The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Restoring Rusty (https://67-72chevytrucks.com/vboard/showthread.php?t=645440)

Gregski 04-23-2015 08:39 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by flashed (Post 7145706)
What is a fair price to pay for a GM radio (AM/FM) from a 74 truck ? I know where one is in a yard but its a ways off (60 miles each way) and I have no way of knowing if it works .They were high on everything else so I didnt ask but I would like to have it if I get back that way.

I paid $16 bucks for this one, non stock, and apparently NOT working! just got done testing it

Titomars 04-23-2015 09:02 PM

Re: Restoring Rusty
 
When I was looking at putting a Delco AM/FM cassette stereo radio back in mine, I was expecting to pay anywhere from $30 to $100. As the weeks went by everything suitable I could find was upwards of $150+. I came to realize even if I found a great working unit I still had no way to listen to my music. See I had dumped my cassettes years ago. going with a retro-aftermarket was more my speed and only cost $210 after a discount I had. Now I can listen to my music via Flash drive or I-pod. If I want to add a remote C/D changer later I can. But honestly I have not missed the C/D capability at all which I thought I would.

Slonaker 04-23-2015 09:30 PM

Re: Restoring Rusty
 
You should be able to mount those 4X10 speakers in the cab corners by using a set of factory brackets from an 80s Silverado (test fit the brackets in a 70s truck before you leave the yard...). Alternatively, you can buy a set of Jeff's 6X9 brackets from 73-87.com. They will sound better than the 4x10s.

Slonaker

Gregski 04-24-2015 01:14 AM

Re: Restoring Rusty
 
1 Attachment(s)
ok, so how would you wire up this bad boy, it has the following wires

Red
Yellow
Black
Black
White
Black

Gregski 04-24-2015 01:21 AM

Re: Restoring Rusty
 
well after some trial and error I figured it out, and in doing so I can now explain why after wiring up all those car radios to house speakers back in the 80s still has me confused to this day

Red - this is switched power
Yellow - this is speaker wire for one side (L or R I forget which)
Black - this is ground speaker wire (don't matter which side)
Black - this is ground speaker wire (don't matter which side)
White - this is speaker wire for the other side (L or R I forget which)
Black - this is ground for the radio

What had me confused is the yellow wire, I thought it was also a power wire, but you got to remember back in the early 80s this radio had no pre sets, it had no memory, it had no clock, so no need to keep a constant voltage, so the yellow wire was simply the other speaker wire, I kept scratching my head going how do they get stereo out of two black wires and one white wire, and then I tried the yellow as a speaker wire and whalla we had tunes

but I must say I like the simplicity of this box, red = positive, black = negative, there are no yellow power wires, there are no blue tooth jobies and antena retractor wires, and cancel the radio while on the phone crap, etc...

Gregski 04-24-2015 01:24 AM

Re: Restoring Rusty
 
so GOOD news the radio works, it plays music, the BAD news the dial does not slide left or right as you turn the knob to change stations, now you can still change stations with the knob but the needle don't move, so peaked inside and sure enuff that guitar string looking band is broken, gonna try an electronic hobby store tomorrow to see if they take pity on me and help me out

in the meantime I am kicking myself for getting too excited when I found this gem and not testing it before pulling it out of that truck, I mean you don't need power to turn the dial Greg, you could have just turned the knob and watched the mechanical needle more or not move, so keep that in mind fellers, play with these things before you buy 'em

cnorth 04-24-2015 09:19 AM

Re: Restoring Rusty
 
Man I wish the yards around me had that many squares to choose from.... lucky gregski

enaberif 04-24-2015 09:21 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by Gregski (Post 7146130)
well after some trial and error I figured it out, and in doing so I can now explain why after wiring up all those car radios to house speakers back in the 80s still has me confused to this day

Red - this is switched power
Yellow - this is speaker wire for one side (L or R I forget which)
Black - this is ground speaker wire (don't matter which side)
Black - this is ground speaker wire (don't matter which side)
White - this is speaker wire for the other side (L or R I forget which)
Black - this is ground for the radio

What had me confused is the yellow wire, I thought it was also a power wire, but you got to remember back in the early 80s this radio had no pre sets, it had no memory, it had no clock, so no need to keep a constant voltage, so the yellow wire was simply the other speaker wire, I kept scratching my head going how do they get stereo out of two black wires and one white wire, and then I tried the yellow as a speaker wire and whalla we had tunes

but I must say I like the simplicity of this box, red = positive, black = negative, there are no yellow power wires, there are no blue tooth jobies and antena retractor wires, and cancel the radio while on the phone crap, etc...

