Re: Restoring Rusty
I'm enjoying your diagnostics. You should send these photos to Zefal and show them what a precision instrument their tire pump turned out to be. They would probably be impressed. Or tell you that your warranty was void.
I'm hoping you find something that is easy to fix, or that you had just managed to work out an air pocket. Good luck man. |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
One of the pressure tests I typically do is to pressurize the system and run the engine. If the needle doesn't fluctuate or drop like a rock I don't usually have a problem.
You can get cooling system pressure testers from AutoZone's loaner tools. 10PSI is a little low for the radiator cap. They are usually rated for 14-16PSI. Every PSI drop is @ 4.333333°F lower boiling point. Pure water boils at 228°F at 10PSI vs 254°F at 16PSI. 50:50 Coolant:Water will raise the boiling point around 10°F. |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
It's possible. If you don't have a catch-can/overflow-bottle or the bottle is smaller than the overflow volume you're likely just blowing it out on the road.
|
Re: Restoring Rusty
1 Attachment(s)
so this morning I was thumbing through this...
it's actually a great magazine called SUPER CHEVY |
Re: Restoring Rusty
1 Attachment(s)
when I came across this...
a YOGI'S INC distributor'/reseller ad (never heard of them actually) have you guys? |
Re: Restoring Rusty
1 Attachment(s)
when I spotted this
a Northern Radiator ad, (again never heard of these guys either) |
Re: Restoring Rusty
1 Attachment(s)
which led me to this
actually a smokin' deal on an aluminum radiator for a V8 small block with a manual transmission for only $271 CORE DIMENSIONS: 28 1/4 x 17 1/8 x 2 1/4 OVERALL DIMENSIONS: 33 x 18 3/8 x 3 1/8 |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
well it's been 24 hours and the pressurized engine (block, heads, and intake manifold) are still holding 10 PSI, so I am going to order that new Northern aluminum radiator this week after I get paid, and we'll change one thing at a time till we find the source
|
Re: Restoring Rusty
If the Aluminum radiator is a good idea today it's still going to be a good idea in a couple days...
Try changing the cap to a Delco 10409635 (RC27) or STANT 10230 rated at 16PSI. The fill neck could be borked but I'd replace the cap first. It's cheap and you can always order the Aluminum radiator on Tuesday or Wednesday if you still want it. |
Re: Restoring Rusty
3 Attachment(s)
so my plastic [ahem] PVC Mityvac MV4560 coolying system pressure test kit arrived from Amazon today, they deliver on Sunday's who knew?!
$50 bucks |
Re: Restoring Rusty
1 Attachment(s)
so the first thing I did was test the radiator cap, and it holds 15 PSI easy, no leaks, hmmm
this seems like a pretty nice cheap kit for an amateur, I'm sure the metal one would be better for a many uses, but for a one time deal, it does fine |
Re: Restoring Rusty
Yogis been around a long time. Mostly known in the street rod world. Cool little you got there.
|
Re: Restoring Rusty
alright I just put a 7 PSI pressure test on the engine (heads, block, intake) chose 7 just cause it's a bear to pump that little guy up, plus 7 is in the geeen zone, so we'll see if it holds
|
Re: Restoring Rusty
Checkout Champion too, I got a 4 core monster for my 383 from them for a hell of a price, and it's a high quality radiator too.
http://www.championradiators.com/Che...ator-1973-1987 http://i.imgur.com/2zw7ZSU.jpg |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Awesome thread, I read the entire thing in anticipation of picking up an 82 SWB 2WD on Friday.
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
I have the same Wideband you do in the Miata. Super useful. |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
2 Attachment(s)
C a n dy
|
Re: Restoring Rusty
Is that your new sleeping quarters, behind the cardboard box?
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
2 Attachment(s)
mandatory stare and compare, old rad and new one, the rows in the new one are wider although both rads have two rows
|
Re: Restoring Rusty
2 Attachment(s)
gave the new aluminum radiator a quick dip, just cause it's new don't mean it will be good, sometimes they leak, this one did not
|
Re: Restoring Rusty
2 Attachment(s)
Quote:
the rubber radiator hold down thingies did not quite fit, so we improvised |
Re: Restoring Rusty
3 Attachment(s)
I can not stand the hand slicing dime a dozen hose clamps so got these T-bolt ones and love them
|
Re: Restoring Rusty
4 Attachment(s)
and here she be all installated
note the vinegar jug lives on as the overflow tank, two tone that Chip Foose - hee hee |
Re: Restoring Rusty
Quote:
Breeze Liner worm clamps will accomplish the same thing but they are around the same price and don't look near as nice. |
Re: Restoring Rusty
4 Attachment(s)
well after two years of fast at it looks like the Greg may finally be slowing down, the replacement water temp gauge arrived yesterday and I took a nap instead of installing it right quick, ha ha, that or it's hibernation season
|
Re: Restoring Rusty
1 Attachment(s)
FINALLY the Green Quartet is back together, yes they all work, and yes I am completely out of fuel, ha ha
pic taken with the key in the ON position but the truck not running just to show lightability on the gauges |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
1 Attachment(s)
I give you the world's dumbest invention, radiator hose lube, this is excellent if you want your hoses to slip off the inlet or outlet tubes no matter how tight you make the hose clamps
you can find these right next to blinker fluid at your local parts house |
Re: Restoring Rusty
Quote:
When the bead on the tube and fitting ends is properly formed and the clamps are sufficient for the task it causes ZERO problems and the hoses don't end up bonded to the fittings. If that stuff is petroleum based you will have issues. Quote:
It also gives you access to "included with Prime" movies and commercial free TV shows kinda similar to Netflix. I paid for this season of Dr Who and The Blacklist on Amazon Video but there are a lot of included videos. |
All times are GMT -4. The time now is 04:31 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com