Re: Restoring Rusty
2 Attachment(s)
and some close ups of that bad boy
oh man and that perfect speaker wire, only fits one way, dummy proof, perfect polarity every time, I just want to hug that GM engineer, thank you |
Re: Restoring Rusty
3 Attachment(s)
stop teasing us Greg and shows us that darn radio man
hey watch your tone (get it, LOL... tone) |
Re: Restoring Rusty
1 Attachment(s)
you all know how much I love anatomy shots, so here it is the complete mind blowing low fidelity "entertainment" system circa 1974
I swear I heard the radio come on for a second when I tested it at the battery and play ".... another one bites the dust... another one bites the dust!" |
Re: Restoring Rusty - Help Me Fix My Radio
3 Attachment(s)
ok, so it's out and it's not working, now what?
|
Re: Restoring Rusty
Greg, I'm not sure how to advise you. Electrical troubleshooting is a different kettle of fish than mechanical troubleshooting. It might just be a connection problem, or a bad solder joint, but there's lots of other possibilities.
A while back, I came across a retired guy on eBay who fixes and sells radios like yours. Maybe that's something to consider. Here's one of his ads. Upgrade time? http://www.ebay.com/itm/Working-1980...e3fb3c&vxp=mtr |
Re: Restoring Rusty
Are you repairing the original AM radio? I'm diggin that idea, and hearing it do some monaural jam on Exile through a new 4x10.:metal:
|
Re: Restoring Rusty
LOL that stereo is filthy! I can't say if its stock to my truck or not but my truck (1974) has a AM/FM/Tape deck in it.
|
Re: Restoring Rusty
Man, me thinks Gregski's truck was once an off roader by the layer of dust in that radio. That amount of dust can kill radios. My Jeep goes through stereos about once every 2 years. I personally would look for something in an upgrade.
|
Re: Restoring Rusty
Greg, if you do get the radio working again, I saw a neat adapter a while back that you insert into the antenna wire. This allows any modern source to be hooked up, and it plays through the stock radio. Pretty neat.
|
Re: Restoring Rusty
I put one of these in my 77. I was not going to cut my perfect unaltered dash.
http://www.classicindustries.com/pro...ts/te605b.html I used this speaker setup for the front. http://www.classicindustries.com/pro...rts/s5013.html I already had a very nice set of 6X9's for behind the seats. |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
That's probably the U63 Delco 41APB1 radio GM used in base trucks and some of the cars in '74.
Radio service manuals for the 1970's & 1980's radios are very hard to come by. This was right on the edge of the truly throw-away radios. The guys that did this kind of service work tend to hang onto their paper manuals and keep them "in the family" of radio enthusiasts. It's almost blasphemy to let this information outside the community. Repair of even non working units is not that difficult but re-aligning the receiver coils, if they need it, is an art and not that easy without some guidance. That being said they do show up with more regularity on Fleabay than they used to... Here's a SAMS Photofact manual for the 1974 AM/FM radios. It may be close enough if you're not frightened of older electronics. http://www.ebay.com/itm/1974-1975-CH...28488685&rt=nc EDIT: I found a 1974 Delco all GM models radio manual and bought it. I'll scan it and post it up in the manuals thread. Probably after the end of the month. If you want the paper original once I'm done we can make a deal. I've been on the lookout for these for some time and this one popped up at a reasonably inexpensive shipped price. Usually the seller seems to think they're printed with platinum ink on gold plates. |
Re: Restoring Rusty
Cool stuff, Hatzie. I bought the repair manual for my 64 off eBay. I just like this stuff.
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
I've enjoyed reading this thread and have learned A LOT! from Greg and everyone who has helped him.
In fact! I knew that I would use this thread as a reference for my own build. And I thought that I should catalog the location within this huge thread of all the topics, so that I could look them up later to see how to fix things. And, I figured, I might was well share :) I know it's outrageous, but here it is: air cleaner: 7, 11, 43 blower motor: 4, 5, 7 body work: 13, 47-52 brakes: 38, 39, 40, 44, 45, 47, 55, 58 bumpers: 1 carb: 5, 17, 18, 19, 46 clutch: 27, 28 clutch fork: 34 clutch linkage: 30, 47 clutch pedal: 29, 30, 31 dipstick: 6 distributor: 12, 14, 20 door panels: 20, 21, 37 drive shaft: 30, 31 exhaust: 1, 8 fan shroud: 23, 24 flywheel: 27 frame: 5, 61 freeze plugs: 6, 7, 8 fuel problem: 43, 44, 45, 46 gauges: 2 gas tank: 12, 13 headers: 8, 11 headlights: 56 ignition: 53, 54 inner fender: 4 intake manifold: 14, 15, 18, 19, 46, 50 locks: 21 kick panels: 21, 22, 23 main seal: 27, 28 oil pan: 6, 27 oil pump: 6 power steering: 58, 59, 60, 61 radiator: 7 reverse light: 57 speedometer cable: 34, 38, 39, 41 starter: 7 steering column: 54, 58 stereo: 63 tachometer: 41 thermostat: 14, 18 transmission: 26, 31, 33, 34 transmission controlled spark system: 6, 10 turn signals: 58 u-joints: 35, 36 valvues: 48 windows: 38 window seals: 37 |
Re: Restoring Rusty
Quote:
SUBSCRIBED! |
Re: Restoring Rusty
Quote:
gratitude G |
Re: Restoring Rusty
My stock radio still worked and did so for many years. Then I retired it but left it in the stock location. I didn't want to cut up my dash so I bought one of those Highliners years ago and installed an aftermarket stereo. Best thing I did for that truck really. One of the few mods I ever did to my truck that made a real difference. That and the CB radio. Ten four.
