The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)

- - Dropmember rack (https://67-72chevytrucks.com/vboard/showthread.php?t=443959)

I have the power rack, getting ready to install my lines. Which port is the high pressure, which is low? Also do I have to install that brass fitting that came with the boregeson kit #925102? Which side?

Re: Dropmember rack

Quote:

Originally Posted by osaltyone (Post 4452093)

Did you purchase the power steering hose kit from me? Or straight from Borgeson? The adapter fittings Borgeson inlcudes are METRIC. Don't ask me why, we had a long discussion with them that ended with them telling me the METRIC fittings will still work with the STANDARD threads in the rack. Long story short... they don't and you will have leaks. We supply the correct fittings with the kit when purchased through us. We sell the fittings seperate for $15 each.

The smaller port will be the pressure side... this is the port that is closes to the boot on the rack. I call it the bottom one, but that could depend on how you are looking at the rack!

Nate

Re: Dropmember rack

I know this is an old thread,... but needed, for anyone running a Dropmember.
Great info here.

Re: Dropmember rack

Could we get a sticky for this?

Re: Dropmember rack

Good info! Need a PB stickie thread, :D.