Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Your making good progress to be hurt and moving at the same time that a nightmare on the back you have good looking little truck when your done
|
Re: Restoring Rusty
Nodoubt... Paint is getting really expensive... and to me, 16 bucks a can is like $21 Canadian... re-frickin'-diculous! My truck's on her way to the shop tomorrow, so I'll update progress in a new thread :)
|
Re: Restoring Rusty
Hope all goes well for you. I hope you have a place to move to in your sour time. I absolutely hate moving. Last time I moved my wife and I moved 70 percent or more of our stuff ourselves. Then my few friends came over on a Saturday and we moved the heavy stuff. I'm still looking through boxes....grr.
|
Re: Restoring Rusty
Hope you get it all packed up and labeled, intime.
We got a new place, last June,moved in Dec,using the Jimmy's ,still finishing up the reno's. And now my garage is full of wood for the deck and fence... Good luck |
Re: Restoring Rusty
quick update, found a new house for rent, got approved, got moved in on Fathers Day - thanks to a buddy with a "complete" truck, my baby bro and our soon to be sis in law) all in about 3 days, it has been insanity on wheels, liking the new place, its a one story this time, (thank god) with a three car tandem garage, so it looks like a two car from the outside, the back is feeling better, far from normal, but better, Rusty and parts is all that remains at the old place, gonna visit him, and paint the frame today, pics will be available if/when Comcast moves our service (lord I pray it goes better than last time) lol, thank you all for wishing us well, much appreciated
|
Re: Restoring Rusty
Glad to here your feeling better and got move
|
Re: Restoring Rusty
Best of luck with Comcast, Seinfeld episode hit it right on the nail...lol
|
Re: Restoring Rusty
3 Attachment(s)
so here is what the back of the cab looks like after the paint dried, I am quite happy with it
|
Re: Restoring Rusty
2 Attachment(s)
mandatory before and after pics
|
Re: Restoring Rusty
2 Attachment(s)
on your mark, get set, paint
|
Re: Restoring Rusty
3 Attachment(s)
i bought a Pint this time of semi gloss POR-15 because I am terrible at storing left over paint, it always goes South on me, also a pint was more than enuff to paint what I needed, unlike spray cans, this stuff goes a long way
parting shots of the rusty frame |
Re: Restoring Rusty
4 Attachment(s)
yes I had plans to start at the back of the cab in the middle and work my way out and back, but then I thought why don't I paint the cleanest bits first so I don't dip a dirty paint brush back in the can and contaminate the material, that and I didn't want the paint running down the brush handle and down my arm too early in the game if I was to paint the underneath bits too soon, you get the idea
|
Re: Restoring Rusty
Thumbs up...
|
Re: Restoring Rusty
3 Attachment(s)
somewhere along the way I decided I wasn't going to paint the leaf spring bracketry (more on that later, hint: we will be lowering Rusty)
|
Re: Restoring Rusty
3 Attachment(s)
did the same on the drivers side, they just weren't cleaned up to my standards so I will deal with them when I mess with the suspension
|
Re: Restoring Rusty
2 Attachment(s)
slalomed around the shocks even though we will be replacing them, I just think it looks tacky when people paint carelessly
|
Re: Restoring Rusty
2 Attachment(s)
I did come back and paint these bumpy bump preventers
|
Re: Restoring Rusty
1 Attachment(s)
looks pretty good, I will take some pics once it dries, remember it is semi gloss, so it ought to flatten out
man this was a lot of work, painting the insides of the frame channel with the exhaust mounted up was difficult, I removed the tail light wiring harness on the drivers side, and loosened the rear hard brake lines on the passenger side and used a bunji cord to pull them away from the frame, but still doing the Michael Angelo whilst laying flat on my sore back to paint the bits underneath was horilble |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Details... Good job.
|
Re: Restoring Rusty
I use por15 on every thing I build
|
Re: Restoring Rusty - Painted Frame
5 Attachment(s)
pulled the truck out of the garage today to take a better look at the frame all dried outside, it turned out great, I like it
what do you all think? |
Re: Restoring Rusty
2 Attachment(s)
started to put the bed back on, it's amazing what the kids will do when you promise them Internet / WiFi hook up at the new house, LOL
|
Re: Restoring Rusty - Prepping for the newer bed
2 Attachment(s)
didn't want to scratch up the newly painted frame so at first my son and I thought we could wedge some 2x4s under the bed to protect it while we slide it on, that plan never materialized, so we went with plan B, we used the large rubber mats instead, worked great
|
All times are GMT -4. The time now is 03:54 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com