The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Restoring Rusty (https://67-72chevytrucks.com/vboard/showthread.php?t=645440)

Gregski 03-14-2016 02:04 AM

Re: Restoring Rusty #1 Cylinder Chamber
 
Quote:

Originally Posted by chevybuldr (Post 7521691)
A good quality shop will not rip you off on parts. They make more money with you returning as a happy customer. Also they have to show you your parts that are no good when you ask. There are a lot of crooks out there, but there are also a lot of good quality shops out there. Call around and ask how much it costs to check out a set of heads. It would be my guess though that the exhaust valves will need to be replaced.

I did, $150 to check them out, so if they are bad and I don't want to move forward its $150 down the toilet.

chevybuldr 03-14-2016 02:06 AM

Re: Restoring Rusty #1 Cylinder Chamber
 
Quote:

Originally Posted by Gregski (Post 7521711)
I did, $150 to check them out, so if they are bad and I don't want to move forward its $150 down the toilet.

Wow 150 thats crazy money. We get 50-75.00 to check a set of heads.

Gregski 03-14-2016 02:11 AM

Re: Restoring Rusty #1 Cylinder Chamber
 
Quote:

Originally Posted by chevybuldr (Post 7521712)
Wow 150 thats crazy money. We get 50-75.00 to check a set of heads.

Looks like you are in Cali too, so I am wondering what does that entail for $50 bucks? In my case they get hot tanked and washed and magnafluxed and disassembled.

chevybuldr 03-14-2016 02:15 AM

Re: Restoring Rusty
 
In our shop the heads get disassembled and degreased. Valves are cleaned and checked for wear. Good valves are refaced. the heads are magnufluxed for cracks and seats and guides are checked. Springs are checked for pressure. Then you get an estimate.

MikeB 03-14-2016 07:33 PM

Re: Restoring Rusty #1 Cylinder Chamber
 
Quote:

Originally Posted by Gregski (Post 7521634)
Noooooooooooooooooooooooo

Not uncommon. I suspect lots of 97-2002 1/2 ton trucks on the road have hairline cracks like yours, but my machinist tells me the vast majority of them don't have symptoms. That said, I wouldn't put a dime in them, nor would he.

rusty76 03-14-2016 09:10 PM

Re: Restoring Rusty
 
Crap

y5mgisi 03-14-2016 10:26 PM

Re: Restoring Rusty
 
Dang it!

Gregski 03-14-2016 11:44 PM

Re: Restoring Rusty
 
4 Attachment(s)
well after a quick trip out of town for some replacement Vortec heads turned out fruitless, I started on the OG Heads Autopsy, I should have know just from this text from the seller, after I asked him for some pictures and a part number since the ad had neither of those things, he wrote and I quote:

"If I'm going to worry about sending pictures and finding cast number I'm going to want more than $50 for the set"

he followed that up with a pic from 50 feet away of the heads with valve covers on them, LOL

Gotta Love Craigslist [/sarcasm]

alright so the Oirignal heads go on the work bench and the disassembly comences, getting these valves out was a bear as the retainers were gunked up in there for good, but The Greg persevered

Gregski 03-14-2016 11:48 PM

Re: Restoring Rusty
 
5 Attachment(s)
cleaned up the #1 chamber for a closer looksie - for 42 years of age, these looked spectacular

Gregski 03-14-2016 11:51 PM

Re: Restoring Rusty
 
4 Attachment(s)
I was blown away when I cleaned up the OG exhaust valve, it was in more better shape than his Vortec grandson, it could use a 30* Back Cut to remove the inner lip on the back of the valve wouldn't you say?

Gregski 03-15-2016 12:30 AM

Re: Restoring Rusty
 
4 Attachment(s)
I is learnin that the intake valves always look a better than the exhaust, and this OG intake is no exception, nice metal

enaberif 03-15-2016 12:33 AM

Re: Restoring Rusty
 
Sir ... It looks like that one valve maybe bent.. Might want to either replace or check those lol.

Gregski 03-15-2016 12:33 AM

Re: Restoring Rusty
 
2 Attachment(s)
and here's how the magic happens, a quick tour of a state of the art valve cleaning facility

make sure you are using a high pressure fuel line and not some cheap vacuum hose, no just kidding it don't matter

Gregski 03-15-2016 12:34 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by enaberif (Post 7522937)
Sir ... It looks like that one valve maybe bent.. Might want to either replace or check those lol.

these are from the old cylinder heads that will live on a garage shelf - we be cleaning them just for fun

Gregski 03-15-2016 12:41 AM

Re: Restoring Rusty - Chevy On The Rocks!
 
4 Attachment(s)
alright you suffered enuff, so let me leave you with this Old Timmers Engine Tunning Trick from back in the day

lets say you got an engine that is running just right temp wise, or maybe a bit too cool, and you want her to run hotter, maybe even overheat, here's what works like a charm

pop one of them cylinder heads off real quick like and gently and carefully insert a small rock or pepple inside any of the water jackets / openings, I prefer somewhere closer to the back of the engine say between the #5 and #7 cylinders

took a pic of that peice next to a spark plug so you can see how big it needs to be

after a quick hug with a magnet turns out it was actually metal


68post 03-15-2016 12:57 AM

Re: Restoring Rusty
 
Unidentified Floating Object ???????

enaberif 03-15-2016 01:02 AM

Re: Restoring Rusty
 
lol that would be a breakdown of metal from various engine parts getting stuck and clogging passages.

that much foreign material is pretty scary.

Gregski 03-15-2016 01:16 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by 68post (Post 7522969)
Unidentified Floating Object ???????

lol wonder what option code that was

68post 03-15-2016 01:25 AM

Re: Restoring Rusty
 
0u812

Gregski 03-15-2016 10:42 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by 68post (Post 7522993)
0u812

lol, 5150

Gregski 03-15-2016 11:27 PM

Re: Restoring Rusty - Vortec Cylinder Head Hunt
 
2 Attachment(s)
went out in search of another Vortec cylinder head today

second pic (what can I say it's not my first Rodeo)

Gregski 03-15-2016 11:33 PM

Re: Restoring Rusty
 
5 Attachment(s)
spotted a beautiful 1999 Chevrolet Suburban down in the meadow by the creek. Judging from her antlers she couldn't have more than 247,472 miles on it, ha ha , so what's another 50,000 right? (Sometimes I thank the GM gods for Chevys being behind the times still using analog odometers, just imagine if it was digital we could not tell the mileage.)

someone already did some of the heavy lifting for me, since they took the passenger side head

pulling this head off made me remember my '97 Tahoe and how I dreaded working under the hood, just look at that mess

Gregski 03-15-2016 11:39 PM

Re: Restoring Rusty
 
5 Attachment(s)
so after confirming the right GM part number 122558062 I locked her in my sights, took a deep breath and pulled the trigger, she was coming home with me today

don't mind the water in the valve train or the cylinder bores we had a storm for a few days and there were things under the hood with rain water in them that I knocked over climbing in and out of the engine bay

Gregski 03-15-2016 11:42 PM

Re: Restoring Rusty
 
4 Attachment(s)
for reference I took pictures of both the intake and exhaust gaskers

FEL-PRO 98000 Intake Manifold Gasket

GM 12550033 Exhaust Manifold Gasket

(they would not allow me to keep the gaskets for free so that I would buy the same ones, no biggie, a picture's worth a thousand words)

Gregski 03-15-2016 11:45 PM

Re: Restoring Rusty
 
2 Attachment(s)
and into the shopping cart she went

Time Spent - 2 hours that included walking the yard, about 8 rows of trucks etc


All times are GMT -4. The time now is 07:04 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com