Parting out a 62 c10
 

This is my brother's truck, located in Marion, NC. He bought it to get the motor and transmission, so everything else is up for grabs. Slight cab and bed damage from being used to break the fall of a rather large tree. :lol:

If you want something, just let me know. PM me and I can give you his contact info.

Rear bumper sold
Front bumper sold
Dash sold
Driver door glass sold
Passenger vent window glass sold
Wiper arms sold
Heater contols sold
Rearview mirror sold
Window cranks sold
Rear bumper brackets sold
West Coast mirrors sold
Torsion bar bolt (1) sold
Heater delete plates sold
Torsion keys sold

Still have these good parts: wiper and side cowl pieces, grill, seat, gas tank, heater, other small bits...just ask

Re: Parting out a 62 c10
 

Hell it will buff out!

Re: Parting out a 62 c10
 

I hope the tree is okay.
Posted via Mobile Device

Re: Parting out a 62 c10
 

That's what I tried it tell him ;)

Reminds me of the Andy Griffith show and Barney's new car...

Barney:
"Here's one for a fixer-upper.
1949 Hudson terraplane.
Was fallen on last saturday by a 30-ton semi-trailer.
Lots of miles left in the rubber."
Posted via Mobile Device

Re: Parting out a 62 c10
 

Here are some pics. Hood is rough around the corners with rust, not sure if its worth it to anyone. Cowl and cowl corners look good. Interior pieces are pretty good as well with what appears to be a factory cut hole for a clock? My brother said someone had put an oil gauge in its place, but the hole looks too clean clean not to be factory.

Re: Parting out a 62 c10
 

A few more pics.

Re: Parting out a 62 c10
 

Last of what he sent me.

Re: Parting out a 62 c10
 

How's the driver door glass? Looks like it may be ok in the pic. If it is, I am interested in it and the passenger side vent window glass if it is good. Thanks :gmc2:

Re: Parting out a 62 c10
 

Driver's door glass and passenger vent glass are both ok. I'll get you a price.

Re: Parting out a 62 c10
 

How about the heater switches and all their cables and stuff?

Also, rear view mirror? I have one but it's loose as heck. A bump throws it out of wack.

All headed to 78757.

Re: Parting out a 62 c10
 

Also, I guess I should ask how the turn signal mechanism is that runs from the arm to the switch down in the steering column?

Thanks,
Scott

Re: Parting out a 62 c10
 

I'm looking for a clutch pedal and actuator arm. The teeth on mine are stripped. Please let me know if you have one. Would appreciate pics and what you'd ask shipped to 90815. Thanks!
Posted via Mobile Device

Re: Parting out a 62 c10
 

I'll get my bro to get some pics for you ASAP.

Re: Parting out a 62 c10
 

rear end wouldnt happen to be posi ? thx

Re: Parting out a 62 c10
 

I'll find out for ya!
Posted via Mobile Device

Re: Parting out a 62 c10
 

Any update on the gauge cluster?

Re: Parting out a 62 c10
 

Complete steering column including wheel to 95672? Maybe a couple more pics of it.
Posted via Mobile Device

Re: Parting out a 62 c10
 

Just looked closer was that column a shifter column (auto or manual)? If so does anyone know how hard it is to remove or plug up the hole?
Posted via Mobile Device

Re: Parting out a 62 c10
 

Pics for you. Teeth are in good shape.

Email/call my bro to discuss price with him.

Re: Parting out a 62 c10
 

It was a column shift at one time I think. Just talked to my brother and he might end up using the column on another project so it might be on the hold list for now.

Re: Parting out a 62 c10
 

Ok thanks.
Posted via Mobile Device

Re: Parting out a 62 c10
 

If your brother or the poster above me passes, I need the sleeve that picks up the shoulder/bolt to attach the bottom of the column to the steering box shaft...maybe called a steering coupler ?
The shop lost mine!
Going to 01821
Thanks!

Re: Parting out a 62 c10
 

Will put you in line if my bro don't use it!

Does anyone know for sure if the interior parts for a 62 are interchangeable with a 63? I'm thinking yes, but want to confirm it.

Re: Parting out a 62 c10
 

Thanks!
I think most would interchange, although I believe some underdash stuff might differ
Posted via Mobile Device

Re: Parting out a 62 c10
 

Thanks Blue Blood. Specifically looking at the gauges, heater controls and ash tray. I think that stuff is the same from all the pics I've seen.
Posted via Mobile Device