|
Re: Restoring Rusty
Quote:
Great idea, Manny. It seems like many guys are referring to this thread for assistance. |
Re: Restoring Rusty
Quote:
On top of all Gregski's work this guy creates an index. Incredible... Thanks. |
Re: Restoring Rusty
Dude, you could write a new service manual with all the info in this thread.
|
Re: Restoring Rusty
2 Attachment(s)
free admission at the local junk yard and 15% off, if you guys have one of these Pick N Pulls in your area (and have a free Rewards membership) why not throw some tools in a bucket and head out there and see what they got, that's where I'll be
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
2 Attachment(s)
ok, so let me walk you through what we found at the Pick N Pull
fist we found a rear view mirror (cost $6 bucks), now I wasn't really looking for one of these, but it was just laying there on the floor of this '73 pick up truck already removed, so I grabbed it I like to document where my spare bits came from |
Re: Restoring Rusty - Rear View Mirror
3 Attachment(s)
as you can see here, my old one has seen better days
|
Re: Restoring Rusty
2 Attachment(s)
next I found this lens for the gauge cluster in this '81 GMC - $13 bucks and a special thanks to the person who removed it without breaking it
|
Re: Restoring Rusty
3 Attachment(s)
ok so lets take a look at the gauge lens situation before and after, now those of you with square bodies know that they lenses tend to yellow kinda like these plastic headlights do these days
Side Note: by the way the Greg played the game of trying to buff out discolored plastic headlights before on multiple occasions and he wasn't going to waste time and money on trying it on the this lens as its hours with the drill vs 41 years of mother nature, we don't stand a chance fellers |
Re: Restoring Rusty
3 Attachment(s)
so lets compare the old to the new lens, by the way a brand new replacement lens from LMC truck will run you about $50 bucks
|
Re: Restoring Rusty
4 Attachment(s)
and here's what the new(er) lens looks like on the truck
it's not perfect, but it's an improvement, when I have the moneys I may replace it for a new one, or go with different gauges all together, stay tuned Now I can clearly tell that my Ammeter and Fuel Gauge don't work!!! hee hee |
Re: Restoring Rusty - Speakers
2 Attachment(s)
as my friend used to say, even a blind squirrel finds a nut sometimes, well in this case the squirrel being me, and the nut being two nuts, or two speakers
I was looking for radios all day when low and behold I look inside of this green (pronounced "gorgeous") '86 and atop of it's dash are two of these speakers, properly removed, in excellent condition, just sitting there starring at me saying well pick us up man and put us in that there bucket ... and so I did... |
Re: Restoring Rusty
1 Attachment(s)
now I am going to have to do some homework to figure out where one can install two such fine speakers in the cab of said truck, maybe one of youz can learn me, cause mine only had one speaker atop of the dash, do they go inside some fancy bulging door panels or do they live behind the bench seat in there them corners
here are the two purdy new ones and my old one |
Re: Restoring Rusty
... mirror, lens, speakers, you are killing us Smallz, did you find a replacement radio or not ???
|
Re: Restoring Rusty - AUDIOVOX C-977B
4 Attachment(s)
then I came up on a magnificent '77 pickup truck, I swung the door open, and there she was, the AUDIOVOX 8 Track Car Stereo Tape Player with AM/FM Stereo Radio
FCC DATA MODEL NO C-977B "Receiver certificated for compliance with FCC Rules Part 15" yeah baby, what ever that means, LOL and yes I have the knobs, well most of them |
Re: Restoring Rusty
HATZIE you are on the clock to find us a manual for this baby... shall we say you have 48 hours, LOL
|
Re: Restoring Rusty
What is a fair price to pay for a GM radio (AM/FM) from a 74 truck ? I know where one is in a yard but its a ways off (60 miles each way) and I have no way of knowing if it works .They were high on everything else so I didnt ask but I would like to have it if I get back that way.
|
Re: Restoring Rusty
Looks like a good junk yard!
|
All times are GMT -4. The time now is 02:53 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com