Re: Restoring Rusty
3 Attachment(s)
these gaps are horrible, there is no way we can take this truck fishin' like this
|
Re: Restoring Rusty
3 Attachment(s)
and the front of the door
|
Re: Restoring Rusty
1 Attachment(s)
so the passenger door had to come off
used a floor jack to hold it up and removed it as a one man job, no problem, a bit heavy but you can do it by yourself |
Re: Restoring Rusty
3 Attachment(s)
then it was time to massage the hinges, at first it appears as if they are the same just one is mounted upside down, but after closer examination the top one has two star gears to help prop the door open using that metal S spring
top one - two bolts up / one bolt down bottom one - one bolt up / two bolts down |
Re: Restoring Rusty
5 Attachment(s)
to get the hinges apart you need to remove the pins, to get the pins out (they is pinched on the bottom) you need to grind the pinched metal with a hand file or cut / sacrefice the pin
I was able to take the pin out on the top hinge like so |
Re: Restoring Rusty
2 Attachment(s)
the top pin I could spin with my fingers the bottom pin would not budge not even with vice grips, this made grinding the pinches with a hand file impossible so I had to use the death wheel to cut this pin in half
I figure I would use new pins anyways so why put in the effort to get them out in one piece I am not sure if the pins ought to spin freely or not, maybe someone with more experience can comment on that |
Re: Restoring Rusty
1 Attachment(s)
I'm sure many of you have heard me rant about the Dorman aftermarket replacement parts, and how I prefer to avoid them, I specifically heard to stay away from their door hinge pin and bushing sets so although I would prefer the OEM type, I wanted instant gratification and got these from NAPA, hopefully they aint Dorman in disquise
right off the bat the new replacement bushings seem shorter than the stock ones |
Re: Restoring Rusty
I like the rack. Smart cookie.
|
Re: Restoring Rusty
Quote:
I prefer the units that have E clips or threads and Nylok nuts to prevent the pins from backing out rather than just depending on friction at knurled areas on the shaft alone. The bushings are sintered bronze or iron. They'll break up pretty easy if you beat em in with a hammer. I use washers, nut, and bolt to pull them in. If you oil them a couple times a year the bushings will be just fine. |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
looks like it's going to be 100° F today and for the next five days, Awesome... Not! |
Re: Restoring Rusty
I plan on building racks similar to your so I can haul 20' lengths of steel. I will likely have an extension over the cab.
However, I would place the cross bar lower, so the posts stick up above the cross bar to help keep things UP and not fall down. Gives you something to tie stuff against. For Kayaks, though, it probably doesn't matter. |
Re: Restoring Rusty
Take pics once you get the kayak up on it. I want to see it.
|
Re: Restoring Rusty
2 Attachment(s)
found some rust under the doors, which was expected, fortunately its just surface rust
so a short dance with the wire wheel followed by a paper towel acid bath and we will be ready for primer in no time P.S. got a call from my buddy Lucifer he asked if I wanted to come down to his place to cool off today, (day 2 of over 100° F streak) |
Re: Restoring Rusty
I would think Lucifer's place would be much hotter.
|
Re: Restoring Rusty
Do like progress!
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
4 Attachment(s)
Quote:
|
Re: Restoring Rusty
4 Attachment(s)
in the front I use the holes in the purches to hold the tie downs, in the rear I had to bolt back up the hooks I removed when I first got the truck, lol, but this time I mounted them underneath, these are temporary and will do for now, ie this trip
|
Re: Restoring Rusty
3 Attachment(s)
now back to the door hinges, here they are off the truck, I wasn't going to let one missing bushing prevent me from taking these pics after it went missing, of course I found it as soon as the pics were taken, ha ha
I can't believe how I loose things all the time, its as if there was someone hiding in my garage just pranking me all the time |
Re: Restoring Rusty
1 Attachment(s)
and a mandatory old door hinge pin and old pushings along side a new pin and new bushings
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
3 Attachment(s)
and new bushes going in (not sure what these are made of - some orangy stuff) with a liberal coat of white lightning bacon grease
the top one slid it beautifully... |
Re: Restoring Rusty
1 Attachment(s)
the bottom one was a bit shy
|
Re: Restoring Rusty
1 Attachment(s)
had to use a rat tail file to open up the hole a bit (GM gods forbid I had a proper sized drill bit) to have used that instead, and made guick job of it
|
Re: Restoring Rusty
and wouldn't you know it, the door still sags as it did before, so once I again I fixed things not needin' fixin, I recon my old bushes was fine, it was just hinges that needed proper adjusting - and still do, I bet the fender needs to come off for that type of action, fun level = 2
|
Re: Restoring Rusty
3 Attachment(s)
now there are things that need doin', things you ought to be doin', things that need to be fixed, things that you oughta fix... BUT THAN THERE's things you WANT to do
|
Re: Restoring Rusty
3 Attachment(s)
hey, what ever, works for me
|
Re: Restoring Rusty
4 Attachment(s)
Yup I finally decided this truck suffers from TMG
Too Much Green |
Re: Restoring Rusty
I say leave the one stripe and don't do another lol. Also if you want to save your doors spray some lubrication oil down the insides.
The doors normally rust from inside out because of bad window seals at the top. |
Re: Restoring Rusty
Nice! I like the single stripe a lot.
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
4 Attachment(s)
I will likely be shunned from Gregskis build and the forum for all eternity for posting these pictures of my daily driver but I will risk it we are like brothers Gregski!
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
5 Attachment(s)
removed the door striker pin (came out much easier than expected with that torques star screw thingie, I thought I was gonna strip it fer sure) so that it would not interfere with the door alignmentability
with it worn the way it be, it's time fer a new one soon |
Re: Restoring Rusty
4 Attachment(s)
also cleaned the door crusty locking latch the best I could with it still being on the truck ie in the door, some scrapping with a flat screw driver followed by a steel brush and some denatured alcohol and brake cleaner and then some chain lube and finally some white lightning grease
to be honest whichu all though the door still aint aligned perfect what used to take two attempts to shut the door now takes no effort at all, before after the first attempt I could pull on the door and it would open 1 inch every time, I have no idea how that worked, ha ha, but than on the second time it would shut proper, try telling your teenage kid that sequence of operation and you get, never mind dad I'll ride with mum, ha ha |
Re: Restoring Rusty
1 Attachment(s)
ok I ain't sure how accurate this iPhone GPS based Dynolicious app is but here's some numbers fer you all
0-60 in 7.06 seconds (pronounced respectable) 1/4 mile in 14.70 seconds at 97.7 MPH (we can do better) 116.5 MPH Top Speed (don't tell the wife) |
Re: Restoring Rusty
Looks like that door has been mis-aligned for a while.
I read somewhere about someone using ABS tubing to replace the plastic sleeve on the striker pin. Can't find it now... |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
All times are GMT -4. The time now is 02:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com