Working on stuff like this and our trucks really makes one appreciate the simplicity of vehicles that were made in these eras. Vehicles these days are so crammed together and difficult to diagnose or work on its just nuts.

A radio that requires a single power lead... :crazy:

greg64 04-24-2015 02:51 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by enaberif (Post 7146343)
Working on stuff like this and our trucks really makes one appreciate the simplicity of vehicles that were made in these eras. Vehicles these days are so crammed together and difficult to diagnose or work on its just nuts.

A radio that requires a single power lead... :crazy:

X2! That's part of why I like old vehicles. Style is the second.

Titomars 04-24-2015 04:49 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by greg64 (Post 7146833)
X2! That's part of why I like old vehicles. Style is the second.

Style for me first. Detroit has not made a good looking car since the mid 80's
If it has a carb I am good. Computers belong on a desk not in my vehicles. Yes I know I'll get slammed for that but I am an old guy who watched the muscle cars grow up and die off. I lived the era when Detroit built excitement not appliances! ;)

rusty76 04-24-2015 07:37 PM

Re: Restoring Rusty
 
Nice finds. My uncle had the same radio in his truck eons ago. Funny I remember listening to Johnny Cash on 8 track in his truck.

Gregski 04-25-2015 11:09 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by Titomars (Post 7146943)
Computers belong on a desk not in my vehicles.

I love that and I concur, and by the way I am an IT Geek by day.

Titomars 04-25-2015 11:50 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by rusty76 (Post 7147104)
Nice finds. My uncle had the same radio in his truck eons ago. Funny I remember listening to Johnny Cash on 8 track in his truck.

8-tracks and Johnny Cash, boy that takes me back.

Titomars 04-25-2015 11:53 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by Gregski (Post 7147799)
I love that and I concur, and by the way I am an IT Geek by day.

I say that same thing over on the Jeep forums and I get slammed every time!!!
It is refreshing to see some one who agrees and is an IT to boot..... right on!:metal:

Gregski 04-25-2015 03:43 PM

Re: Restoring Rusty
 
3 Attachment(s)
so I decided to take advantage of the FREE admission to the junk yards this weekend and exchange that AUDIOVOX (broken dial needle) for a much more period correct Delco, AM/FM Stereo with Ccaasseettee (man I could never spell that word right, it's like Missiissippii) LOL

I found her in this there 77 Suburban that was so twisted up in the front no wonder nobody yanked the radio, the front seat was almost touching the bottom of the dash, but The Greg took his time and got her out

... but she had no knobs so we went on searchin

Gregski 04-25-2015 03:45 PM

Re: Restoring Rusty
 
2 Attachment(s)
couple rows over we came across an '85 dually that I decided to effectionally call the Cocaine truck, man the entire cab looks like a dozen flour bags blew up in there, all covered in white

hey, what ever man, I'm just here for the radio knobs, LOL

68Timber 04-25-2015 04:34 PM

Re: Restoring Rusty
 
Nice score. They were still using that radio at least up to 1983, I had one with that radio way back when.

enaberif 04-25-2015 04:47 PM

Re: Restoring Rusty
 
That is the exact radio I have/had in my truck.

Titomars 04-25-2015 05:30 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by Gregski (Post 7148076)
couple rows over we came across an '85 dually that I decided to effectionally call the Cocaine truck, man the entire cab looks like a dozen flour bags blew up in there, all covered in white

hey, what ever man, I'm just here for the radio knobs, LOL

Technically those knobs are not period correct to your 74. If you care about such things. the correct knobs would match your headlight knob.

That was one of my problems with putting a Delco back in mine. I am the anal type that would only do so if I had the correct knobs. Guess what I could not find any the weren't an arm and a leg to buy.
I also took advantage of the member sale too. I scored a cherry painted front bumper for mine off of a 75 LWB stepside.

Gregski 04-25-2015 05:51 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by Titomars (Post 7148173)
Technically those knobs are not period correct to your 74. If you care about such things. the correct knobs would match your headlight knob.

