The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Restoring Rusty (https://67-72chevytrucks.com/vboard/showthread.php?t=645440)

Gregski 09-27-2016 12:27 AM

Re: Restoring Rusty
 
1 Attachment(s)
Gentlemen I've been sitting here agonizing over my chronic exhaust leaks and I think I see the problem, take a look at this picture, don't it look like the Hooker header ports don't match the location of the ports on the L31 Vortec cylinder head?

this is the passenger side head, can you see the black square outlines and how they are all shifted over to the right about 3/16ths of an inch, all four ports are like that, as if the header was bolted up a bit too much forward and not on center of the exhaust ports

am I crazy or do you see it?

Gregski 09-27-2016 12:34 AM

Re: Restoring Rusty
 
1 Attachment(s)
the driver side is offset too but in this case it seems like this header sits about 1/8th of an inch too far back and needs to slide forward a bit for the holes to align

I don't think I can fix this by welding the bolt holes up and then re drilling them in their proper locations as it's a poor design and the holes will hit the pipes

RDrancher 09-27-2016 07:49 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by 68Timber (Post 7717662)
It looks like the flange is the problem, not the gaskets. The round flange with square gasket ports isn't giving much of seal in the corners. If you built up the corners with your welder and smoothed them with a flap disc you'd have more surface area on the gaskets all the way around.

Remember this post Gregski?

hatzie 09-27-2016 08:31 AM

Re: Restoring Rusty
 
I think I'd widen the contact area with a MIG or TIG or even my Oxy Mapp torch then file or grind or mill for flat contact.

Gregski 09-27-2016 10:10 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by RDrancher (Post 7725532)
Remember this post Gregski?

thanks I do, and I will be doing that this weekend

Gregski 09-29-2016 11:42 PM

Re: Restoring Rusty
 
Been driving the truck to work every day this week! It runs great, The Greg is so happy!

Monday - drove it in
Tuesday - drove it in
Wednesday - drove it in
Thursday - drove it in
Friday - drove it in

guys keep at it and you'll get your projects on the road if they aren't already it is such a great feeling, the sqeaks the noises the smells, ha ha

Gregski 09-29-2016 11:43 PM

Re: Restoring Rusty
 
did I mention the wife will be out of town this weekend and I have already scheduled the next Dyno Test for Tuesday October 4th the year of our Lord 2016 so I am making a list of touch ups WE need to make to make Rusty Roller Ready

1. Fix Exhaust Leak (AGAIN)

2. Replace Magnaflow mufflers with just large resonators

3. Shorten #5 spark plug wire

4. Fix/calibrate one of the AFR Oxygen Sensors

5. Eliminate transmission noise by draining a bit of fluid

6. Finish hooking up license plate light

7. Maybe try a 1" carb spacer

8. something I forget

9. misc.

10. etc.

Hewfil1 09-29-2016 11:48 PM

Re: Restoring Rusty
 
I'm excited to see the dyno results. There are none near me and being without a trailer to take my truck kind of leaves me hung out to dry.

RDrancher 09-30-2016 07:53 AM

Re: Restoring Rusty
 
Not enough bark with the Magnaflows?

Gregski 09-30-2016 09:58 AM

Re: Restoring Rusty
 
Quote:

Originally Posted by RDrancher (Post 7728936)
Not enough bark with the Magnaflows?

Correct, I need to skier little children when I drive by, ha ha

RDrancher 09-30-2016 07:25 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by Gregski (Post 7729017)
Correct, I need to skier little children when I drive by, ha ha

Then you might as well rig up the spark plug flame throwers while you're at it. I would suggest relocating the exhaust exits though. No fun when you realize that the burning smell is in fact...you. :D

Gregski 09-30-2016 07:48 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by RDrancher (Post 7729438)
Then you might as well rig up the spark plug flame throwers while you're at it. I would suggest relocating the exhaust exits though. No fun when you realize that the burning smell is in fact...you. :D

that's a good tip, pun intended

Gregski 09-30-2016 11:47 PM

Re: Restoring Rusty
 
2 Attachment(s)
here we go, first the straight edge and eyecrometer test

Gregski 09-30-2016 11:48 PM

Re: Restoring Rusty - Hooker Headers
 
3 Attachment(s)
then the build up and the grindage

Gregski 09-30-2016 11:54 PM

Re: Restoring Rusty
 
3 Attachment(s)
and now the sides

Gregski 10-01-2016 12:00 AM

Re: Restoring Rusty
 
3 Attachment(s)
and the other side, sorry some pics were taken with the header upside down

Gregski 10-01-2016 12:04 AM

Re: Restoring Rusty
 
3 Attachment(s)
then I decided to cut up the flange into three separate pieces, this is an old Hot Rodder trick passed on from generation to generation by the spinning angle grinder

so first we mark the flange with a Sharpie with surgical precision, ha ha

Gregski 10-01-2016 12:10 AM

Re: Restoring Rusty
 
4 Attachment(s)
a final look at the finished product - the passenger side Hooker header be modified

Gregski 10-01-2016 12:18 AM

Re: Restoring Rusty
 
1 Attachment(s)
then I got bored of all the grinding and decided to get rid of the Old Man Magnaflow mufflers - they just had no bite and you know Rusty needs a proper Soundtrack

laying around we had our 9 inch resonators, a bit too small but it would be criminal not to give them a go

mandatory stare and compare old vs new(ish)

Gregski 10-01-2016 12:20 AM

Re: Restoring Rusty
 
1 Attachment(s)
I give you Exhaust 6.0

Welded by the light of the moon, (no seriously I welded this up in the dark, from spare tubes, not bad at all if I do say so myself)

Gregski 10-01-2016 12:23 AM

Re: Restoring Rusty
 
1 Attachment(s)
so this...

Gregski 10-01-2016 12:24 AM

Re: Restoring Rusty
 
1 Attachment(s)
... better fix this

Wide Open 10-01-2016 06:10 AM

Re: Restoring Rusty
 
Which gaskets are you going to use with 6.0?

Exhaust not 6.0L ;)
Posted via Mobile Device

Gregski 10-01-2016 10:35 AM

Re: Restoring Rusty
 
2 Attachment(s)
Quote:

Originally Posted by Wide Open (Post 7729758)
Which gaskets are you going to use with 6.0?

Exhaust not 6.0L ;)
Posted via Mobile Device

wait what? that's not an LS under my hood? ha ha

I hope to git these round port aluminum Mr. Casket ones Part # 7402G (G is for custom made for Greg I think) which I already owned once, but like a fool returned

Wide Open 10-01-2016 11:04 AM

Re: Restoring Rusty
 
Yeah I saw those and wondered if you were going to use them or those never have to retorque ones.
Posted via Mobile Device


All times are GMT -4. The time now is 01:13 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com