Re: Restoring Rusty
1 Attachment(s)
and a peak underneath
|
Re: Restoring Rusty
5 Attachment(s)
ok so first we need to transfer the coil from the OEM dizzy to the DUI CrossFire
|
Re: Restoring Rusty
2 Attachment(s)
worth mentioning that I noticed the stock OEM distributor cap had the center hole bevled out a bit, seemed like an after the fact modification, where as the DUI CrossFire cap did not - I decided to leave the new one be, and try it the way it is
|
Re: Restoring Rusty
2 Attachment(s)
and just to be thorough and since the new cap came with a new rotor, we decided to swap those as well
white - old blue - new |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
At least it's shiny black goop!
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
one day I asked our main mechanic what was his favorite bike to work on, and he looked me straight in the face and said "STOCK, anything stock, cause if I don't know it I can look it up in the book" so right you is Mike, right you is |
Re: Restoring Rusty
4 Attachment(s)
got some new MSD(ish) spark plug wires
SF Street Fire (so gotta be good, ha ha) An MSD Brand (what in the world does that mean) USA MADE (not made in the USA mind you, but USA Made, I'm sure there's a difference) spiral wound, silicone sleeve, all the right words |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
3 Attachment(s)
So what was in the box Homes?
a bunch of wires and a bunch of rubber booties and a crimper tool that you use in your vice (now that's awesome, and the big reason I chose these) |
Re: Restoring Rusty
3 Attachment(s)
ok lets get this stuff sorted and try to make some sense out of it all
it appears there is two kinds of rubber booties, I recon the slim ones be for an HEI style dizzy and the fatter ones seem to fit my old points distributor not sure if the silver tips go with the skinny boots and the gold with the fat ones I just laid them out that way, though one fat bootie wire did have a gold tip already installed in it the bottom boot is a bit different then the rest and is for the Coil |
Re: Restoring Rusty
1 Attachment(s)
I did not see the wire sizes on the box so I laid them out in matching pairs and measured them for us
2 x 55" 2 x 48" 2 x 41" 2 x 31" 1 x coil wire |
Re: Restoring Rusty
alright so we put our Big Boy Pants on and gonna build us our first set of custom spark plug wires, here we go...
|
Re: Restoring Rusty
1 Attachment(s)
after we measure the right length (ie 26 1/2 inches for #1 and #2 wires) we cut the wire to length and strip about 1/2 inch off (hence the extra 1/2 in the total length) using their super duper crimping tool which has a side for stripping wire, I just used my box cutter knife
|
Re: Restoring Rusty
2 Attachment(s)
we used Vaseline to slip the boot on about 5" back before crimping the end on
|
Re: Restoring Rusty
2 Attachment(s)
It helps if you use needle nose pliers to bend the metal clip ends in a little bit to help the crimper before you shove it in the vice
|
Re: Restoring Rusty
1 Attachment(s)
there, not bad for the first one
|
Re: Restoring Rusty
1 Attachment(s)
and one down and seven to go...
|
Re: Restoring Rusty
Looks good! I remember the first set I did...more than a couple decades ago. No cool tools included back then, and I butchered a couple wires up pretty good. Those wires got a little short before I was done. lol
|
Re: Restoring Rusty
Quote:
http://pic100.picturetrail.com/VOL38.../412656022.jpg Quote:
|
Re: Restoring Rusty
That black "goop" is just non-conducting electrical paste. You can buy that stuff in jars/cans form most automotive stores.
I personally would veer away from those types of caps.. But hey whatever works for you. |
Re: Restoring Rusty
Looking good.
|
Re: Restoring Rusty
2 Attachment(s)
Quote:
well here's one half done |
All times are GMT -4. The time now is 11:19 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com