Well shark tails, I was fine till you had to go and point that out, LOL, jk, my analism has limits, I guess cause I am fine with it, hee hee

Gregski 04-25-2015 05:55 PM

Re: Restoring Rusty
 
1 Attachment(s)
ok so test fitted the radio to make sure it physically fits and it do, and I also hooked it all up temporarily and it works, well I only get two FM stations but it plays music

then I go to unplug the thing to take it back out for a proper cleanin' and realized the genius over here forgot to hook up the antenna, so that's why only two stations came in - LOL man I still get too excited when working with radios what's wrong with me

Gregski 04-25-2015 05:58 PM

Re: Restoring Rusty
 
3 Attachment(s)
and as luck would have it the plugs are different so this can't be just a plug and pray, and even the pins be different so I can't do my regular trick where I just repin the connectors (old pins are female new pins are male and the radio is female too)

and you know me I will not cut the original harness, so I put some blade connectors on the back of my new connector to slide right in to the old factory connector (got all that)

this will work if not just for testing

Titomars 04-25-2015 05:59 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by Gregski (Post 7148193)
Well shark tails, I was fine till you had to go and point that out, LOL, jk, my analism has limits, I guess cause I am fine with it, hee hee

Well it sure does look good in its new home!! For me personally I loved the 70's knobs but hated the 80's knobs. Just something about black and chrome LOL

Gregski 04-25-2015 06:01 PM

Re: Restoring Rusty
 
3 Attachment(s)
well lets take a closer look at that beauty

Gregski 04-25-2015 06:05 PM

Re: Restoring Rusty - Delco AM FM Stereo Cassette
 
1 Attachment(s)
aint you gonna tell us about all them purdy wires stickin' out the back

BLACK POWER CONNECTOR

WHITE FRONT SPEAKER CONNECTOR

BLUE REAR SPEAKER CONNECTOR

Gregski 04-25-2015 06:06 PM

Re: Restoring Rusty
 
1 Attachment(s)
cool, but lets take a deeper dive

BLACK POWER CONNECTOR

Red - snipped missing in the pic

Yellow - Power Rebel? (hey man that's what it says on the wire) I assume switched power source

Black - Ground

Gray - Lamp

Gregski 04-25-2015 06:11 PM

Re: Restoring Rusty
 
1 Attachment(s)
WHITE FRONT SPEAKER CONNECTOR

White - Right Common

Gray - Right Front

Brown - Left Common

Green - Left Front

* honestly I don't know what they mean by common maybe someone can learn us

Gregski 04-25-2015 06:14 PM

Re: Restoring Rusty
 
1 Attachment(s)
BLUE REAR SPEAKER CONNECTOR

White - Right Common

Orange - Right Rear

Brown - Left Common

Purple - Left Rear

Gregski 04-25-2015 06:18 PM

Re: Restoring Rusty
 
1 Attachment(s)
wait what? you had the radio installed, you said it worked, then you took it back out and took it all apart, what gives?

first of all taking things apart is cool - no argument there

second I wanted to clean things more better

and C, the AM - FM slider jobbie was refusing to slide, so we must fix it

ait then, go fer it!

greg64 04-25-2015 08:06 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by Titomars (Post 7148207)
Well it sure does look good in its new home!! For me personally I loved the 70's knobs but hated the 80's knobs. Just something about black and chrome LOL

I'm with you on that. I really like the 70s black knobs with white print. I don't much care for the 80s knobs.

Gregski, "common" is similar to ground, but those speaker wires aren't actually grounded. They are common to the front and rear speakers. Most audio stuff isn't grounded at more than one point, to cut down on noise.

Gregski 04-28-2015 02:36 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by Chaplain (Post 7151428)
Can't let this thread float to the bottom.

Thanks man, here's a quick update, I am broke, waiting for pay day! LOL also The Canadians Are Coming! our aunt and uncle are visiting for a week from Vancouver so I will be going dark for a week, but will hit it hard once I am refreshed and funded.

Next up is long tube headers and X pipe upgrade stay classy squarebodies!

Titomars 04-28-2015 03:05 PM

Re: Restoring Rusty
 
What !!!! I have to go through Rusty & Greg withdraws???? :haha:
Seriously Have a great time with the family and see you when you're ready.

