Mild front and rear
 

Figured I would finally post what I have been working on. The story goes that I bought my 86 GMC while on leave in 2009. It sat in my fathers garage for the next year until I could come back and get it. When I did get back, I did a mild build on it which included a Mcgaughy's 4/6 drop with big brakes, 20/22" Coy C5's, and a 5.3L/4L60E swap. I drove daily for a few months before getting deployed again and then it sat once at my fathers house. Fast forward to late 2012 and a separation from the Corps and it's build time! Attachment 1213707

Attachment 1213708
So for the second go around, I decided to run a Porterbuilt Mild dropmember front and rear. I built a cammed 6.0 LQ9, Performabuilt Stage 2 trans, 3.73 gears with eaton tru trac. I figured I would post some of the issues I have run into as well, mainly steering linkage and headers.

Attachment 1213713
Attachment 1213714

Re: 86 GMC, Porterbuilt Mild front and rear
 

A few build pictures
Attachment 1213721
Attachment 1213722
Attachment 1213723

Re: 86 GMC, Porterbuilt Mild front and rear
 

More build, 6.0L, raised bed floor with liner.
Attachment 1213724

Attachment 1213725

Attachment 1213726

Attachment 1213728

Re: 86 GMC, Porterbuilt Mild front and rear
 

Fabbed ECM mount. Headers are Hedman Muscle rod. I had to notch the dropmember to get the correct angles for the steering. The drivers side header has the front tube rerouted to clear the joints.
Attachment 1213729

Attachment 1213730

Attachment 1213731

Re: 86 GMC, Porterbuilt Mild front and rear
 

Looks sick , will nice to see more of it

Re: 86 GMC, Porterbuilt Mild front and rear
 

Love it!

Re: 86 GMC, Porterbuilt Mild front and rear
 

sweet build bro!

Re: 86 GMC, Porterbuilt Mild front and rear
 

Thanks guys! Really appreciate your comments

Re: 86 GMC, Porterbuilt Mild front and rear
 

Nice, I have the same year Chevy. I'm looking to drop in an Eaton True Trac as well, let me know how easy it is to install and how you like it!

Semper Fi!!

Re: 86 GMC, Porterbuilt Mild front and rear
 

I haven't had a chance to use it yet. The installation was pretty straight forward. I used a nitro gear rebuild kit and it's the stock 10 bolt. You will need a press for the bearings and an in/lb torque wrench.

Re: 86 GMC, Porterbuilt Mild front and rear
 

awesome build man im looking in to porterbuilt stuff now my self

Re: 86 GMC, Porterbuilt Mild front and rear
 

Thanks! Honestly, if I were to do it again, I would just go with the extreme version. It would be less fab and fitment issues.

Re: 86 GMC, Porterbuilt Mild front and rear
 

nice!

Re: 86 GMC, Porterbuilt Mild front and rear
 

Attachment 1227123

Attachment 1227124

Attachment 1227125

Header modified to clear steering.

Re: 86 GMC, Porterbuilt Mild front and rear
 

Headers looks good

Re: 86 GMC, Porterbuilt Mild front and rear
 

Looks good! I'd like to hear that beast.

Re: 86 GMC, Porterbuilt Mild front and rear
 

Like the look of the setup, headers fit nice, should be a real nice ride.

Re: 86 GMC, Porterbuilt Mild front and rear
 

Great looking build so far.Good job modifying the headers to bit.

Re: 86 GMC, Porterbuilt Mild front and rear
 

As soon as I can get the exhaust hooked back up, I'll get a video of it running.

Re: 86 GMC, Porterbuilt Mild front and rear
 

I sent you a PM, and was wondering if you could get a picture and maybe some info on how you modified the inner frame support for the steering shaft clearance? I'm at that point and it would be a great help.

Thanks, Wade

Re: 86 GMC, Porterbuilt Mild front and rear
 

I'm at a crossroads right now and need opinions. Should I shave and repaint the firewall? Or, make a panel to resemble the a/c heater and put some undercoating back to look kinds stock?

Re: 86 GMC, Porterbuilt Mild front and rear
 

Depends on the look your going for. I've redone so many things I've lost count. Thinking I'd be happy with it and not dough what I really wanted to do in the first place. If you like the look of a smooth newly painted firewall, do it now, or you'll be redoin it later. It's gonna be super nice either way!

Wade

Re: 86 GMC, Porterbuilt Mild front and rear
 

If it works for you I would smooth it, looks so much better.

Re: 86 GMC, Porterbuilt Mild front and rear
 

That is what I was leaning toward. I'd hate to pull the front end off to do it later. Thanks guys.

Re: 86 GMC, Porterbuilt Mild front and rear
 

Attachment 1237123

New gauges. Dakota Digital VHX silver w/ red