Tilt steering
I’m considering ididit column. I’ve talked to several tech support but some tech support say 32” and 38’? It’s for my 1966 c10 shorty with a:chevy: big window.
|
Re: Tilt steering
Greetings. I don't have an answer for you, but I think someone in the 60-66 message board would. Let's see about getting this moved over there where it will be sure to be seen by that bunch
|
Re: Tilt steering
It is moved...Hope someone here can get you your answer.
|
Re: Tilt steering
http://67-72chevytrucks.com/vboard/s...d.php?t=764270
Why not try the PVC pipe column trick I described in post #9 of this thread so you can see what suits you. Like shoes, different people need different sizes and an ididit is a big investment into your comfort and safety. You want to get it right the first time. Edit: you also need to be clear on how idid it measures their columns. Remember they have the splined stub that extends past the tube and I think it may count in the overall dimensions |
Re: Tilt steering
1 Attachment(s)
I went with Ididit's tilt, column shift retro column for the 60-66 truck and it is right at 32" end to end of the shaft. I had to position the column as close to the dash as possible. A 38-inch long column would be to long for my application (I have the factory bench seat). Be sure to measure with you sitting in your seat.
Quote:
|
Re: Tilt steering
Ididit makes a column for our trucks - Have you looked at their web site?
|
Re: Tilt steering
Ididit is a lot of money.
|
Re: Tilt steering
I did talk to a tech/rep from ididit and they said like 38” which differs from other sellers and jeg’s(tech/rep) at 32”?
|
Re: Tilt steering
Quote:
|
Re: Tilt steering
2 Attachment(s)
I got one from IDIDIT, I would say the retro fit is same length as stock with tilt. The mounts are slotted. Could be difference from tilt to non tilt as well.
|
Re: Tilt steering
So was it 32” or 36”?
|
Re: Tilt steering
I don't have length, but for a rack use Part# 1120650120
It was close if not same as 3 on tree column. |
Re: Tilt steering
So I called IDIDIT and the "box" is 35" and the "Rack" is 30"
|
Re: Tilt steering
What is a "Rack"?
|
Re: Tilt steering
1 Attachment(s)
Rack would be the other type of steering Apparatus,
|
Re: Tilt steering
The problem with old tilt compared to new tilt the new style in way better.What is the one thing you grab a hold of to pull your self mostly fat people but skinny people do it too is the steering wheel.That's why I've never liked tilts they get lose it take a little while to go in the tighten up the column
|
All times are GMT -4. The time now is 01:49 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com