Gregski 04-28-2015 04:50 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by Chaplain (Post 7152038)
Family first...Is this the rich aunt and uncle?

Hmmm, well they are both retired, no kids, travel a lot... maybe __________

Gregski 04-28-2015 07:27 PM

Re: Restoring Rusty
 
Manny you missed the Alternator? page 11 I think

Quote:

Originally Posted by MannyDantyla (Post 7144181)
I've enjoyed reading this thread and have learned A LOT! from Greg and everyone who has helped him.

In fact! I knew that I would use this thread as a reference for my own build. And I thought that I should catalog the location within this huge thread of all the topics, so that I could look them up later to see how to fix things.

And, I figured, I might was well share :) I know it's outrageous, but here it is:

air cleaner: 7, 11, 43
blower motor: 4, 5, 7
body work: 13, 47-52
brakes: 38, 39, 40, 44, 45, 47, 55, 58
bumpers: 1
carb: 5, 17, 18, 19, 46
clutch: 27, 28
clutch fork: 34
clutch linkage: 30, 47
clutch pedal: 29, 30, 31
dipstick: 6
distributor: 12, 14, 20
door panels: 20, 21, 37
drive shaft: 30, 31
exhaust: 1, 8
fan shroud: 23, 24
flywheel: 27
frame: 5, 61
freeze plugs: 6, 7, 8
fuel problem: 43, 44, 45, 46
gauges: 2
gas tank: 12, 13
headers: 8, 11
headlights: 56
ignition: 53, 54
inner fender: 4
intake manifold: 14, 15, 18, 19, 46, 50
locks: 21
kick panels: 21, 22, 23
main seal: 27, 28
oil pan: 6, 27
oil pump: 6
power steering: 58, 59, 60, 61
radiator: 7
reverse light: 57
speedometer cable: 34, 38, 39, 41
starter: 7
steering column: 54, 58
stereo: 63
tachometer: 41
thermostat: 14, 18
transmission: 26, 31, 33, 34
transmission controlled spark system: 6, 10
turn signals: 58
u-joints: 35, 36
valvues: 48
windows: 38
window seals: 37


greg64 04-28-2015 08:33 PM

Re: Restoring Rusty
 
Greg, have a great time with your family. I used to live in Vancouver. Maybe Rusty and Dusty can post in your absence...

CodyWorks 04-30-2015 10:27 PM

Re: Restoring Rusty
 
Waiting on Rusty to post some updates while the Greg is out of town. I may be having withdrawals.

Gregski 05-01-2015 12:24 AM

An Update From Rusty By Rusty
 
What's up you'all Rusty here, figure I give you an update while The Greg cleans the house for the Canadians to show up, you know him, a bucket of water and some paper towels...

How did I log in to his account, well he leaves his password on a sticky under the keyboard, duh

Anyway I'm just sitting there in the driveway leaking oil so I got to entertain myself some how

Watched him wash the stupid electric Nissan Leaf right in front of my face, he never washed me like that, see if I start on the first try for him ever again, no just kidding the dude is cool

don't tell him I told you but next month is The Greg's birthday the 25th I recon, poor dude is always eating steak off a paper plate on his B day cause they go camping for Memorial Day weekend each year, for once he would like to eat off a real plate with metal knife and fork

what else, I hear I'm getting a new exhaust next month, don't think I need it, the LMC Truck one I got suits me just fine but what the heck, also I spied a new (used) gauge cluster with one of them Tack-O-Meters in it I think he said, an electric oil gauge and something called a Volt Milimeter, so what ever that is

what else oh yeah, love the new radio, AM, FM, Stereo, Cassette can you believe it, what will they think of next?

shoot here he comes, gotta go... hey whats with this Incognito Window... ???

be good to your trucks you'all

P.S. The Leaf aint even got a radio with a cassette

Guilty-by-Design 05-01-2015 12:36 AM

Re: Restoring Rusty
 
Thanks for the update Rusty ;)

greg64 05-01-2015 08:27 AM

Re: Restoring Rusty
 
Good job, Rusty. :lol: Sorry about your leak...

Oh, and don't worry about the stupid Leaf, you'll still be running when the Leaf's battery pack packs it in.

Rich84 05-01-2015 08:44 AM

Re: Restoring Rusty
 
Don't worry ..we all start leaking a little over 40.


All times are GMT -4. The time now is 06:02 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com