The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Routing Ididit Column Wiring (https://67-72chevytrucks.com/vboard/showthread.php?t=821488)

clemsonteg 05-06-2021 10:29 AM
Routing Ididit Column Wiring
 
For those of you using an Ididit column, how did you route the wiring? It exits out of the bottom of the shift collar and I’m having a hard time routing it in a way that you don’t see it. I'm considering making a cover, but before I do that work, I wanted to see if others have routed theirs differently.

The Rocknrod 05-06-2021 03:33 PM
Re: Routing Ididit Column Wiring
 
I used something like this: https://kwikwire.com/products/techfl...ng-flat-sleeve

vin63 05-06-2021 04:11 PM
Re: Routing Ididit Column Wiring
 
1 Attachment(s)
I run an Ididit Retro column and I just routed the harness to the left side of the column, then up and over the column dash bracket mount.

vet57air 05-07-2021 08:31 PM
Re: Routing Ididit Column Wiring
 
Quote:
Originally Posted by clemsonteg (Post 8917661)
For those of you using an Ididit column, how did you route the wiring? It exits out of the bottom of the shift collar and I’m having a hard time routing it in a way that you don’t see it. I'm considering making a cover, but before I do that work, I wanted to see if others have routed theirs differently.
Mine exited on top of the column. A little hard to get at, but you don't see it.


All times are GMT -4. The time now is 07:17 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com