The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   My last hoorah...1972 K20 Cheyenne Super frame off (https://67-72chevytrucks.com/vboard/showthread.php?t=805803)

52napco 05-06-2020 09:11 PM

My last hoorah...1972 K20 Cheyenne Super frame off
 
3 Attachment(s)
I've bought quite a few trucks over the years looking for that elusive "right one" and just never found it...came close several times, have a few hoarded back and sold a couple I probably should have kept.
Anyway I came to grips that I was just going to have to restore what I wanted..wishlist was short but hard to find in a 48 year old truck.
1- Cheyenne Super
2-Original drivetrain
3-Legit truck with original spid
4-automatic trans
5-factory a/c
So the last one I bought in Lake Havasu AZ is officially the one. Doing a "driver" restoration
to still enjoy it but look good.. Unfortunately it wasn't as described but still a legit overall good truck.needs cab corners, inner and outer rockers and all 4 cab supports, so we'll do a 1 piece floor.. ds bedside is dented up to the point that I'm just replacing it with a super nice one I had and replacing front bed panel due to a few dents.
enjoy the pics, more to come..

52napco 05-06-2020 09:19 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
3 Attachment(s)
And how it looks today

52napco 05-06-2020 09:20 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
2 Attachment(s)
More pics

DeadheadNM 05-06-2020 09:34 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
Nice survivor. Please post any detail pics you can for future restorations.

57taskforce 05-06-2020 10:11 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
I’m in for this one! That’s an excellent starting point and after seeing some of your other work I’m confident this one will come out great!

52napco 05-08-2020 02:23 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
1 Attachment(s)
Floor out ready for new 1 pc floor..outer rockers were decent just all 4 cab supports shot and inner.rockers bad..Strange how the trucks rust in these places...toe kicks were perfect.

52napco 05-12-2020 10:06 AM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
2 Attachment(s)
Floor back in..going to cut the hump area out
AMD sent the low hump instead but no big deal
Got frame stripped down for blasting and engine off to
the machine shop

weim55 05-12-2020 10:51 AM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
Quote:

Originally Posted by 52napco (Post 8735093)
Floor out ready for new 1 pc floor..outer rockers were decent just all 4 cab supports shot and inner.rockers bad..Strange how the trucks rust in these places...toe kicks were perfect.

Good OUTER rockers and everything inboard rusted out ??!! I’ve been around hundreds of these trucks and I can’t say I’ve ever seen that! Must be an Arizona thing........

Steve weim55 Colorado

52napco 05-12-2020 06:09 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
Probably could have saved the floor but all the cab supports and inner rockers were toast it just makes such a cleaner job with the one piece floorm

DeadheadNM 05-12-2020 08:58 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
Quote:

Originally Posted by weim55 (Post 8737730)
Good OUTER rockers and everything inboard rusted out ??!! I’ve been around hundreds of these trucks and I can’t say I’ve ever seen that! Must be an Arizona thing........

Steve weim55 Colorado

I had a truck where the rust was confined to the inner rockers. Think wet shoes and boots with a rubber floor mat that trapped the moisture near the kickpanel and inner rocker.

davischevy 05-12-2020 09:16 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
I'm watching.

57taskforce 05-12-2020 09:21 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
Quote:

Originally Posted by weim55 (Post 8737730)
Good OUTER rockers and everything inboard rusted out ??!! I’ve been around hundreds of these trucks and I can’t say I’ve ever seen that! Must be an Arizona thing........

Steve weim55 Colorado

My K10 is like that too. The inners are rusted at the top where they spot weld to the outers. I believe Pete is right on this one, that’s about all I could figure too. The rust is from the inside out. Nice progress on the tear down!

Chevyland 05-12-2020 09:44 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
I’m in
Nice find

Chevyland 05-12-2020 10:10 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
Quote:

Originally Posted by 52napco (Post 8735093)
Floor out ready for new 1 pc floor..outer rockers were decent just all 4 cab supports shot and inner.rockers bad..Strange how the trucks rust in these places...toe kicks were perfect.

Quote:

Originally Posted by weim55 (Post 8737730)
Good OUTER rockers and everything inboard rusted out ??!! I’ve been around hundreds of these trucks and I can’t say I’ve ever seen that! Must be an Arizona thing........

Steve weim55 Colorado

I’ve had a few trucks from
Utah Montana
Look good on the outside
But
Underneath, cab supports were rusted out
I figured it was salt on roads
But otherwise, dry climates?

Ol Blue K20 05-13-2020 07:18 AM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
I'm in to watch.....

jimbosprint 05-13-2020 01:45 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
Should be a nice build. I look forward to watching the progress.

chewychevy67 05-13-2020 07:34 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
I want to see how that floor is going to fit with the rockers attached. I kind of have the same problem so I'll be watching your photos of the replacement

52napco 05-15-2020 09:06 AM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
1 Attachment(s)
Floor fit like a glove...the AMD stuff seems to work great but who knows if its not stamped in one place and marketed under various names ??? Going a different route and taking fenders, doors, hood, radiator support, and all small parts including air filter, engine brackets etc for dipping Monday...will post pics of that next week

davischevy 05-15-2020 11:31 AM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
So you have somebody that still strips parts chemically? Our chemical stripper has been gone for years.

52napco 05-16-2020 09:23 AM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
Quote:

Originally Posted by davischevy (Post 8739715)
So you have somebody that still strips parts chemically? Our chemical stripper has been gone for years.

Yes we do in Anderson SC

52napco 05-17-2020 07:49 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
1 Attachment(s)
Of the rain holds off this week my buddy will get the frame and axles blasted

52napco 05-23-2020 05:02 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
2 Attachment(s)
Got my frame back from blaster and it looks great.
Gonna use Rustoleum tractor paint.

DeadheadNM 05-23-2020 07:45 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
Is the gear ratio tag on the front axle? If so, what location? Thanks. Looks solid.

Michael D 05-24-2020 03:55 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
52napco, just curious, did your seller in havasu live on McCulloch?
I always see a lot of 67-72 trucks when I drive past his place.

52napco 05-24-2020 04:26 PM

Re: My last hoorah...1972 K20 Cheyenne Super frame off
 
1 Attachment(s)
Quote:

Originally Posted by DeadheadNM (Post 8745004)
Is the gear ratio tag on the front axle? If so, what location? Thanks. Looks solid.

Don't think the cover has been off


All times are GMT -4. The time now is 02:55 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com