Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
2 Attachment(s)
Quote:
|
Re: Restoring Rusty
2 Attachment(s)
and here's another look at then and now
Note: the crinkle in the front bumper is from using a yellow tow strap to pull the truck home one night when it wouldn't start, nothing a 2x4 and a floor jack won't bend back out My registration may be coming up here soon, so who here thinks I should punt on the rusty old blue license plates and get shinny brand new white ones? |
Re: Restoring Rusty
ok so the goal for this month is to actually fix some things before doing any more cosmetic stuff ie painting or fun stuff ie lowering the truck, so here is our short to do list:
1. fix rear brakes (see sister thread Tires Squel When I Brake - Why?) 2. replace or fix left headlight 3. fix left rear turn signal 4. check out the lifter / rocker arm ticking noise 5. refresh the power steering 6. fix hazard signals 7. get the AM radio working (yeah baby AM mono!) |
Re: Restoring Rusty
Looking good!
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
All seem like do-able goals for a month! Truck is coming right along and looking good.
|
Re: Restoring Rusty
Like night and day, Gregski. Keep up the awesome work. :c2:
|
Re: Restoring Rusty
2 Attachment(s)
so got the ball rolling with all new rear brake components, drums, shoes, and hardware from PepBoys, went there to have my old drums turned and it turned out there was not enough meat on them so had to get new ones
the ProStop hardware kit did not include all of the replacement springs, not end of the world, but a bit disappointing (three springs are not included for each side) |
Re: Restoring Rusty - Rear Brakes
2 Attachment(s)
as always we clean the old parts before re using them, and there is a good reason for that, keep scrolling (LOL)
one side still dirty, the other already cleaned |
Re: Restoring Rusty
4 Attachment(s)
by cleaning the old parts we can see markings on them, sometimes those markings are part numbers sometimes they are clues for which side of the vehicle the part goes on, Right or Left for example
in this case we see two parts below both from the Driver's side yet one is marked "R" whilst the other bears an "L" in this case the first part which I dubbed the Dog Bone (LOL) is on the wrong side, someone swapped these two parts and put them on the wrong side |
Re: Restoring Rusty
3 Attachment(s)
cleaned and gooped the three contact points per shoe where the shoes rub against the backing plate ~ when these squeak your wife will let you know about it, jk so it don't hurt to prevent that from happening
I must say I am not a fan of drum brake assemblage it seems to me as though someone took a dozen of automotive engineers, gave them a brown bag of random bits, bicycle handlebars, a fork, a wrench, a couple different sized slinkys, some large diameter pipe, etc. etc. and said you are not allowed to leave this room until you build some DRUM BRAKES out of all these bits !!! so cleaned, lubed up, and reassembled |
Re: Restoring Rusty
If I remember right those little springs they dont include are not real cheap but you gotta have em.Keep up the good work ,everything is looking great .
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
WAIT!
Your shoes are not in the correct place. The small one(s) face front, the large one(s) face rear. This is because they are self-energizing brakes, and the smaller front shoe is merely to help apply the larger rear shoe using the rotation of the drum. |
Re: Restoring Rusty
Quote:
Get this kit. http://www.harborfreight.com/3-piece...kit-97804.html I found the pliers to be darn close to useless except for the spring tool on the end of one handle. The star wheel spoon was not that useful till I sharpened the end with a bench grinder... Not actually sharp but no longer 3/16" thick at the business end. They are nice to have for drum brakes. |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Measure their LENGTH; they are different front-and-back.
|
Re: Restoring Rusty
Great progress, Greg. The guys are right about the shoes; the longer shoe goes to the rear.
|
Re: Restoring Rusty
Nice work as usual. In honor of you I dunks some parts in muriatic acid today.
BTW keep the blue, vintage, California tag. |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
by the way if you need to start you truck still and the ignition rack is broke, use pliers to pull the rod that attaches to the rack. itll still start. i had to do that to drive mine for a while
|
Re: Restoring Rusty
Quote:
|
All times are GMT -4. The time now is 02:25 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com