The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Restoring Rusty (https://67-72chevytrucks.com/vboard/showthread.php?t=645440)

Gregski 03-02-2016 01:03 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by y5mgisi (Post 7505233)
Why did I read Trans-a-mission like Johnny Cash in one piece at a time?

cause you are AWESOME!

lkfldredneck 03-02-2016 11:07 PM

Re: Restoring Rusty
 
Good job Greg! i remember motor removals and installs, except in old classic wooden boats. Just be glad you dont have wiring harnesses ontop of harnesses etc. etc. That makes it 10 times more of a headache

y5mgisi 03-02-2016 11:50 PM

Re: Restoring Rusty
 
Hooray! Lol and while that may be, I'm surely not as awesome as Gregski! This thread is one of my all time favorites.

Gregski 03-03-2016 12:35 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by y5mgisi (Post 7507391)
Hooray! Lol and while that may be, I'm surely not as awesome as Gregski! This thread is one of my all time favorites.

oh my, Encouragement!

Gregski 03-03-2016 12:43 AM

Re: Restoring Rusty
 
3 Attachment(s)
Day 2 of disassembly, we join the action already in progress...

in order to get the carb off we disconnect the throttle cable and the four studs, and into the bin she goes

Gregski 03-03-2016 12:44 AM

Re: Restoring Rusty
 
1 Attachment(s)
next we disconnect the brake booster vacuum hose from the fitting on the intake manifold

Gregski 03-03-2016 12:44 AM

Re: Restoring Rusty
 
1 Attachment(s)
lets not forget the oil pressure sensor

Gregski 03-03-2016 12:46 AM

Re: Restoring Rusty
 
1 Attachment(s)
we remove the spark plugs and bag and tag them, even if these old ones aint going back in, we may need them to fill the holes while we paint the heads, etc.

Gregski 03-03-2016 12:47 AM

Re: Restoring Rusty
 
3 Attachment(s)
the header bolts were up next, man that one behind #8 plug is always loose, lol

Valarius_Starchaser 03-03-2016 12:52 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by Gregski (Post 7502531)
Sweet, so I'll represent the West and you represent the South, and if two more guys join we'll have our very own tournament bracket NCAA basketball style, LOL

If this snow will go away I can represent the midwest conference keep on keepin on Gregski you never stop making me laugh

Gregski 03-03-2016 01:21 AM

Re: Restoring Rusty
 
1 Attachment(s)
decided to remove the alternator

Gregski 03-03-2016 01:22 AM

Re: Restoring Rusty
 
1 Attachment(s)
also removed the heater hoses and the radiator hoses, and put them away nice and neat on the shelf

Gregski 03-03-2016 01:24 AM

Re: Restoring Rusty
 
2 Attachment(s)
unbolted the power steering pump from the block but left the hoses connected to the steering box

Gregski 03-03-2016 01:26 AM

Re: Restoring Rusty
 
1 Attachment(s)
don't forget to disconnect the fuel line from the fuel pump

Gregski 03-03-2016 01:27 AM

Re: Restoring Rusty
 
1 Attachment(s)
removed the belts and one of them was shot, the other ok, but I will be replacing both

Gregski 03-03-2016 01:28 AM

Re: Restoring Rusty
 
Then it was time to remove the radiator core support...

Gregski 03-03-2016 01:31 AM

Re: Restoring Rusty
 
5 Attachment(s)
started out by removing the wiring harness that runs across the top from the driver side to the passenger side

don't forget the grounds, there is one by each one of the headlights, and one on the frame rail

Gregski 03-03-2016 01:33 AM

Re: Restoring Rusty
 
1 Attachment(s)
I think this is a brake sensor that needs disconnecting

Gregski 03-03-2016 01:35 AM

Re: Restoring Rusty
 
2 Attachment(s)
don't forget to disconnect the horn

Gregski 03-03-2016 01:41 AM

Re: Restoring Rusty
 
3 Attachment(s)
I removed the headlight bezels because there are two hidden bolts hidden way up high under there

I think 7 bolts hold the radiator support to each fender, now there are 3 additional bolts that hold it underneath to the inner fender, but 7 go from the inside out to each fender

Gregski 03-03-2016 01:48 AM

Re: Restoring Rusty
 
2 Attachment(s)
removed the front turn signals to reveal the bolts hidden behind there too

Gregski 03-03-2016 01:51 AM

Re: Restoring Rusty
 
1 Attachment(s)
I wanted to remove the front section as much in one piece as possible, but decided to remove the lower grille panel to get access to hidden fasteners

it was held on by 8 bolts, two in the middle and three on each end, like so

Gregski 03-03-2016 01:52 AM

Re: Restoring Rusty
 
4 Attachment(s)
removed the brackets that hold the lower grille panel to the main radiator support section

Gregski 03-03-2016 01:57 AM

Re: Restoring Rusty
 
1 Attachment(s)
removed the overflow tank so I wouldn't damage it, when I had to lift the radiator support out by myself

Gregski 03-03-2016 02:01 AM

Re: Restoring Rusty
 
4 Attachment(s)
then it was time to undo the two large bolts that hold the radiator support to the frame


All times are GMT -4. The time now is 08:44 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com