Re: my 1955 chevy truck
 

1 more

Re: my 1955 chevy truck
 

thanks man im geting close to ripin it apart and painting the frame. then i can start final assembly on the frame. i think im thru the woods on the frame now comes the body :dohh:

Re: my 1955 chevy truck
 

That is looking awesome! Very nice work you have going on there!

Re: my 1955 chevy truck
 

started making the coupling for the york halfway there

Re: my 1955 chevy truck
 

Very cool. I was thinking of installing one of these for some air horns on my truck.

Re: my 1955 chevy truck
 

Your truck is looking Great, nice and low. couple of questions on your frame notch, what size is the steel you used to make it, and also how long are your upper and lower link bars, i am trying to figure out my rear end setup and i am getting different answers on how long to make the bars for a trianglated 4 link from the various forums. thanks

Re: my 1955 chevy truck
 

im pretty sure i used 1x2 1/4 wall on the c notch. whatever the top width of the frame is i used so i could still box over it and i doubled the thickness for the side.ill measure it when im home and let u know.I researched more of the 4x4 links to get a idea of what to run and how they work because the set up is way more imporant on them. if i did it again i would fab my own out of 2x2 1/4 wall and mount the bags on the bars mid-way down. that gives a better ride and u get more travel. live and learn ask a lot of questions and go with ur gut. the link set up i bought was on ebay cant remember the length but i wana say 32". hope i didnt confuse u more good luck.

Re: my 1955 chevy truck
 

making some headway on the compressor slow but steady. now for some clean up and paint :metal:

Re: my 1955 chevy truck
 

Very cool!

Re: my 1955 chevy truck
 

ok guys im back! time to dig out the truck and get back to it.

Re: my 1955 chevy truck
 

It's about time.
Kim

Re: my 1955 chevy truck
 

Re: my 1955 chevy truck
 

rear end is in paint

Re: my 1955 chevy truck
 

Looks good.
Kim

Re: my 1955 chevy truck
 

assembly has begun!!! :metal:

Re: my 1955 chevy truck
 

any reason you built the crossmember to go under the driveshaft?

Re: my 1955 chevy truck
 

ya it seemed easyer than above for clearance when the bags were out. the crossmember would have been higher than the top of the frame to clear the drive shaft. i didnt want to have to notch anything.

Re: my 1955 chevy truck
 

:uhmk:frame is complete and out for blast and paint stay tuned for a assembly session coming soon:uhmk:

Re: my 1955 chevy truck
 

Ok it's been a while!! I made some progress on the frame and assembly has begun. I'll post some more pics as this progress but here's where im at rt now.
Posted via Mobile Device
Posted via Mobile Device

Re: my 1955 chevy truck
 

Re: my 1955 chevy truck
 

here we go

Re: my 1955 chevy truck
 

Nice teaser pic of the frame. We need more.
Kim

Re: my 1955 chevy truck
 

got all the air lines finished up last nt :metal:

Re: my 1955 chevy truck
 

Looks good.
Kim

Re: my 1955 chevy truck
 

Here's one with the brake lines in Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device