The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)

- - IN 1980 Chevy k5 part out cheyenne (https://67-72chevytrucks.com/vboard/showthread.php?t=835556)

1980 Chevy k5 part out cheyenne

-motor mounts - $10
-1985 k5 blazer frame - $200 - not pictured
-matching red/burgundy seat belts - $45
-4x4 high hump $20
-gauage cluster - $20
-dashpad/bezel - $20
-wheels/tires ( 31x10.50.15 on 6 lug 15x10 $175 - pending
-squarebody 6 lug front/rear axles, total of 2 front, 2 rear axles available
- chrome rear bumper 81-87;91 - $85 - not pictured yet
-hinges - $5 ea

Pix
Posted via Mobile Device

Re: 1980 Chevy k5 part out cheyenne

Are you selling the tilt column?

Rick

Re: 1980 Chevy k5 part out cheyenne

I will take all the interior trim pieces and the rear tailgate power window dash switch if so equipped.

And if possible do you have photos of both front male seatbelt pieces?

Steve

Re: 1980 Chevy k5 part out cheyenne

Quote:

Originally Posted by Keeks2915 (Post 9092936)

I will take all the interior trim pieces and the rear tailgate power window dash switch if so equipped.

And if possible do you have photos of both front male seatbelt pieces?

Steve

Sorry the rear tailgate switch was all jacked up. Will PM you.

Quote:

Originally Posted by Hammered 77 (Post 9092665)

Are you selling the tilt column?

Rick

Rick, I am not sure yet, I have 2x other tilt columns from the 80s if that helps.

Posting more pix...

Re: 1980 Chevy k5 part out cheyenne

Just a heads up, those aren't OEM mats. They were made by Plasticolor and sold through auto parts stores like Pep Boys

Re: 1980 Chevy k5 part out cheyenne

ah! thanks for the heads up, my grandpa has the same ones and always thought they were OEM, GM let plasticolor use the chevy part? wow. Will update description. Thank you.

Re: 1980 Chevy k5 part out cheyenne

Not sure how the licensing worked back then by Plasticolor. They made ones that said GMC, Chevy, Blazer, Ford, Jeep, Keep On Truckin, Budweiser, s10, Camaro, Mustang and more

Re: 1980 Chevy k5 part out cheyenne

There was also Yosemite Sam, the Tazmanian Devil, Do it in the Dirt, AMC, VW Rabbit, almost anything you can imagine that was popular at the time made by Plasticolor. They also did most of the same logos on mudflaps

Re: 1980 Chevy k5 part out cheyenne

Ya I googling them, thanks so much for the correction!

Re: 1980 Chevy k5 part out cheyenne

Would you be interested in selling the cruise control off the steering column?

Re: 1980 Chevy k5 part out cheyenne

Quote:

Originally Posted by 73kay (Post 9092527)

Used - Good
I am parting out a 1980 k5 blazer. body has good amount of rust, have title if someone wants to really restore it, otherwise part out. k5 tailgate is ok shape with one rust spot, it has the glass in it, but missing cover. Seats for this are amazing no tears, just a some clean up and you are g2g. Seats sides fwd/back, back adjust fwd/rear. Rear seat is in perfect shape. Volume discount available. I got lots of odds and ends that can grab as well. Hate to scrap some good sheet metal, so come cut up some patch panels to save your rigs.

-sm465 4 speed tranny (4x4) $200
-np205 transfer case $200
(tranny/xfer case combo: $350

-front red/burgundy bucket seats - $150
-rear matching bench seat w/ hardware $150
-matching red/burgundy seat belts - $45
full seat set combo: $275

-manual tranny pedal assembly + z bar w/ lmc hemispherical joints - $75
-4x4 high hump $20
-master cylinder $15
-blazer interior trim (Cheyenne/silverado) - $35
-blazer top w/ sliding windows $50
-gauage cluster - $20
-dashpad/bezel - $20
-misc patch panels - $10 ea
-wheels/tires $200 ( 31x10.50.15 on 6 lug 15x10
-4x4 power steering gear $10 - not pictured yet
-motor mounts - $10 - not pictured yet
-lift kit 6in -$85 - see wheel pix
-1985 k5 blazer frame - $200 - not pictured
-12 bolt axles (3.07 gear front/rear gov lock) $250 for the set, $100 per axle
-10 bolt axles (3.08 from 85 k5 blazer front+rear, new wheel seals) $250 for the set, $100 per axle
- chrome rear bumper 81-87;91 - $85 - not pictured yet
-k5 blazer tailgate $ 100 - a little rust on the outside, but clean, has windshield as well
-hinges - $5 ea
-blue chevy floor mats $100
-
Posted via Mobile Device

As mentioned, I will take the white interior pieces. Please message me best way to get your money and to coordinate . Thanks Steve

Quote:

Originally Posted by Keeks2915 (Post 9093615)

As mentioned, I will take the white interior pieces. Please message me best way to get your money and to coordinate . Thanks Steve

Steve. PMd you.
Posted via Mobile Device

Re: 1980 Chevy k5 part out cheyenne

Are you still at $100 on the mats? Any damage or tears?

Re: 1980 Chevy k5 part out cheyenne

No tears. Pretty firm on price for the moment. Thanks!

Re: 1980 Chevy k5 part out cheyenne

Heater controls for sale?

Thanks, Scott

Re: 1980 Chevy k5 part out cheyenne

Quote:

Originally Posted by 73kay (Post 9095148)

No tears. Pretty firm on price for the moment. Thanks!

I'll take the mats at $100. I'll be down your way on the 6th and 7th of July so can pick them up. Please PM how you'd like me to pay you.
Thanks

Re: 1980 Chevy k5 part out cheyenne

Is there a factory spare wheel/tire?
Posted via Mobile Device

Re: 1980 Chevy k5 part out cheyenne

Quote:

Originally Posted by chev-obsession (Post 9095833)

Is there a factory spare wheel/tire?
Posted via Mobile Device

No.

Quote:

Originally Posted by Willowrun (Post 9095810)

I'll take the mats at $100. I'll be down your way on the 6th and 7th of July so can pick them up. Please PM how you'd like me to pay you.
Thanks

PM Sent.

Quote:

Originally Posted by 72 Cheyenne K20 (Post 9095755)

Heater controls for sale?

Thanks, Scott

Yes, I have both styles, let me post a pix.

Re: 1980 Chevy k5 part out cheyenne

Thanks for the pics of the heater controls. Just checked the Jimmy and it looks like I'm after the controls on the bottom of the pic. Looks like all of the mounting tabs are there. Can you please check for stress cracking around the mounting tabs and if all looks good let me know price with shipping to zip 24401. Doesn't need to be quick shipping, snail mail is fine.

Thanks, Scott