The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)

- - K5 crossmembers? (https://67-72chevytrucks.com/vboard/showthread.php?t=721373)

DBear

10-29-2016 11:29 PM

K5 crossmembers?

1 Attachment(s)

Seen this pic on another thread, so hope nobody gets offended. There are 2 crossmembers in the transfer case area.....wasn't sure what they are there for, thought there was only one, but in the pic there are 2.

DBear

10-29-2016 11:40 PM

Re: K5 crossmembers?

I am thinking the one in the rear is just for the skid plate???

DeadheadNM

10-29-2016 11:52 PM

Re: K5 crossmembers?

Quote:

Originally Posted by DBear (Post 7755765)

I am thinking the one in the rear is just for the skid plate???

Yes

DBear

10-30-2016 12:30 AM

Re: K5 crossmembers?

Thanks bud

DeadheadNM

10-30-2016 10:50 AM

Re: K5 crossmembers?

You bet!

swyfor5

11-01-2016 01:29 AM

Re: K5 crossmembers?

4 Attachment(s)

Had a stock t-case skidplate and the extra crossmember here, but went with this setup. Way cleaner look, I think.Attachment 1586073

Attachment 1586074

Attachment 1586075

Attachment 1586078

70GM	12-21-2019 07:35 PM

Re: K5 crossmembers?

Is your photo of a stock skid plate? I am trying to figure out a way to replicate what you are showing in the photo.

Tmend

04-15-2021 11:54 PM

Re: K5 crossmembers?

Quote:

Originally Posted by swyfor5 (Post 7757607)

Had a stock t-case skidplate and the extra crossmember here, but went with this setup. Way cleaner look, I think.Attachment 1586073

Attachment 1586074

Attachment 1586075

Attachment 1586078

This is a long shot but hoping you can share make of skid plate. I have same on my 72 I believe and trying to figure it out. Thanks much

truckster

04-16-2021 04:15 PM

Re: K5 crossmembers?

Quote:

Originally Posted by swyfor5 (Post 7757607)

Had a stock t-case skidplate and the extra crossmember here, but went with this setup. Way cleaner look, I think.Attachment 1586073

I never even thought of that. I like it. I think it would make exhaust a little simpler too.

DeadheadNM

04-16-2021 04:59 PM

Re: K5 crossmembers?

The skid plate in post #6 looks like the Hickey style, which is reproduced: https://www.ebay.com/itm/Hickey-NP20...AAAOSwTuJYwKrx

Tmend

04-16-2021 07:50 PM

Re: K5 crossmembers?

Quote:

Originally Posted by DeadheadNM (Post 8909327)

The skid plate in post #6 looks like the Hickey style, which is reproduced: https://www.ebay.com/itm/Hickey-NP20...AAAOSwTuJYwKrx

Just saw it sir, yea mine does not have any cuts a an angle like the one listed on eBay. Thanks much I didn’t catch that on this one on this thread good eye

All times are GMT -4. The time now is 01:17 AM.