Re: Restoring Rusty
1 Attachment(s)
Quote:
So I am leaning towards this Mr. Gasket Flat BLACK one - seen em fer $25 on eBay filter included, maybe a gray or a black filter would be wicket too thank you all for reading and commenting, appreciate the input |
Re: Restoring Rusty
After seeing the difference, I would never run without induction pre-heat if I was ever going to drive in the cold. The engine really wants to see 90-100 degree inlet air. In Sac you may get away with it.
|
Re: Restoring Rusty
Ditch the Caddy air cleaner. Looks great on a 50's custom, and Caddys, but that's about it. As always, great progress!
|
Re: Restoring Rusty
I like the 14in air cleaner you posted better than the Caddy one personally.
|
Re: Restoring Rusty
You can send me the Caddy air cleaner and I'll put it to good use for ya.....hehehehe. I like'em personally but sometimes they work and they don't. I do kinda like it.....Though a 14 incher would look better probably...grrr.
|
Re: Restoring Rusty
not a fan of the caddy one, but hey to each his own
|
Re: Restoring Rusty
I think this banjo fitting will work on your Holley and it has a 3/8" hose connection.
http://www.summitracing.com/parts/aed-5427 As I was saying earlier, you could put the filter right before the fuel pump. |
Re: Restoring Rusty
I prefer the flat black open air filter. Keep up the great work, I really enjoy this thread.
|
Re: Restoring Rusty
Updates, UpDaTeS, updates ...
thank you all for reading |
Re: Restoring Rusty - Bungee
2 Attachment(s)
first I want to show off this Polish Engineering custom 32" door opener, this is how you roll if your door hinge spring broke, see earlier posts
I am using a red bungee but I am sure other colors may work as well, please color coordinate accordingly, LOL I have a dream: that some day I will have a long flat drive way, hee hee |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty - Kick Panels
4 Attachment(s)
well I took my own advice and walked away from that pesky driver side kick panel and after a couple days gave it another try, and low and behold I manged to will her out, complements of a long flat screw driver
didn't even have to remove the parking brake, though I got her out of the hole with the brake disengaged, and pulled her all the way out with it engaged brains over brawn (this time... LOL) |
Re: Restoring Rusty - Driver Side Kick Panel
4 Attachment(s)
now what you may notice is that the driver side kick panel was a bit brittle on the bottom, and that had me worried, but as it turns out after a simple trim with some scissors there was plenty of meat on it to save it
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
1 Attachment(s)
the gasket around the air vent valve now that's another story, for some reason the one on the passenger side may be saveable but the one on the driver side parished
unless I am reading that wrong LMC Truck wants $30 bucks for just the air vent valve, page 94 http://www.lmctruck.com/icatalog/cc/full.aspx?Page=94 ... they gotta at least kiss you first! jk |
Re: Restoring Rusty
2 Attachment(s)
ok so here is the look at the evil twins side by side, they will also be getting the Dupli-Color or Dupa-Color as I like to call it (for my Polish Brethren) stain treatment like the door panels did
we'll see how they turn out |
Re: Restoring Rusty
4 Attachment(s)
OK, so I went a little crazy on the interior today, (taking things apart is just so much fun, oh look that's only held on with three screws...) and decided to remove the visors as well, I justified it by thinking, hey if I am painting the kick panels I might as well paint these too, I am not a big fan of storing already sprayed / used aerosole cans (even after flipping them upside down to clear the valve properly, I just prefer a fresh can)
|
Re: Restoring Rusty
4 Attachment(s)
I know this is boring, but stay with me now...
here they are side by side before and after the bucket of plain water and paper towel treatment I think I will try to find a better passenger side visor as this one may be passed it already, and I can get past the mold? but its got that crease in it and it's torn a bit |
Re: Restoring Rusty
3 Attachment(s)
ok enuff of that girlie interior stuff... what I really wanted to do today is warm up to the big Valentine's Day three day weekend big job (rear main oil seal replacement) by cleaning the radiator shroud a bit, I just got tired of looking over it / passed it at that shinny carburetor it just wasn't working for me
|
Re: Restoring Rusty- Radiator Shroud
2 Attachment(s)
in case you were wondering, and I was, if the radiator shroud can come out without taking the fan out, it can (brilliant and proper engineering)
the radiator shroud is held in with two 3/8th screws on top and two metal clips on the bottom (one of mine was broken, good to know I will pick one up at the junkyard this weekend) removing this solid piece was simple and easy and did I mention I love working on this truck, this shroud is hefty and sturdy as well |
Re: Restoring Rusty
4 Attachment(s)
ok you got it out now what?
Geez, don't rush me, like a true artist, one must pause and admire the blank canvas, ok I had to go grab another beer ok, (had to buy me some time) |
Re: Restoring Rusty
Only half way through your forum so far, but wanted to say that you've inspired me and have me really excited to get working on my old stepside. Sadly, it's still the middle of winter and Old Blue is hibernating for the time being. But you're doing some great work here.
|
Re: Restoring Rusty
Quote:
hey regarding your '79 Trans Am did you happen to "take the restrictor plate off to give the Red Dragon a little more juice. But it's not exactly street legal, so [you're] keeping it on the down low." |
Re: Restoring Rusty
4 Attachment(s)
here we go...
what's that baby? Did I grab the dish soap? No, you know that's why I don't do dishes it dries my sensitive hands! |
All times are GMT -4. The time now is 02:52 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com